I am using Windows 7 and the screen goes blank like like it went to sleep, what can I do?

pavilian slim line s5-1120 pc

I had this same issue on my PC but resetting the Video Card driver, or user Login, etc did nto work. I booted up in Safe Mode and then tried to look at Windows Event Log and found that it was not running. I must have had a virus because it turns out that 95% of the Windows Services were DISABLED on my PC. I ran a Full AV Scan and a Full Malware Scan, then I had to go through and manually start all of the needed Windows Services one by one. I made good educated guesses as to which ones NEEDED to be running versus which ones I could get back to later. Some of them still needed to be started again after I rebooted for certain functionality but at least I was able to do so in standard boot up. Hopefully this helps. others since I was looking around online in a dozen different forums before I checked the Services on a hunch.

Similar Messages

TS3274 Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy

I have an Iconia 8 w1-810. I put in my password and the screen goes blank

I have an Iconia 8 W1-810. I can put in the pasword but then the screen goes blank. The password is correct, it tells me if I put the wrong one in. If i then press the power button and get the log-in screen up, but it says it's locked and disappears again. I can use the camera and when a mesage from macafee came up I could click onto the inyernet, but when I closed the tab down, the screen was still blank. Any ideas please?

Storm73,
Try the steps in this article to see if you can get to the advanced options and possibly run a start up repair or refresh to see if that fixes the issue.

Charger blinks and the screen goes blank...help!

i purchased my macbook in may 2011...whenever im using it ,it just goes blank the light on the charger starts blinking and doesn't turn on again...i have taken it to the apple service center 3 times ,the guy does something and it works and then the same problem arises ....any solution to this problem? can i get a new macbook?

This is the MacPro forum (desktop computer). Best to ask your question in the right (MacBook) forum.

Can anyone tell me why my ipad screen turns on but there are no icons displaying at all and the screen goes blank i have tried to reset it on numerous occassions but still the same is anyone having the same problems if so how do i rectify this

as above can somone please explain if they are having the same problems ????

However after part of the Itune update completed a message came up on the screen
saying "The feature you are trying to use is on a net work resource that is unavailable.
Which particular .msi file does the message go on to say cannot be found? (Several different .msi files might be mentioned in this context: itunes.msi, bonjour.msi, AppleSoftwareUpdate.msi, etc.)

My ipod touch is flashing white on and off, I hold the buttons down, and the screen goes black- but the apple logo does not come on. What do I do?

So I have had this problem before, and know that you hold down the top Power button and the Home button, at the same time, for roughly 10 seconds, or until the apple logo comes on.
The problem is, when I press the buttons and the screen goes black, like it's supposed to before the logo pops up, the apple logo isn't appearing.
I was wondering if that's because my I pod touch was drained when I plugged it in to charge, and I tried to turn it on when it was still charging?
What can I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

Hi Emma,
Thank you for using Apple Support Communities.
I understand that your Thunderbolt display is just showing a black screen when you boot your computer. The following article should be of help in troubleshooting your display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
Jeff D.

I am trying to use Adobe Color and the screen won't load

I am trying to use Adobe Color and the screen won't load. All I get is the 4 spinning squares in the center of the screen. I Am using a Mac. Any help would be much appreciated.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Store and sign out and sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.

HT1926 iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

iTunes won't install everything it needs to run. I remove it from my computer and reinstall it and it keeps saying it. I am using Windows 7 and the latest update from iTunes.

What does the error message say when you install iTunes and it fails?
This post was edited by Malignance

When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

When using bbbc I player the screen goes black after 30 secs and only get audio. I have latest version of the app and also tried via web browser. Any advice it is so frustrating

Is this an app bbbc? IF it is I would contact the app developer and see if they can resolve the issue for you.
also take a look at the reviews and see if other users are having the same issue and see if they have a resolution.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs or so, then the machine shuts down and restarts.

My MacBookPro (mid 2012) will not complete the boot process. Yosemite's progress widget gets about 1/3 to 1/2 way across when the logo disappears and the screen goes all white for 10-15 secs, then the machine shuts down and restarts. This sequence will repeat seemingly forever unless I shut it down manually.
I upgraded to Yosemite from Mountain Lion a couple months ago, skipping Maverick completely, and I've done any associated updates that Apple told me about. I don't recall which version of Yosemite I have, but I'm sure it is the "latest and greatest".
I've tried re-starting in Safe Mode / Safe Boot and that does the same thing as described above except without the endless restarts. Instead of restarting at some point, SafeBoot proceeds to the white screen and then it hangs until I restart it manually. (I've waited as long os 20-30 minutes with no response).
When I tried the option-command-p-r key combo I never get any chimes or other noises besides the original 1 time boot sound that you would expect to get when starting up a macbook pro.
I was using the mac quite normally (meaning I was doing work I normally do on it and there was no indication of anything wrong) immediately prior to this happening.
The machine is BootCamp(ed) with Windows 8.1 which I use from a VMWare virtual machine instead of natively so that I can have both OSes running at the same time. I also think this is unrelated to my problem. I have been using this setup for more than 2 years.
My upgrade to Yosemite was uneventful and I thought it went well and was very smooth. I don't want to lead attention away from Yosemite, but at this point my problem does not seem related to the upgrade.
Any help is appreciated.

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

HT201263 None of these answers help my problem. My ipad will not leave the Apple logo. I hold both buttons and the screen goes black, then the apple logo immediately pops back up. I can't do anything because the apple logo just keeps popping back on.

I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.

Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore

I start my mac book pro and the screen goes white with an apple in the middle

I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off again

Reinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How come everytime i add an image to my pages document the screen goes blank and then closes the app?

How come everytime i add an image to my pages document the screen goes blank and then closes the app?

Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy

I am using Windows 7 and the screen goes blank like like it went to sleep, what can I do?

Similar Messages

Maybe you are looking for