I am very unsatisfied with my C309 printer cutting the edges off my photos

I fully understand if I chose borderless that for some reason if cuts off about 2.5 - 3mm. when I try to prin 4x6. Is there any way around this? I have made adjustments and tried to change the overspray from default to least and this did nothing. I don't think that I should have to factor into account that I am going to lose data if I have my image saved exactly 4x6 from a photo software and want what I see on the screen to print exact same way. I had a previous HP printer and this was never an issue until I got this particular model.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

Similar Messages

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I get th

Basic Photoshop 101: I want to use an image with an outer glow in another Photoshop document. When I place the image, the outer glow has hard edges where the box of the image cut the glow off. Naturally, I want a soft feathered outer glow. How do I achieve that? Thank you.

That should work out, maybe edit it to force updating in the new image.
Could you please post a screenshot with the Layers Panel visible?

For 3 years my iMac and miniMac both communicated with a Canon printer and the internet using an Airport Extreme. Last winter, the miniMac lost printing via the Airpor and now can't communicate with the network at all.

For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet. More recently, I added an iMac and iPhone. PROBLEMS: A few months ago the Mac mini lost its connection to the printer, and now it cannot locate the network at all.

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Prints with caption/description printed on the back

What I want to do is order prints that have comments printed on the back.
Is there any way to do this within iPhoto and using the internal iPhoto print ordering? Maybe using Picasa 3?
If you have to go elsewhere, e.g. upload to Shutterfly, is there a way to upload the comments along with it? In other words, if I fill out the "description" within iPhoto, that info will upload and print to the back through the online service.
The only way I know how to do this is upload to Shutterfly and add the comments in their online system, but I'd rather be able to do it in iPhoto or Picasa.
Thanks so much, hope this was clear enough.

What I want to do is order prints that have comments printed on the back.
There is no way to do this with iPhoto.
As for Picasa and other non-Apple services you'll need to check with their support services.
Regards
TD

Problem with local users printing to the printer queue

We have just upgraded our servers to 2.8GHz Quad-core Intel Xeon which is running OS X 10.5.6
I have set up the printer queue to the network printers, through LPD.
Open directory users are able to print to the network printers without any problem however when a user local user to a machine (all 10.5.6 but different models) are not able to print.
The printer pauses and does not print.
Any solutions?

Hi there,
I am not quite sure of your setup based on your posting so apologies if my reply is not appropriate.
Are you saying that when the Mac attempts to print directly to the network printer (rather than via a queue created by selecting an Open Directory printer) the printer queue pauses?
If yes, then I would ensure that the LPD protocol was selected and the correct queue name was entered - as this can often cause the spooler to pause.
PaHu

How do I print on the back of 6x4 photo I have a photo smart 5520

I have 50 6x4 photos for wedding invite.and I need to print times ext on revers.

Hi,
I take it that you want to print on the non glossy side of the 6x4 photo.
You can do this by simply inserting the paperglossy side up in the photo tray but becasue the back side is not designed to take ink, the print quality will be very poor and it likely smudge and smear very easily. I'd recommend letting them dry for a long time and avoid hadling until they are dry.
The other alternative would be to get double sided (booklet type) media which would give good photo quality on each side.
"Although I work for HP, I'm speaking for myself and not on behalf of HP"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

I-photo 'order prints' limits the order to 300 photos and I have more.

Finally ready with creating a nice XL photo book with 100 pages and .. Oops, when I want to order prints of the book I cannot proceed. "The maximum of 300 photos is exceeded". Unfortunately there was no earlier warning about this limit. I prefer to have all 520 photos in one photo-book. Does anybody know a workaround ?

Contact Apple support - I was not aware of such a limit and have not seen it posted here before and I do not find any reference to that in a google search
What is the exact error message?
Can you preview the book -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
LN

My iPad will not load my photos from my pictures using ios5 iTunes. Works fine with my iPod. Does the fact I have photos taken on my iPad have any impact?

