I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2. I have been told it is a codec clash?

jamesb
Premiere Elements 13 Windows 8.1 (assumed 64 bit).
From what I have read, the Canon XF100 uses the MPEG2 Long GOP video compression, however it uses a MXF file extension (container/wrapper format).
Premiere Elements (any version) does not support MXF files.
Based on existing information, you would need to convert the MXF file to another format which is supported by Premiere Elements.
Apparently lots of the MXF converters available online.
Have you been there and done that?
ATR

Similar Messages

HT1212 I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your

I am locked out of my iphone. In resetting my passcode I must have hit a wrong digit, because the 4 digits I thought I used Don't work (and of course not my old passcode). I have tried the instructions both for "if you have previously synced your device with iTunes" and "If you have Never synced your device with iTunes" . Neither has worked and I'm in a vicious circle with each time after lengthy downloads it still all ends with the program, & my phone, asking for my passcode to proceed. I'm not sure if I have ever synced to my mac book (i may have) but my address book seems to automatically update on both devices without the need to plug in. Thank you for any knowledgable help that could efficiently get me out of this passcode ****!

Hi DRussell,
If you have not sync'd your device to your Mac then you will have to force the phone into recovery mode and restore as a new device. Read the information in this link and follow the instructions to recover the phone:
http://support.apple.com/kb/HT1808
Hope this helps!
Cheers,
GB

Flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11

I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

Can i install windows 7 via bootcamp (MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air. In bootcamp i allocate the partition then i click install and bootcamp will not see the disk.

Can i install windows 7 via bootcamp (on my MB Air) while using remote disc? I put the windows 7 disk in my macbook pro drive, and connect to my brand new macbook air via remote disk. In bootcamp (on my air) i allocate the partition, then i click install, and bootcamp will not see the disk from my macbook pro's drive. How do i get the bootcamp assistant running on my MB air to automatically find the disk in my macbook pro with the ISO image of windows 7? The remote disk on my air can find the cd but bootcamp will not begin installing it. Anyway to do this without buying the damned usb drive?

I don't know first hand if you can use the Remote Disk option with Windows but as of 10.7.2 you can now use BCAssistant to make a bootable USB (thumb drive or external disk) W7 installer with the Boot Camp drivers installed also. Have you tried that yet?

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Using windows 8.1 and photoshop cs4 the font size of the MENUS is so small as to be almost unreadable. how do i make the menu fonts larger. this is happening also with bridge

Thank you so much. You are absolutely right. I will have to reduce the screen density when I work with those programs.
Thanks for your trouble and regards
Quentin Sussman
<mailto:[email protected]> [email protected]
Cell: 082 4900 124
Home: 011 883 2582
Fax: 086 680 7981

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

Playing back Recorded TV Programs using Windows Media Player and only hearing Sound from Front Speakers

Hi All,
I have Windows 7 Ultimate 64-Bit Service Pack 1 with Windows Media Player 11 installed.
When I click on one of my Recorded TV Programs to watch and hear, I can only hear the Sound coming from the Front Speakers.
When I right-click on the Program and open it up in Real Player Cloud. I can indeed watch the program and hear Clear Sound coming from all 5 Speakers plus the Subwoofer.
What setting do I change to use Windows Media Player and have sound coming from all 5 Speakers and the Subwoofer?
Thank you!
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

Hi Andreas,
Thanks for the reply.
The link you put up, takes me to the page, but
"The requested URL /surround/www_lynnemusic_com_surround_test.wma was not found on this server."
That was WaterFox.
The webpage cannot be found
This in Internet Explorer 11.0
The Files in question were Recorded by Beyond TV to my Local Hard Drive.
When I open the recording in Real Player Cloud, installed on my computer, not streaming over the Internet, I hear it correctly played.
When I use Windows Media Player, nothing can be heard from the Rear Speakers.
Speakers and Hardware are working fine.
thecreator - Running ASUS P5N-D Motherboard with Windows 7 Ultimate - 64-Bit with Service Pack 1 installed.

I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

I'm using Windows 8.1 and the browser won't load any web page. I downloaded the latest one from the website. Any help would be great. All other browsers work.

Hi curtismoxam,
Please try these troubleshooting steps: [[Fix problems connecting to websites after updating Firefox]]

I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either.

I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either. How can i locate it or toggle it to turn on again?

I'm not sure what artboard view is, sorting and naming artboards is not available in CS4 either, sorting however is possible via script workaround,
Introducing: re Arrange Artboards v2 Script

I'm Using Windows 8.1 and I have just installed Creative Cloud Desktop but whenever I attempt to log in it then signs me out

I'm Using Windows 8.1 and I have just installed Creative Cloud Desktop but whenever I attempt to log in it then signs me out
I have tried logging in and out and reinstalling but still fails to sign me in

contact adobe support, http://helpx.adobe.com/x-productkb/global/service-ccm.html

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Hi to all, I use Windows 7, 64Bit and Lightroom 5.7, Camera Raw 8.7, when I develop or export files (mostly Raw Fils from Nikon D810) after 10 to 20 pictures my computer shuts down or I get a bluescreen. Please tell me why.

Blue screen/Computer shuts down is almost always a hardware malfunction or a driver problem.
Make sure your video driver is up to date.
If it is, then the next suspect, in my mind, is overheating, make sure all of the fans in your CPU case are working properly.

Using Windows 8.2 and copying large files over USB 3.0 to Segate Backup Plus USB hard drive - I get the following error:-

Using Windows 8.1 and copying large files over USB 3.0 to Segate hard drive - I get the following error:-
Error 0x80070079: The semaphore timeout period has expired
Using Windows 8.1 with a 3 - 4TB USB Segate drive that is using Microsoft's bitlocker. It seems I can copy small files w/out issues; however, copying large files and directories causes this error. Connectivity is USB 3.0 from a Dell
Latitue3 e6520 to Segagate drive.
Can anyone share fix or determine methodology to fix?

Hi Joe,
Was the error gone when you turned off the Bitlocker from this drive?
If no, please refer to this similar thread's solution to resolve:
https://social.technet.microsoft.com/Forums/windows/en-US/c3fc9f5d-c073-4a9f-bb3d-b7bb8f893f78/error-0x80070079-the-semaphore-timeout-period-has-expired?forum=itprovistanetworking
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I am using Windows 8.1 and Prem Elements 13 and Elements is not seeing my recordings on a CF Card The camera is a Canon XF 100 recording in Mpeg2

Similar Messages

Maybe you are looking for