I am wanting in input audio to a MacBook Pro running 10.9.4. Since there is only the internal microphone as an input choice, how do I accomplish this?

Not something I've ever done, but I found a 9-year-old article from MacWorld -> http://www.macworld.com/article/1041790/tapetocd.html - that explains it a bit. Apparently the only software that you need is GarageBand and a hardware interface. Just Google "copy audio cassette to mac" and you'll get tons of hits.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Similar Messages

I highlight genre in my iTunes library and it is sorted thus. The secondary sort is automatically artist. I want the secondary sort to be album. How do I accomplish this?

I highlight "genre" in my itunes library and it is sorted thus. The secondary sort is automatically "artist". I want the secondary sort to be "album". How do I accomplish this?

Can't do it.
You can use the browser (iTunes menu view > Browser) select a genre then sort by Album.

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Using iPhoto, I want to move photo from one event to another I export it to desktop and then reimport. Titles and other info vanish; only the original jpg number comes thru. How do I avoid this?

Don't do that - flag the photo and go to the target event and use the add flagged photo to selected event command to move it intact within iPhoto
LN

I recently purchased an Onkyo stereo receiver with a wireless USB adapter, UWF-1, and want to stream audio from my MacBook Pro through my stereo system. The receiver tells me it is connected to my wireless LAN, but I cannot get music to play?

New to the community here, thanks for your patience. I recently purchased an Onkyo TX-8050 Network Stereo Receiver with the UWF-1 USB adapter with the intent to stream audio from my MacBook Pro to the stereo. I have gone through the setup instructions for the adapter and the receiver gives me a message saying that it is connected to the password protected network, but that is as far as I can get.
I have gone into iTunes and clicked on the "Open Stream" option, but I just get a pop up box labeled "URL" that is empty. I have Home Sharing turned on and File Sharing turned on, but I am not seeing the receiver in my Finder window or as a iTunes device.
I would appreciate any and all advice and assistance.
Thanks so much.
Dan

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

I am trying to connect my server using an Ethernet to router and want to search the internet using another wifi router. How can I accomplish this?

I have a small storage server and want to connect to it via Ethernet. I also want to connect the internet using a separate Wifi router from my provider. How can I do both?

Set the service order to have wifi first.
System Preferences > Network > Click on the gear > Set Service order

Stream Safari/DVD audio from my Macbook Pro to my Airport Express.

Is there a good way to stream all audio from my Macbook Pro to my Airport Express? Not just simply the iTunes audio.

This does work in general but not for my particular need. I have a Mac G5 using ProTools and a MBox digitizing vinyl (USB connection). I am on a MBP getting work done elsewhere in the house, but want to listen to the music and especially to tell when album side is done. To get music to the MBP, I have plugged the G5's line inputs to the MBox line outputs, then used messenger to create a chat with the MBP. Too bad I could not get the G5's input to be the MBox, but ProTools wants sole control. Works OK, but the messenger output on the MBP will NOT go to the Apple Express, just the speakers or headphone out jack.

Is there a way to make an audio clip not cover the whole project? I want to add audio clip or song and let it start at a certain point in the project. I'm working with iMovie on IPad!

Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!

Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense...

My roland Ua-25ex usb audio interface audio input no recognised by macbook pro running osx 10.

my roland Ua-25ex usb audio interface audio input not recognised by macbook pro running osx 10. ...the audio outputs are ok but the (audio in) input preference for the UA-25ex is greyed out and the sliders for input volume etc are disabled ... and I can only record voice by using the macbook pros onboad microphone not the usb interface

Logic Users
Looooong Tutorial for beginners
MacPro Videos on Logic
i have all the logics but i don't know them deeply.
i like some of the music files/loops you get bundled with it, there's plenty to get started.

Audio not working MacBook Pro 15''

My internal speakers are not working and seem not to be recognized by the OS. I am running Lion. Under Preferences>Audio there isn't any option for the internal speakers. Headphones are still working.

I had the same problem and after a bit of research discovered that the line in is not getting enough input from an unpowered set of headsets. ALSO, the mic level was set too low and so nothing was being picked up.
Solution:
I have a Thunderbolt Express Dock (expensive I know but very handy) and plugging in through the express dock with the mic level up works great.
Alternatively, I also have a USB Headset Connector that comes up as a seperate device and also is able to take inputs.
Finally, if neither of these work, I found that the earth chassis on my Macbook Pro 15" was a bit unpredictable. I removed the base cover, cleanes the contact points (little silver spring loaded buttons on the edge of the main board) and where the contacted the cover and this also improved things.
Regards,
David

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x.

Just upgraded to MacBook Pro running 10.8.4. Want to convert old movie files to put in Itunes. Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade. Called Apple 2x. If you have a fix, you can email me direct at [email protected]

Want to convert old movie files to put in Itunes.
What does "old movies" mean to you? File type, audio and/or video compression format(s)?
Can't upgrade QT player preinstalled, so downloaded QT Player 7 and purchased QTPlayer 7 Pro registration code. Can not get it to upgrade.
Did you follow the instructions found here?
If you have a fix, you can email me direct at [email protected]
To which fix do you refer? Activatng QT 7 Pro or converting the files? Even with QT 7 Pro activated you may need to modify your QT codec component configuration depending on the file type and compression formats used to encode your "old movies." There may be many different problems here with each having one or more "fixes." Please try to be more specific regarding your questions. Converting a muxed VOB MPEG2/AC3 file would be very different different from converting an AVI DivX5/MP3 file depending on which application you are attempting to use.

My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

My MacBook Pro will not allow me to log in at the user screen. It sits frozen and will not prompt me to input my password.

If the normal restart doesn't work, and you restart on the recovery hard drive, from the choices of things to do window that appears, select Terminal, and in the Terminal window type: resetpassword and then press enter. You will have a window with the users to choose from to reset the password. Select the one you want and you will be able to reset the password, double entry of course.

I want to burn music cds on my iMac that I can use on other cd players not just on a pc or mac how do I do this?

I want to burn music cds on my iMac that I can use on other cd players not just on a pc or mac how do I do this?

Hi, neighbour!
Create your playlist in iTunes, making sure it will fit on a CD (time and size of playlist shown at bottom of window).
I think as you're in Lion, it'll be iTunes 10? If so I believe the burn option is now in one of the menus - probably 'file', but it shouldn't take much finding).
Selecting Burn should give you a dialogue some thing like this;
(This is iTunes 9, so it may not be exactly the same).
Choose Audio CD and set the gap if reqd.
Click burn, then insert the CD when prompted in the top of the iTunes window.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV.

I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.

Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

I have a 17" Mac Book Pro and a 13" Mac Book Pro...both use the same Apple ID. My wife uses the 13" and now wants to change the Apple ID on the 13" to her Apple ID. How do I do this and not loose the information on that computer?

Hello Teddy53149 and welcome to Apple Support Communities,
Follow this procedure:
Change your OS X account name and home directory name - Apple Support
As they recommend and as always when you're messing with administrator accounts back everything up first.

I am wanting in input audio to a MacBook Pro running 10.9.4. Since there is only the internal microphone as an input choice, how do I accomplish this?

Similar Messages

Maybe you are looking for