I am wondering about transferring my pc date to my new iMac. I know there is a migration assistant, but I have multiple drives in my pc. Will the migration assistant be able to handle this?

Question

I know there is a migration assistant, but I have multiple drives in my pc.  Will the migration assistant be able to handle this?  I'm going to be trying to move the date to a new imac 27' with fusion drive.

Answer 1

the following set of instructions is a little longer, so you might want to print it out and have it handy
Step 1 - PC
If your PC already is connected to the Internet, hold down the Windows button on
your keyboard and simultanously press R. Into the opening window enter "cmd" (without
the quotation marks). A command line will open, enter "ipconfig" (again without the
quotation marks) at the prompt. Now find the section labelled "Ethernet-Adaptor" and
note the values for IP-Address, Subnet-Mask and Default-Gateway on a sheet of paper
If your PC is not already connected to the internet, you need to manually configure its IP address.
open Network and Sharing Center
do a right click on Ethernet and select Properties
in middle of the screen there is a box labelled "This connection uses the following items"
out of this box select "Internet Protocol Version 4 (TCP/IPv4)"
click on the Properties button in the right corner
Into the window "Use the following IP address" enter the following values
IP-Address: 192.168.0.1
Subnet-Mask: 255.255.255.0
Default-Gateway is the IP-Address of your Router. This value is needed for internet connection, for the file sharing setup only this value can be left empty.
Step 2 - Mac
If your Mac already is connected to the internet, it is likely that it has automatically receive the necessary parameters from your router and therefore should be in the same network as your PC. To be on the safe side, you can check this by
open System Preferences
select Network
choose Ethernet from the panel on the left side of the window
click on Advanced
click on TCP/IP
compare the values for IP-Address, Subnet-Mask and Default-Gateway with those you wrote down earlier.
If both PC and Mac have identical numbers in the first three parts of the IP-Address, you are set.
If your Mac is not already connected to the internet, you need to manually configure its IP-Address as well.
In the TCP/IP window you have just opened select "Manually" from the drop down menu "Configure IPv4:"
Enter the following values
IP-Address: 192.168.0.2
Subnet-Mask: same as with PC
Default-Gateway: same as with PC
Step 3 - Activate File Sharing on PC
open Control Panel
select Network and Internet
select Network and Sharing Center
on the left panel select change advanced sharing settings
in the middle of the new page enable turn on file and printer sharing
Step 4 - Activate File Sharing on Mac
open System Preferences
select Sharing
set check mark next to File Sharing (green circle appears on the right side next to File Sharing:)
click on Options:
set check mark next to Share files and folders using SMB
in the listbox under the text Windows File Sharing make sure there is a check mark next to your account name
Step 5 - Create a share on your PC
In Explorer select the folder you wish to share
do a right click on that folder and select "Share with"
choose "Specific people"
a new window opens. there select your Windows username (usually the first in the list)
if you plan to copy from Windows to Mac only, it would be sufficient to grant Read permission only, but, since most likely you are the only person to access that share and certainly do not plan to sabotage yourself, Read & Write permission is ok too.
finally click on "Share"
Step 6 - Create a share on your Mac
Once the check mark next to your account name is set (see above) your home directory is automatically set as a share.
Step 7 - Connect your PC to your Mac-Share
do a right click on the network icon which resides on your desktop or in the left
panel of every Explorer window
Select Connect Share
in the text box next to Folder: enter \\<ip-address-of-your-mac>\<your-osx-username>
if you are using the same username and password on both Windows and OSX click on "Finish",
if not set the check mark next to "Connect using different credentials" afterwards click on "Finish" A new window will open where you enter username and password that you are using with OSX
Step 8 - Connect your Mac to your PC-Share
hold down the command key and press K simultanously or in Finder click on Go in the menu at the top of your screen and select "Connect to Server"
in the Window that opens enter smb://<your-windows-username>:<your-windows-password>@<ip-address-of-your-PC/<y our-windows-username>
or
smb://<ip-adress-of-your-PC/<your-windows-username> you will be asked to enter your Windows username and password in popup window
Now you have both computers connected to each other. Each will provide you access to your home directory of the other computer. Open a second Explorer or Finder window with your local home directory and start copying