I Am Without Sound - Help

I have no sound coming from LOGIC. All I have is the sound card that comes in a PowerMac G5. Nothing fancy.
I checked "Core Audio" in the Audio Drivers pop-up. I then get this warning:
The previously selected audio interface is not available.
The built-in audio inputs and outputs of the computer will be used instead for this session.
I then get sound. But this warning pops up all the time. If I uncheck "Core Audio" - NO SOUND.

You can reduce it now that it is working. If you're OK using 512 that's fine, I usually run at 128. Smaller buffers settings allow quicker response and throughput-but that has disadvantages such as CPU hungry plugs will start to crackle because they don't have enought ime to be processed. I'd go to 128 and adjust to taste. Softsynths for example will come through 4x faster. It shouldn't affect the sound as long as everything has enough time to process.
J

Similar Messages

Converting your MUSIC to a RINGTONE 'without GOOGLE help'

Took me a while to work this out and after much hair pulling and ‘without’ the help of Google or a 3rd party program see below.
Good luck:-
• Open I Tunes
• Find the song you want as a ringtone
• Double Click the song to play it and make a note of the start time where you want the ringtone to start. The counter is shown at the top of I Tunes in the centre just to the left.
• Stop the song
• Right click on the song and click ‘Get Info’
• Click on ‘Options’ Tab
• In the drop down, put the start time in the ‘Start Time’ box
• Put the stop time in the ‘Stop Time’ box. Stop time must be no more than 30 seconds after the start time otherwise ITunes will not see it. i.e. start 0:10 stop 0:40, start 0:12 stop 0:42 and so on
• Click ‘Ok’
• Right click on the song again
• Left Click on ‘Create AAC Version’ this will create a second version with a time of only 30 seconds.
• On the original song you first clicked right click on the song and click ‘Get Info’
• Click on ‘Options’ Tab
• Remove the tick from the ‘Start Time’/Stop Time box.
• Click ok. This is important as if you don’t every time you play that song it will only play the 30 seconds you have chosen. Sort of resets the counter and tidy ups I Tunes.
• Now on the song that was created (the 30 second time song) right click on it and click ‘show in windows explorer’
• This will open the location in windows explorer where the track is stored and highlight it for you. (leave it ITunes open)
• The song should say its name then just after it in the same box .m4a
• If there is no .m4a on the end of the song name, no problem. At the top of the windows explorer windows box where it says file, edit, view, favourites etc click ‘Tools’. A list will drop down then click ‘Folder Options’ This will open a window. Click the ‘View’ Tab. This will show a load of boxes with ticks in. Un-tick the box that says ’Hide Extensions For Known File Types’. Click ‘Apply’ then ‘Ok’ you should now see the .m4a at the end of the song name.
If you have any issues doing the above, i.e. if you have Windows Vista I downloaded a foc for 45 days program that edits file types.
• Right click on the song then change the .m4a to an .m4r. i.e. just change the a to an r This will change the file ‘Type’ from ‘m4a File’ to ‘Ringtone’
• Leave the windows explorer window open.
• Go back into I tunes and close it.
• In the windows explorer window that was left open double click the ringtone you created. This should now open I Tunes and start playing the song. Be patient as sometimes it takes a minute or so.
• In the list on the left in I Tunes will be a file called ‘Ringtones’ with a bell to the left of it. Click this file. This will open the ringtones file. In there will be the ring tone you created.
• Now in the list on the left in I Tunes click ‘Music’ then find the original song you copied originally in the list. You will find that there are two. One of full song length and the other of 30 second length. The 30 second one will have right on the left a ! Symbol. It you double click on the song it will say it can’t find it. DO NOT click locate. Click cancel otherwise it will go off and hunt for it.
• Right click on the song with the ! Symbol by it then click delete. This will delete it. Don’t worry this is just to tidy up your I Tunes and will not delete the song as its only a path to the song that is no longer there. The song is now a ringtone and found through the ringtones file.
• Now last but not least plug in your phone and sync it. Once done the ringtone will appear in the ‘settings’, ‘sounds’, ‘ringtone’ section.

What's the difference between looking up instructions on Google or looking them up here, or anywhere else?
Why does it matter where the instructions come from?

Have downloaded this week's episode of Covert Affairs and it plays without sound. Any way to fix this? Any way to redownload this episode?

I have downloaded the latest episode of Covert Affairs and it plays without sound.
This is correct for a playbeack on a Mac Mini, on a MacBook and on ATV.
Thinking of redownloading this episode but would that help?

How to report an issue with Your iTunes Store purchase

Premiere CS5 import avi clips without sound. How can I import avi clips with sound without convert?