My iPad does not load my pictures folders from iTunes. It works fine to my iPod. I am using ios5 and a pc, does the fact I have photos taken on my iPad got anything to do with it?

Having photos that you took with the iPsd has nothing to do with this at all.
When you sync photos to the iPad, you can select one main photo folder only - as described above - using the sync photos from heading within the photos tab of iTunes. You can have one level of sub folders within that main folder as well that you can sync to the iPad.
All of the photos must remain selected to sync each time or the unselected photos will be erased from the device.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
Click on the "Sync Photos From" heading and navigate to the pictures folder on your computer that you want to sync.
Click on all of the sub folders within that main photos folder that you want to sync. You can select as many sub folders within that main folder that you want to put on the iPad as long as you use one level of folders only in the main photos folder.
Click on Apply in the lower right corner of iTunes

WebGL hangs Firefox 4 beta8: I'm very unsatisfied with this. The WebGL demo hangs the program totally.

Windows 7 on Laptop , AMD Turion 64 x2
he demo hangs, I cannot change very loud sound, there is no picture provided/shown. I have not been given a crash ID

Make sure that you have all system drivers, including the graphics display card, updated to the latest version.
A good place to discuss issues with Minefield 4 nightly builds and Firefox 4.0 beta builds at the mozillaZine Firefox Builds forum.<br />
You need to register on the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=23

How long does it take for the warehouse to show a phone as recieved so I can pay my final bill? I would like to sign up for Verizon again as I am very unsatisfied with my new company but cannot until this is resolved.

I recently switched to another competitor but would actually like to start from scratch with Verizon but cannot do so because they cannot locate my devices I mailed in to their warehouse. I switched my whole family's accounts, 3 phones and 1 mobile hotspot, to a competitor to get a cheaper rate and unlimited data but I have not been happy with their service and would like to switch back. The problem is when switching the first time I was told by a Verizon chat rep that I could send my Edge devices back in and would get credit for them and stop my edge payments which was not the way I know now it is supposed to work. After a couple of phone calls a supervisor looked at my online chat transcript and realized that I was correct and the rep had told me incorrectly that they would take my edge phones back and give me credit for them and I could close my account by only paying the early termination fees. She sent me two envelopes to send my two edge phones back in and said they would credit on my account and stop the monthly billing for them once they were received. I called a couple of weeks ago after being charged 24.99 for the both of them again for the month after my account was stopped. They said that they had not received my phones and I should have noted the tracking number from the labels the rep sent me so they could track them. I tried to find the tracking numbers but couldn't so I got back on live chat and asked them to resend me the letter from the supervisor rep as well as resending the labels and he said they could that and it should be 7-10 business days. It has now been over two weeks and I have not received the resent letter or labels so I cannot give them the tracking number to prove I sent my phones back to them. I have also researched the facility I was asked to send these phones back to and it seems this is a pretty common Verizon trick of making you prove you sent the phones and not giving you any access to the tracking numbers. I just want to pay my ETF's and close out my original account so I can start over fresh with Verizon but now I am losing faith in doing that as this is making me wonder if they are the type of company I want to deal with. Please someone who may have dealt with this help me restore my faith in Verizon and give me an idea of what to do next.

How recently did you switch? If it's less than 60 days, then Verizon simply reinstates your previous account. The fact that you were on the EDGE plan and mailed the devices back, and they apparently are somewhere in the system, could cause complications, and it might just work out that you just go back on the same plan and they set you up with the same devices. I'm not sure how it will go - but since you are still being billed for the devices...

