I am wondering if the data from data speed test apps affects my overall usage from my plan

Yesterday as we were coming home on the highway, i decided to test the connection speed using an app from the google play store. I downloaded it because I had about 11MB or so used that day and decided to use my data. Once it finished downloading and installed I opened it and begun a test. It gave me a 15mb download and 2mb upload result so I did one more test. As I was doing the second test I get an alert about my data limit I set up for the day to pace out the 2GB I have for the month. I went to check my apps and saw I used about 40-50MB since using the data speed test app. Do these tests count against my actual plan?

Yes speed tests count against your cap if as Ann says you;re using them to test you mobile data. I think this where I see people complaining about their caps being exceeded but claim they don't do anything. People don't realize that speed tests are going to use 50 MB and even up to 80 MB of data. You do just 1 speed test in a day and you will use 1.5 GB to 2.5 GB a month. And some people feel the need to do 3, 5, 10 tests a day.

Similar Messages

I was wondering, once the 1gb free data is applied to the account, can you downgrade your plan? If so, how low can you drop the data before the promo is affected?

I was wondering, once the 1gb free data is applied to the account, can you downgrade your plan? If so, how low can you drop the data before the promo is affected?

I beleive you have to keep your PAID data of at least 1gb

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.

Data transfer en speed test

Dear all,
We are currently examining the location of a new server for BI. In order to do so, we want to know how much data is currently transferred from R/3 to BW, and also how much data is transferred when calling up a query.
We want both Europe and America to be able to have a good performance when reporting, and in the off-hours when transferring data from R/3 to BI.
Does anyone know if there are any tools in SAP to see how much data is transferred and how look in took, for front-end as well as back-end.
Best regards,
Almar van Pel

Hi,
You are suggesting that by doing the following formula:
Message RSM2 852 (data save in PSA started)
minus
Message R3 402 Information has been derived from data extraction
gives me the exact time of data tranfer from system A(R/3) to system B(BI).
I'm having serious doubts here, as I'm pretty sure there is overhead in the time calculation. (I don't want a $$ decision based on incorrect interpreted or incorrect infomation)
Though, I'm interested in the way you calculate the amount of data. In this case there are a lot of data transfers a day where the amount of records is much lower then the package, where I'm still not sure how to calculate the kb's from package size. How to calculate the size of these packages?
Regards,
Almar van Pel

How can I see the dates of all of my app downloads (free and paid) from the iPhone? If this is not possible, from the computer? Is there an apple website for this?

I would like to know how I can check the download dates of all of my iPhone 4 apps from the phone itself, the free apps downloaded too. Is there a website I could go to to see these?
If not, how can you see this on a PC?

View Purchase History
http://support.apple.com/kb/HT2727

What is the popular broadband speed test app for the iPad?

Realized that speedtest.net app that everyone uses for the iPhone doesn't offically have an app for the iPad (althought you can use the iPhone version on the pad, the resolution is not there.)
What is the popular app for the ipad?

Dayvidpriddy wrote:
How about you "get a life" loser, how often I use something isn't a concern of mine.
I guess most of your 4K posts are mostly bully posts...
Please read the ToU for the forum:
"You must be at least 13 years old to post to the Site. If you are over 13 years old but have not yet reached the age of majority, you must have your parent or guardian's permissions to post to the Site."

Is there a limit to the number of apps that can be Hidden from view in Family Sharing?

I've just set up a Family Share and have issued invitations to a couple of family members.
I'm trying to take full advantage of the "Hide" feature that's available in the Purchased list in the App Store app, mostly to hide really old apps that I haven't used since the beginning of time. These apps have been long gone from any of my iOS devices, and it has always bugged me that they still appeared in my Purchased list. It's pretty cool that Family Sharing allows people to hide some of their app purchases from others in the group, as this also allows folks to hide apps that they also don't want to see in our own lists.
The first couple of dozen apps that I decided to hide stayed hidden. However: now, no matter what I try, I can't hide any more apps. I swipe on an app to reveal the Hide button; tap the button; the app disappears from the list; I go to another screen in the app; I return to my Purchased list: and the most recent Hidden apps are still listed.
This is driving me nuts. I'm wondering if Apple has imposed a limit on the number of apps that anyone can hide; or if there's something I can do to force a hidden app to stay hidden.
Advice will be gratefully accepted.