Dear Adobe Forum,
I have the following problem, please help:
I would like to import avi clips in adobe premiere. All clips have the same avi codec. But unfortunately my adobe premiere does not import the sound of a few
avi clips. It is wired because about 10 out 70 avi clips which have all the same avi codec does not work with sound in premiere CS5. In the timline premiere import the video and audio line but there are no audio waves in the about 10 avi clips. additonally premiere plays the 10 avi clips in the source monitor without sound. Furthermore when I open the 10 avi files without adobe premiere they have sound, but with premiere there are no sound in the 10 avi clips.
What can I do, so that I can import all avi files with sound. I do not want to convert each of the avi files because then they have not a good quality and it is to complicated and it takes to much time to convert all files in this video project and in the other video project in my future.
Consequently How can I import all avi files so that they have immediately sound? Do I have to change some premiere settings?
Thank you in advance
Leonardo

Now I show you details of 2 files:
the first video clip which you can import with sound (works):
Video:
1280 x 720
data rate: 4259 kBit/s
total bitrate: 4387 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 63.5 MiB
Duration                         : 2mn 1s
Overall bit rate                 : 4 388 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 1s
Bit rate mode                    : Variable
Bit rate                         : 4 248 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 61.4 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 1s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 1.85 MiB (3%)
Alignment                        : Aligned on interleaves
Interleave, duration             : 21 ms (0.64 video frame)
the second video clip which you can import without sound (doesn't work with sound):
Video:
1280 x 720
data rate: 4278 kBit/s
total bitrate: 4406 kBit / s
Single bit rate: 29 single images / second
Format                           : AVI
Format/Info                      : Audio Video Interleave
File size                        : 69.3 MiB
Duration                         : 2mn 11s
Overall bit rate                 : 4 407 Kbps
ID                               : 0
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=3, N=15
Codec ID                         : H264
Duration                         : 2mn 11s
Bit rate mode                    : Variable
Bit rate                         : 4 267 Kbps
Maximum bit rate                 : 4 001 Kbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate                       : 29.970 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.154
Stream size                      : 67.1 MiB (97%)
Audio:
Bitrate: 128 kBit/s
Channels: 2 (stereo)
sampling rate: 48 kHz
ID                               : 1
Format                           : AAC
Format/Info                      : Advanced Audio Codec
Format version                   : Version 4
Format profile                   : LC
Format settings, SBR             : No
Codec ID                         : FF
Duration                         : 2mn 11s
Bit rate                         : 128 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Stream size                      : 2.01 MiB (3%)
Alignment                        : Split accross interleaves
Interleave, duration             : 21 ms (0.64 video frame)
Consequently, as you can see, they have both nearly the same information
Both video clips have the following audio codec:
AAC
In the folder where all raw video clips exist there are a few new files with the codec ending: .AVD ("the name of the file".AVD)
But the 2 video clips mentioned above does not have any files like .AVD oder something else like that. But the first one works and the second one doesnt work.

After Effects composition is imported into AP without sound

Hi, everyone
I've got a really frustrating problem with AE and AP CS4. Today AE has decided it will no longer render my composition that I spent days building. It's really nothing fancy, but it has lots of .MTS files, as well as some .mp3 ones, and I have just come across a post today saying that I should have converted the .mts before bringing them into AE. The thing is, although it sometimes complained when I was doing some test renders, it would nonetheless give me some stuff. Well, not today - it crashes from the first frames of the comp.
After pulling my hair out, I was hoping I could import the comp into AP and render from there. Up to a point, this works, because it does render and there are no more errors about "after effects error: error (4) reading frame from file (86 :: 2)".
However, my comp does not have any sound... is that meant to be or can Premiere be persuaded to import the sound, too?
Thank you so much for your help in advance because I am literally pulling my hair out...

Thanks for this, Todd. I will give the updates a go (EDIT: it turns out I had all the updates...). I will also convert the .mts and keep my fingers crossed that replacing the .mts with the new files is as easy as you suggest.
Still wondering a bit why Premiere would import an AE comp without sound, though... That is seriously odd in my books...
Thanks for the suggestions anyway - at least now I have something to try.

My recorded footage without sound will not play, but will when recorded with sound, any ideas?

Hi there community!
I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
Some of the footage is recorded with sound, and plays fine. However, with most of the footage, i chose to turn the recording of sound off. These files without sound will not play in any player, even when Perian is installed.
These are the specs of the video I have been able to find out.
File type: .AVI
Video Stream: JPEG
This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file. VLC player says it can not play the video or audio format 'undf', whatever that means. Another player says it needs a .moov encoder, but I do not see how this is possible. I have also tried attaching audio to it via Logic 9 with no success.
I am at a loss, and I really need this footage for a project. Any ideas?
Thanks for any help!!

It won't let me post the video in the forum, so here is a link to it in dropbox.
https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov

Why when i download one video this caming without sound

Wye when ai dawnload a video, this caming without sound.

We'll help figure this out, taney! What type of device are you downloading to? Have you tried downloading to a different device? Have you ever been able to download before and gotten the sound? Please provide some additional details, and we will work to resolve this matter.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Recording without sound

I am trying to record a video without sound with my iphone 5. I recently downloaded camera plus pro, hoping that it has that feature, but couldnt find it.Can you help me find it or can you let me know if there is another option. Don't want to buy another app though.