Very disappointed with G5 and Final Cut Pro

At work we bought a G5 last year for Final Cut Pro to edit plain DV video downloaded from a MiniDV camcorder via Firewire. The machine has 4gig memory, 6800 graphics, and is running FCP 5.0 with all of the Software Updates installed. The G5 is supposed to replace a much older PC that is running Adobe Premiere 2.0 on Windows XP. Even though the PC only has a single Pentium 4 CPU and older ATI X800 graphics, it does FAR more real-time effects than Final Cut Pro does on the G5. Why is this?? Almost everything I do, from titles to minor effects will appear instantly on Premiere Pro, real-time, no rendering needed. But almost everything I do on the G5 will show me a big red X until it has rendered. If I add a title, I still have to wait for it to render. If I add a light blur effect, I still have to wait for it to render. This is very annyoing and very depressing, we spent a lot of money on the G5. In reality, at least for us, it is slower than the older PC it is supposed to replace forcing us to spend a lot of time staring at those big red X'es while Final Cut Pro renders.
Are we doing something wrong? Or is this the case with all dual processor G5s running Final Cut Pro 5.0?? Is there anything we can do to speed up rendering or enable actual real-time effects/titles?

Welcome to the family.
Are we doing something wrong? Or is this the case with all dual processor G5s running Final Cut Pro 5.0?? Is there anything we can do to speed up rendering or enable actual real-time effects/titles? < </div>
Simple failure to understand your new tools. Open the manual, run the tutorials. Study carefully the sections on how to set up all of your preferences for DV. It's easy and when you're done you're going to feel really silly.
If your company intends to make money with FCP you must invest time to understand what you bought since you bought it without bothering to test drive FCP on a G5. If you liked Premiere on Windows, you may never enjoy using FCP on Macintosh. The switch can be devastating. You could be one of those poor souls who just doesn't get it. Turn your system over to a more open minded person on your staff.
bogiesan

My Macbook Pro is very very slow with OFFICE.. when will the new office

come out? the one that is native to OSX... not using ROSSETTA or somehting?
Thanx!

I've never run into a word document or excel spreadsheet that didn't display properly in NeoOffice, and deal with dozens of office files each day. I suppose files with complex layouts may have issues, but I have yet to run into one. YMMV, I guess. In any case, it's native, quick, and free, so it doesn't hurt to try it out.
I've had really bad luck with Office on the Mac - buggy, slow, awkward non-mac-like interface, plus it installs junk all over your system (in typical MS fashion). Plus, it's fairly expensive. The next version of office shows some promise - the MS mac team supposedly did a serious overhaul on the interface and internals, but time will tell. The only thing I really miss is the AppleScript support - Office is very script-friendly.

My ipad is not syncing with my HP printer. The printer is a C4580 and I have an Ipad2 that I just recently purchased

Any ideas of where to start to fix this?

Here's an old post (from doing a search)
The C4580 is not an AirPrint printer. HP has a list of their AirPrint printers here:
http://www.hp.com/go/airprint
and Apple has their list here:
http://www.apple.com/ipad/features/airprint.html
Your one choice is to connect your printer to your computer and then get an app for the computer that routes AirPrint jobs to the printer. On a mac, buy Printopia. Don't know about a PC.

My internet is working very slow with my macbook pro, but the network is fine because my macbook air is working perfect?

My internet on my macbook pro is working very slow, but the network appears to be fine. My mac book air internet is working perfectly. Any thoughts?

Safari 6
1. Restart the router. Restart the computer.
2. Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    Develop menu will appear in the Safari menu bar.
    Click Develop and select "Empty Caches" from the dropdown.
3. Option click the "Go" menu in the Finder menu bar.
    Select "Library" and then "Caches".
    Right click "com.apple.Safari" and select "Move to Trash"
    Relaunch Safari.
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the box next to " Remove saved names and passwords".
    Click "Reset".
5. Safari > Preferences > Extensions
     Turn those off, if any.

HT1766 Has anyone else had a problem with their phone after using the cable to upload photos from Camera stream to computer photo program? My phone is frozen, cannot get into use phone, cannot connect to the Internet, and even APPLE is stumped.

I only have my IPhone5 for two months and am very upset that now they may need to give me a new phone and lose anything that may not have been recently backed up by the phone. Has anyone else had this problem? How did you reseolve it? Hard reboots did not help.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

I am very unsatisfied with my C309 printer cutting the edges off my photos

Similar Messages

Maybe you are looking for