Hi, Gail
> I would suggest that you wait until tomorrow and check those devices again. Remember,
> this information is being pushed to your device from the iTunes store based on the changes
> you were making.
Not a bad suggestion, but it does not explain why an app refuses to REMAIN hidden on my iPhone -- as I explained in my first post:
> I swipe on an app to reveal the Hide button; tap the button; the app disappears from the list;
> I go to another screen in the app; I return to my Purchased list: and the most recent Hidden
> apps are still listed.
Given the clunkiness and general unreliability of iCloud - which rarely "just works" - it doesn't surprise me that hiding an app on one device doesn't mean the same app will be hidden immediately on other devices logged into the same account. I've learned to be patient and wait hours for changes to anything synced via iCloud to be reflected on other devices in the sync loop. But again, this in now way explains why apps were not staying hidden on the device that was used to hide them.
I've finally managed to hide all the apps I wanted hidden, after many hours of waiting and multiple attempts at hiding. I am in no way confident that these apps are going to REMAIN hidden permanently, or until I choose to unhide some of them; only time will tell if iCloud decides to behave and accept my series of "Hide this app" commands to be honoured permanently!

Getting xml file from web for iPhone App

Im having an app get an xml file from the web and process it. Ive got the processing part down, ive even got the downloading part done. Problem is so far ive only downloaded a generic xml file hardcoded into the app. I need the user to input a value of the file to get. As a matter of fact, ive been thinking that i may even use the UniqueIdentifier for the iphone to make the file unique enough without the hassle of having to search thru user/pass combinations. So i have the webform to have users enter the values and then their iphones unique ID. But i need to have the user get the unique ID from their phone. Unfortunately ive been able to find this:
UIDevice *device = [UIDevice currentDevice];
NSString *uniqueIdentifier = [device uniqueIdentifier];
[device release];
NSLog(@"Device GUID:%@", uniqueIdentifier);
but this number does not show up on the iPhone UserInterface, so my user would have no way of knowing what his/her uniqueIdentifier is
So my question is 2-fold:
1. If UniqueIdentifier is the best way to go, how do i have my users visualize their UniqueIdentifier in order to give their xml file that name?
2. If the user/pass is the best way to go, id have to store user, pass and file name in a database online and have the user create an account which would generate a unique idFilename for him/her and that way fetch the file.

Hi Marcio -
I suspect I don't understand your requirements, so if my reply is irrelevant, please tell us a little more about what you're trying to do.
Marcio Valenzuela wrote:
1. If UniqueIdentifier is the best way to go, how do i have my users visualize their UniqueIdentifier in order to give their xml file that name?
I'm not sure what you mean by visualize. If you want the user to see the device id, why not populate a label or text field with it? Otherwise, why not just insert the id into the request yourself? E.g.:
UIDevice *device = [UIDevice currentDevice];
NSString *uniqueIdentifier = [device uniqueIdentifier];
// [device release]; <-- do not release object you don't own
NSLog(@"Device GUID:%@", uniqueIdentifier);
textField1.text = uniqueIdentifier; // if we think the user wants to see this
[self addIdToRequest:uniqueIdentifier]; // implementation is an exercise for the student
2. If the user/pass is the best way to go, id have to store user, pass and file name in a database online and have the user create an account which would generate a unique idFilename for him/her and that way fetch the file.
This is up to you. If the download isn't confidential info, it might be ok to rely on the device id. Otherwise you clearly put the owner's info at risk in case someone else operates the device.
Im having an app get an xml file from the web and process it.
I'm not sure why you included this info about the downloaded data format, and that's one reason I'm not sure I understand the problem. But I hope the above will help you see what needs to be clarified.
- Ray

