I am using XNET CAN on a PXI system. When I modify the can database I get the error "the interface has already been opened.."

I have tried both building the XNET session from project explorer and by building a signal list in the VI.
Any suggestions? Thanks in Advance.

Thanks for the reply. I don't think I have any interface open. But to be sure, I rebooted everything - same result.
Is there some step in the project config that I am failing to do? In the PXI systems I had before XNET, I had to setup some CAN configuration stuff in MAX to get it to work, but I don't see that option anymore with XNET....
I have been sucessful in running XNET CAN VIs reading and writing the data from my database, but I stumble every time I add a signal or rename the database.
I made a simplified VI to illustrate, using a previously working database I now get the empty name message.(screen capture attached)
This is connected to a working CAN link, and I can see these signals in MAX properly.
Thanks in advance for your assistance!
Attachments:
vi_issue1.jpg ‏136 KB

Similar Messages

HT201441 I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

I bought iPhone 4s device from the owner and the previous owner is not present and the device has already been erased, how can I use this device using my Apple ID and iCloud

Hello adilx
The only way to get passed that and to use that iPhone is to ask the previous owner to remove it from icloud.com in the Find my iPhone section.
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/TS4515
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Click All Devices to open a list of devices linked to their account, then select the device to be removed.
Click the Erase button to erase all content and settings from the device. When prompted, don't enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device is erased and removed from the account, you can proceed with the device setup process.
Regards,
-Norm G.

I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?

I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?

No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

HT1766 Can you back up an iPhone if it has already been disconnected?

Can you back up an iPhone if it has already been disconnected? My daughter thought she had backed it up, but hadn't and she already has her new one turned on. She has thousands of pics and contacts she wants to put on the new one.

Hey elena68
You can as long as it still works powers on and can get to the Home Screen. Just follow the steps outline in the article below to get that taken care of.
iOS: How to back up and restore your content
http://support.apple.com/kb/ht1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problem report: "Can't open the illustration. The image has already been specified, it cannot be changed."

I got a problem with my files I created in Illustrator CS6. After I closed them and wanted them to open up again, this problem report popped up:
"Can't open the illustration. The image has already been specified, it cannot be changed."
If I click OK, there is a white site with nothing on it. No object, no pictures, nothing.
The Illustrator file has still the right size and when I start ArtFiles to collect all used pictures and fonts it's no problem.
In Adobe Bridge there is still a preview of the original file and I can see what HAS to be placed in the file.
Can anybody help me out?
We had to make all the work again for a presentation but this is not the solution for this problem if that will happen in the future again.
Thank you in advance!

Thank you for your answer!
Actually there is no CS5 installed on our computers (no more). I will try to get one from our admin. Hope this will work! In the meantime we had this problem several times.

HT201441 the device has already been the device has already been erased, but is still linked to the previouserased, i put the apple id & password for the previous owner witch i used to erase the phone from icloud but it still linked to the previous owner'

the device has already been the device has already been erased, but is still linked to the previouserased, i put the apple id & password for the previous owner witch i used to erase the phone from icloud but it still linked to the previous owner’s account what can i doing to rescue the phone pls
with my thanks

The Help page you came here from gives you all the information; without the previous owner's password or his removing the phone from his list of devices you cannot proceed and I'm afraid your phone is useless.

Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
May you help
Thanks

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

"can't open the illustration. the image has already been specified, it cannot be changed" in CS6

I received this error mesaage when trying to open a Illustrator CS6 file. "can't open the illustration. the image has already been specified, it cannot be changed"
This file contains my sketches. Hoe can I recover file?

Are you sketches embedded images, or vector? Do you have any additional plug ins installed, or any new recent fonts?
Have you tried your illustrator prefs. Run disk utility to fix any permissions. Set up a new user account, and try to open the file, if this works then we know there is a pref in your user account causing this, otherwise it is somethng in the global installation..
This problem happened back in 2012 to this person though no answer.
Problem Opening Illustrator File. "Cant Open the Illustration"

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Last time my lack of an admin password to alter the desktop interfered with the download and now it says the invitation has already been accepted so I can't retry... The team administrator says there's no resend option. What do I do?

Moving this discussion to the Adobe Creative Cloud forum.

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted??

I used to have a podcast that had been accepted on Itunes, but my I began to have problems with my host, so I changed host and created a new podcast, and I submitted my new podcast, Apple refused, and now says the feed has already been submitted? Maybe Itunes thought that I was someone trying to copy my old podcast because I kept the same name, I tried to change the names but it looks like I'm on a blocked list...

There is a procedure for changing the feed URL for a podcast, which it seems you haven't followed: you have to add a special tag to the old feed - just submitting a new feed will have exactly the effect you describe. The proper method is described here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move

HT204266 I have a balance on my iTunes gift card but when I try to redeem it, the message says the code has already been used and won't let me go on

I have a balance on my gift card but can't redeem it. When I enter the requested code the message says it has already been used. How do I redeem the amount left on my card?

Hi Rosemarie316,
If you are having issues redeeming your gift card, the following article will help:
iTunes Store: Invalid, inactive, or illegible codes
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
I hope this information helps ....
Have a great day!
- Judy

I have 15.00 on my itune gift card but when i try to download a song it`s saying the card has already been redeem,but you can still see the 15.00 at the top of itunes

i have 15.00 on my itune gift card but it`s saying the card has been redeem but i didn`t buy anything yet.You can still see the 15.00 in on my itunes.

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Had to rest the iPod. Now when I try to set up iMessage and face time it won't allow me as the address has already been used but on the same device. How do I fix tht

Had to reset the iPod and now I can't use the email that was on it before, it says the email is already being used. How do I fix tht?

Place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

How can I stop from getting the "Firefox is already running" error message when trying to open links and FF has already been opened through a symbolic link?

I use symbolic links and program shortcuts as a way to easily open different Firefox profiles ie. one for casual/personal use and another for work. This works well, but I get the "Firefox is already running, but is not responding" error message if I try to open external links with FF as my default browser. FF is actually open and running fine, but I guess it doesn't acknowledge this fact because of how I'm originally starting the process.
I wasn't able to add the symbolically linked executables to the default program pane. Is there a way to bypass this error or other way to fix this?
The solution to the question linked below is what I'm using to open the different FF profiles.
http://superuser.com/questions/255312/pin-same-app-multiple-times-in-windows-7

hello, this is probably happening when you run the default profile with the -no-remote switch.
http://kb.mozillazine.org/Profile_in_use

After one week of using Garageband, a exact copy of the app appeared. I deleted the copy but the also original app was deleted. When I try to downloaded from the App Store again, it appeared that the app has already been accepted but I can´t find the app

It appears that it is in the purchases list, but it is not there, HELP

The reason, I included the annotation that I'd upgraded my Itunes, (On my Computer) is B/C in many forums - the very first question, *HELPERS* ask, is. "Do you have the latest version of Itunes downloaded on your computer." I wanted to knock out any obvious replies.
Now- "DO YOU have any idea,"... how your UNHELPFUL remarks, do absolutely nothing but hurt others that might not have the EXPERIENCE you have? How do you expect people to know things without asking questions? Whew! RUDE!!
Message was edited by: Apple I0S Help Team

I am using XNET CAN on a PXI system. When I modify the can database I get the error "the interface has already been opened.."

Similar Messages

Maybe you are looking for