I am using windows 7 and can't get the print drives to load for F2210 printer

I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

Hello @Imvertical 
Welcome to the forums!
I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try. 
To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
Next:
Perform a Level 3 uninstall.
There are 2 ways you can run the uninstall:
From Original installation CD:
1. Insert CD into drive, and then cancel the installer
2. Click Start and open 'Computer', and then right click on the CD drive and open
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
If software was downloaded and extracted to your system:
1. Click Start and type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
3. Open folder Util
4. Open folder CCC
5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
10. Run the download to reinstall the printer
Please let me know if the installation worked after the Level 3 uninstall.
Good luck and have a nice Wednesday!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

  • My modem is down and can I get the jump-drive to install OS X Lion?

    I was informed by my ISP (Hughes.net) that my modem is not functioning to download large files.  They are sending a new modem;  in the meantime I paid for the Lion upgrade and cannot install it.  Can I get the jump-drive sent to me?

    The flash drive version would be a new purchase ($69).

  • I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha

    I have
    Windows XP, 32 bit and can not get the flash player to load
    . Do not know what version I had to start with. When I
    try to load the 10.3 version it gets to 50% then tells me
    to close the Internet explorer and bartshel!
    If i do this then there is nothing left to load.
    I tried to save it to my desktop but then itt says no active thread foun
    d. How do I load it without my Internet being open and a
    dobe site up and running when it tells me to close them?

    Thanks the address you gave me gave me what I needed but still had alot of trouble with the game. Come to find out it was my browser IE8 that was causing all the problem. So I changed to google chrome and loaded the regular version of Flash player and have been able to get on the game. Now i have trouble with my plugins can you send me a link to find Adobe flash player plugin 9.0.124.0?
    Date: Tue, 6 Sep 2011 19:39:16 -0600
    From: [email protected]
    To: [email protected]
    Subject: I have Windows XP 32 bit and can not get Adobe flash player to load!!! Do not know what version I ha
    Hi,
    Could you download the appropriate version of the installer from the following page?
    http://forums.adobe.com/thread/889580?tstart=0
    Once downloaded, please quit all of your browsers and launch the installer.  If it still fails, please restart your system and try again.  Let me know how it goes.
    Thanks,
    Chris
    >

  • After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I see my buddy, but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies.

    After years of owning all things Mac, I am finally trying to use iChat, and can't get it to work. I am using gmail, and I see my buddy (no camera icon next to her name), but all I can do is send a message--the video and audio chat icons are gray, as is inviting to a video chat under Buddies. My buddy has the same problem as I.  We are able to do video chat through gmail, but I had hoped to use iChat.  I am using OS 10.6.8, iChat v. 5.0.3.  What am I missing?

    HI,
    iChat will Video chat to another iChat in a Jabber Buddy List (Google run a Jabber server for GoogleTalk)
    However it will not Video to the Web Page login to iGoogle or the Web Mail Page login.  (where people can Google Chat as it were in a  Web Browser).
    Nor does it video to the Google Talk Stand alone app for PCs or any other Jabber apps on any platform.
    iChat uses a connection Process called SIP (Session Initiation Protocol) which is also used by other VoIP devices.
    Jabber/XMPP invited the Jingle Protocol for Jabber Applications.
    Google have included this in their Standalone app and the Plug-in for Web Browsers on both PCs and Mac (you can get this as a Standalone Plug-in or as part of Chrome)
    More on this here  This article has been changed several time in the recent months.  It now claims a greater involvement by Google in writing the Jingle Library (Although now Google's version does not work with the others)
    This tends to mean that using the web Login to Google to Chat also cannot video chat to other Jabber apps that are using Jingle.
    If your Buddy is using iChat then check the Video Menu has two items to Enable Camera/Video chat and Microphone/Audio chats are ticked.
    In the View Menu the Show Status Items should be ticked (Selecting them toggles the tick and the function On or Off)
    It could be Internet speed but at this stage I would doubt this at this stage.
    10:27 PM      Saturday; January 21, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    Try selecting the T tool and then doing a reset (see image below)

  • I'm trying to export my masters to use in Lightroom, can't get the ratings to export. Tried writing the IPTC to masters and exporting with an IPTC4XMP file, no luck. These are all .jpg files. The ratings export OK if I export the versions. Any suggestions

    I'm trying to export my Aperture masters to use in Lightroom, can't get the ratings to export. Tried writing the IPTC data to the masters and adding the IPTC4XMP file when exporting, neither worked. The ratings show up in Lightroom if I export the versions. These are all .jpg's that I am exporting. Any ideas on how to fix this?
    Thanks

    There are two problems here:
    1) Aperture does not modify its "original" files on export.  Meaning with the JPEG files that Aperture will NOT modify them, and it will not write IPTC data to them.  It exports the XMP sidecar files, as you're seeing.
    2) Adobe will NOT read IPTC sidecar files for non-RAW images.  So if it sees a JPEG file, it will not look for an XMP sidecar file.  It just doesn't read them, so the data won't be imported by Lightroom.
    If you are using JPEG files, then probably the solution is to check the box in Aperture to tell it to write XMP metadata to the original files.  They're not RAW files, so they're not proprietary in any way, so writing the XMP metadata to the JPEG files is probably pretty safe.

