I am using Windows XP. I have loaded Firefox, but it will not launch. I had success loading and launching on my other computer that is running Vista. I need help please? I do not get an error message.
I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help!
== Each time I try to launch Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Do you have NoScript or Flashblock or some similar Extension installed? If so, are you allowing the site, at least on a temporary basis, access by such an Extension?
Your Shockwave for Director is out of date. You can check here: http://www.mozilla.com/en-US/plugincheck/
To update it, use the link on the page below under "Installing Shockwave", download and save to your hard drive, close Firefox, click the file you downloaded, after the install, open Firefox and check on the above link again.
https://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
Similar Messages
-
I'm using Windows 7 I downloaded Firefox 17 It will not load I go to uninstall and it will not uninstall. When I am using Thunderbird I try to go to a web site and I get the error code couldn't load xpcom.
How do I unistall this mess and start over again???Please go to www.getfirefox.com and download Firefox 24 (don't use Firefox 17 it's not supported) and install it.
-
I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I purchased an album from iTunes using my desktop computer. All of the songs from the album are on my computer and play perfectly. When I try to sync the songs to my iPhone or iPad, I get an error message that says 3 of the songs can not be downloaded to these devices. Any ideas?
Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though
-
I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!
You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org -
I have Safari 7.0.6 and OS 10.9.4. I cannot install any extensions. Everytime I select install I get an error message, "Cannot instal extension" Does anyone else have this problem?
Thanks SteveBack up all data before proceeding.
This procedure will unlock all your user files (not system files) and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.
Step 1
If you have more than one user, and the one in question is not an administrator, then go to Step 2.
Triple-click anywhere in the following line on this page to select it:
sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Start up in Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open. In that window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
▹ Restart
from the menu bar. -
All I want to do is share my calendar and contacts w/my other computer that a family member uses?
If you all log into iCloud with the same AppleID, then you can all have access to the same Contacts, Calendars, Mail, Notes, Safari Bookmarks. Or, you can only select some of those, but individualized iCloud email would not be possible. That's probably not really what you want to do, though.
You can also just share out your Calendars via iCloud, no need to use same AppleID. They can subscribe to them and I believe you can authorize them to make changes.
Looking at Contacts, it does look like you could create another iCloud account, independent of the iCloud account in the iCloud system prefs, but I don't have another to test at the moment. If that works for the Contacts, they would have their own set and yours too. -
I have tried to upgrade Painter 11 on my iMac running OS x 10.5.8 but get the error message : The following install step failed : run pre install script for Corel Painter11_SP1. Contact the software manufacturer for assistance "
I have contacted Corel and after several emails and one telephone call, they tell me , they cannot help but they think the problem could be with the OS.
Does anyone have any suggestions, please ?Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward. -
HELP!! I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.
I'm getting an error message while trying to sync my iPhone 5 to iTunes. Appreciate support.
Click here and follow the instructions.
(60852) -
Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.
Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2 -
The full error message is the following:
XML Parsing Error: Undefined entity
Location chrome://mozapps/content/downloads/unknown content type.xul
Line Number 30, Column 18In order to use ''nxm://'' links, Nexus Mod Manager must be installed and associated with the ''nxm'' protocol.
* http://www.nexusmods.com/skyrim/mods/modmanager/
In case of problems with this third-party program, please refer to its support forum:
* http://forums.nexusmods.com/index.php?/forum/1413-nmm-code-development-chat -
Login Failed Unix initialization LoginExceptionI/O exception trying to connect to Unix service
It looks like portal is not able to reach the doUnix process. Do the following
# ps -ef | grep doUnix
now check to see if the process below is running
root 9718 1 0 Dec 12 ? 0:00 /install_dir/SUNWips/bin/doUnix -c 8946
if not do a restart of portal and check to see if that process is running you would need that process for unix authentication to complete .. -
Need help with installation of Photoshop Elements 13, Error message 6?
I tried installing on both a windows 7 and 8.1 computer. Both installs ended with error message 6, a failed install."this installer does not support installatiin on a 64 bit windows operating system. Please download the 64 bit version of Photoshop elements."
What should I do?download the 64 bit version seems like a logical step.
if you follow all 7 steps you can directly download a trial here: Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
Help please - cannot restore due to Activation Error message??
I have my husband's iPad and he has recently passed away. His iPad and iPhone say the following message" Activation Error: This device is not registered as part of the iPad developer Program...I've tried to restore them but they won't allow me. Help??
I don't want to lose any of his photos, am pretty sure he backed up before he passed away.
I can't use any of the devices because they are disabled.
I've tried setting them into Recovery Mode but it keeps stopping halfway through and telling me that the iPad cannot be restored.Error 1604:
This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the USB 30-pin dock-connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and re-open iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Maybe you are looking for
-
Two questions about my "new" used Macbook
Hello everyone, I recently bought a Macbook for my wife from craigslist. It is a early 2008 model (http://www.everymac.com/systems/apple/macbook/stats/macbook-core-2-duo-2.2-white -13-late-2007-santa-rosa-specs.html). I have two questions regarding i
-
IMovie "green screen" feature has serious problems.
I precisely followed the iMovie "help" instructions to make a green screen effect for what should have been a simple iMovie project... a 10-second video tagline for closing titles on a much more extensive project. According to iMovie help, it should
-
Why did imessages log me out, Why did imessages log me out
If you are having this same problem with the new iOS update. Then i tried all the resting stuff. It didnt work for me. But just recently i took off my ipad case and everything worked. So. I would they it couase my case is an otter box. So p,ease try
-
Maybe OT, but according to Adobe docs, I should be able to hit "Cmd" + F9 and open the script window. It doesn't work. Do I need to enable shortcuts or something? TIA, beno
-
Fixinf Blank Fields in Adobe reader 11
I am using Adobe Reader 11 and I get lots of forms sent to me. Some of them have blank fields when I open them up but the content shows when I click on the field itself. My research on the web seems to indicate that these are forms sent from MACs. Is