Hey,
Camera Plus Pro saves all photos and videos to Quick Roll library, within the app.
Hence, to transfer these photos and videos you will have to initially copy them to iPhone's Camera Roll library.
Follow the steps below to transfer photos to your Mac:
1. Launch Camera Plus Pro app and go to Quick Roll library.
2. Here tap on Sync All button in the bottom bar to copy all items to iPhone's Camera Roll. (See screenshot below)
3. Once done, you can connect your iPhone to Mac and transfer required photos and videos.
4. On your Mac, import the photos using iPhoto or Image Capture app.
Alternatively, you can also use Wi-Fi/FTP transfer method for wirelessly transferring photos to your Mac.
To know about this, download the User Manual for CP Pro here. <http://www.globaldelight.com/iPhone/camerapluspro/cppmanual.zip>
Hope it helps.

Openshot and kdenlive render without sound

Hi
It has been a long time [a few months] since I have not used Kdenlive.
When I rendered a movie with a mp3 sound track [ songs especially ] I got the film with this sound track.
Now are occuring 2 things:
The final movie is without sound [during the edit, there is no problem, I can hear the track, move it where I want, putting effects on it without any problem],
the time counter is wrong, it does not show the video time correctly, I mean the time counter will be stuck at 0 second, then will jump to 6 seconds and son on for example.
These things happened in OpenShot too, actually I tried OpenShot editing my new clip and I found these issues. I thought it was specific to OpenShot and I remade my clip with Kdenlive.
Any clue?
Thx in advance
Serge

Start reading here and follow all included links and answer all 16 questions at the end of the Wiki article: Some suggestions

New Problem - video loads, plays a bit, pauses, then plays without sound.

On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?

This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

Airplay plays – without sound

I am not sure if it is a iTunes, AppleTv, Airplay or Time Capsule issue – or a combination of them all.
But i am experiencing alittle annoying issue, which i hope to fix.
I am playing music from iTunes 11.0.5 and i Airplay it to my AppleTv it plays with sounds and all as it sould. But often we it continues to the next track, I can see it plays because the playcounter is running and it Scrobbles to Last.fm – but there is no sound. I then have to pause and press play, or skip back to beginning of the track. Otherwise it can continue to play the rest of the album, just without sound.
I think it might have something to do with all the media files are stored on my Time Capsule, but the iTunes folder containing the .itdb and .itl are still on my local HD. It is as if it doesn't load the files properly. But i don't have any issues with movies files.
Is it a iTunes Time Capsule issue? And if so, any fixes? I tried updating to latest firmware, but it didn't resolve the issue.
Or could the problem be soemthing else?
I do have a pretty fast internet connection both in upload and download.
MacBook Pro 10.8.4
iTunes 11.0.5
AppleTv 2.gen (lastest OS)
Time Capsule 4. gen. (7.6.4)

Try using this application to convert the videos, or the instructions in this article.
(15110)

¡URGENT! Creative i-trigue 2.1 3300 NO SOUND ¡HELP PLEASE!

Hello! First, sorry for my english. It's not my language.I buyed i-trigue 3300 2 years and 3 months ago. This week, i have not sound: i check my computer and all connectors, i connect them to an mp3 player and i continuous without sound. The blue light it'ss on, 220v are ok, i connect headphones to my computer and i can listen music. Can i check something more?

jmg,
Since you have already tested the sound card with the headphone and it's fine then most likely the speaker is the issues. Just another small test, have you try testing the speaker on another audio sources such as MP3 player or computer. If it does exhibit the same then your best option is to contact support to arrange for a repair for the speaker.
Jason

Videos exported to MP4 or .3GP without sound.

Good morning.
I have a MacBook Pro with Leopard 10.5.5 installed and the QuickTime Pro with codecs Perian. I could always open FLV and export them to .3GP or .MP4 but from a few days ago the videos are exported without sound. However, when exporting to other formats such as iPhone or the AppleTV videos are displayed without problems.
Why before exported without problems?
Can be due to the last update of QuickTime?
Thanks.
PD.:Sorry for my English.

I don't know , but an .swf will open in After Effects. If you create a new composition with the .swf you can export it to any file type that you'd like.

Air ios stagewebview youtube video without sound

I developed an app for IOS with flash air 15.0
I used StageWebView to play youtube video in my app. On some ipad I have video +sound and on other only video without sound.
Is someone have a track for a solution?
You can find my app on the apple store or play store , find :
"fare, le mond de la propreté"
Best regards
Jean Luc

I installed KDEmod-minimal and solved the problem of sound. I believe that when I installed and kdebase-workspace kdebase-konsole, was missing a package but do not know yet what package.
Thank you!

I Am Without Sound - Help

Similar Messages

Maybe you are looking for