  • If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

    If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

    Hi Blands02!
    Here is an article that will help you troubleshoot this issue:
    Find My iPhone Activation Lock: Removing a device from a previous owner’s account
    http://support.apple.com/kb/ts4515
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • HT1600 I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing? I am able to get the 'Home sharing' 'user and password on my Mac.

    I have an Apple TV 2nd Gen, iPad 2 and can't get the icon to appear when i swipe from left to right. What am I missing?
    I am able to get the 'Home sharing' 'user and password on my Mac.
    Also using IPad 2 I am able to get the ITunes to accept the user name and same password as the Mac.
    However, the only way I can see the 'Home sharing; icon is in Music on the Ipad. When I tap on the Icon it asks for a password.
    When I give the same password, it is rejected.
    Help!!!!
    Jaxxdiggs

    Personally I think the iOS devices are poor at reconnecting  - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
    Something along those lines anyway.
    I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
    AC

  • Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...

    Used CS6 for a year or more, now says it's not registered! I have 1 or 2 unused keys but do not want to use them. Can't get the CS6 applications to open to enter the codes I was given when I first registered them...

    You'll need to use web chat. This file shows you links to Web Chat:
    Adobe ID, sign in, and account help

  • I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help

    I have reinstalled mountain lion on my MacBook Pro and can't get the games back App Store says they'll already installed how can i download them can anyone help

    I have eactly the same problem - it seems that the downloaded version on MBA is version 6.0 and on iPad is is version 2.0 -
    Issue is when i tried to save the presentation on MBA Keynote 09 - Keynote crashed.
    I tried to save is as Powerpoint in MBA and it crashed as well!
    Message was edited by: Innovaxin

  • I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut plays fine " HELP !!

    I am on a MAC PPC G5 with OSX 10.5.8 and can't get the Leopard disk to stay in the drive, although " Woodstock - The Director's Cut " plays fine, HELP !!

    Yes it is the right Disc...
    2Z691-6040-A  (OEM) Drop-in DVD...
    System Requirements 
Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor. User must already have 10.4 or above to install this 10.5 upgrade.
    Compatibility 
eMac (2005), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), iMac (Mid 2006 17-inch), iMac (17-inch Late 2006 CD), iMac (17-inch Late 2006), iMac (20-inch Late 2006), iMac (24-inch Late 2006), iMac (20-inch Mid 2007), iMac (24-inch Mid 2007), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), Mac mini (Late 2006), Mac mini (Mid 2007), Mac Pro, Mac Pro (8-core), MacBook (13-inch), MacBook (13-inch Late 2006), MacBook (13-inch Mid 2007), MacBook (13-inch Late 2007), MacBook (13-inch Early 2008), MacBook Air, MacBook Pro, MacBook Pro (17-inch), MacBook Pro (15-inch Glossy), MacBook Pro (15-inch Core 2 Duo), MacBook Pro (17-inch Core 2 Duo), MacBook Pro (15-inch 2.4/2.2GHz), MacBook Pro (17-inch 2.4GHz), MacBook Pro (Early 2008), Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD), Xserve (Late 2006)
    http://www.welovemacs.com/2z6916040a.html
    I'd try to find another Mac to make a DMG of it & burn a copy to see if that works better.

  • I just received my macbook from the apple store and can't get the track pad to swipe at all  it will scroll up and down but no other features work!! all works on the magic mouse though

    i just received my macbook from the apple store and can't get the track pad to swipe at all  it will scroll up and down but no other features work!! all works on the magic mouse though!!
    any help would be greatly appreciated

    >Preference>Trackpad.

  • When I try to get the key code for office it tells me its already been used.  My mac had a new hard drive in its first year, could it be because of this?  How can I get the office I've paid for but never used?

    My mac had to have a new hard drive in its first year.  Now, when I try to get the key code for office it tells me its already been used.  How do i get the office I've paid for but never used?

    The product key is sent to you by email as part of the purchase confirmation.
    If you have lost it, log into your Microsoft account.

  • How can I get the number request's (count) for One interface

    Hi Guru's,
    I have a requirement,One interface say Hello world._How can I get the number request's (count) for this interface_.I thing with BAM it's possible.
    But I have no idea about BAM.If is there any alternative please give directions and instruction how to achieve this task.
    Can any body help.Thanks in advance.
    Regards
    Mani

    You have to query the SOA_INFRA schema to get the answer.
    Build a select query in cube_instance table.
    Thanks,
    Vijay

  • How can I get the CODEC DVCPRO HD 100 for Premiere CS5?

    how can I get the CODEC DVCPRO HD 100 for Premiere CS5?

    I did...not good luck so far, any suggestions?
    ¡Mucha Luz!
    Tao Mijares
    CEO
    Mucha Luz! Productions LLC
    310 994 7154
    Sent from my Samsung G5 4G LTE smartphone

Maybe you are looking for