Multiple projects and their promotion from Develop to Test to Production

A customer has an interConnect infrastructure running about 5 projects. Each project has a Development, a Test, an Acceptance and a Production environment.
This basically works, but is really cumbersome to maintain.
They want to reduce the number of Interconnect installations as much as possible to ease maintenance. The iConnect version is 10gR1.
As far as I can see there are two options:
1) Put all projects into a single repository. You'd end up with only 4 InterConnect environments (Development, Test, Acceptance and Production)
2) Put all hub schemas into a single DB
The first one is obviously our favourite, but can you promote a single project to a new environment (say, from Development to Test) without affecting the other projects in the same repository? How difficult (if possible) is this? What are the possibilities and risks?
What are the possibilities for option number 2?
I hope anybody can give me some advice.
Arjan

Its slightly confusing about having multiple projects, the reason being the way Interconnect works is that it has a single database repository and when you create a project it is just a view on that repository. Therefore a project and a repository are essentially one and the same.
Therefore it would imply that if you have 5 separate projects then you also have 5 separate repository instances.
In terms of your options:
1) is the general way that most projects work. Lets say you have DEV, SYS, UAT, PROD. Therefore you'd generally have a repository instance for each env, therefore 4 repository instances, HUBDEV - for DEV env, HUBSYS for SYS env etc... These repositories would usually be in separate Oracle Instances although they could be on the same servers. Therefore the Hub schema for all, would be the normal one installed by the product, OAIHUB904. Then you would also have a single project for each repository. This repository would hold all the metadata for all your interfaces that go though this HUB instance.
As interfaces move through the various phases then you migrate between the different repositories, to move stuff from DEV to SYS etc...
2) From my understanding, this is not much differnet to the above except you want to hold all the Hub schemas in a single database instance. This is possible by creating each schema with a differnet name, OAIHUB904DEV, OAIHUB904SYS etc... and you would need to change the necessary infrastructure ini files to use these new names. With this setup you would still have 1 project per repository but it would just point to the relevant schema.
Let me know if you have any more queries.
Regards
Stuart.

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

What deterimes the amount of data in a waveform from a TDS 1012 scope

Hello,
   What determines the amount of data that is in a waveform that comes out of a TDS 1012 scope? I am assuming that I will have to look at the driver vi to determine the commands sent to the scope to figure it out. I am in a situation that I need to have the y axis to have a high resolution, that results in very little data being collected from the scope.
Regards,
Kaspar
Regards,
Kaspar

Hello,
    The amount of data that comes out of the TDS 1012 scope is determined by the data start (DATaTARt)  and data stop (DATaTOP)  commands that are defined on page 58 (2-38) in the 346 page programming manual for the scope. I found of that the data start was not set to 1, which is the beginning of the data.
    I also had a very low level signal on channel that was all most unreadable by the scope that caused me to think that I was not getting all of the data.
Regards,
Kaspar
Regards,
Kaspar

Unable to access the data from Data Management Gateway: Query timeout expired

Hi,
Since 2-3 days the data refresh is failing on our PowerBI site. I checked below:
1. The gateway is in running status.
2. Data source is also in ready status and test connection worked fine too.
3. Below is the error in System Health -
Failed to refresh the data source. An internal service error has occurred. Retry the operation at a later time. If the problem persists, contact Microsoft support for further assistance.
Error code: 4025
4. Below is the error in Event Viewer.
Unable to access the data from Data Management Gateway: Query timeout expired. Please check 1) whether the data source is available 2) whether the gateway on-premises service is running using Windows Event Logs.
5. This is the correlational id for latest refresh failure
is
f9030dd8-af4c-4225-8674-50ce85a770d0
6.
Refresh History error is –
Errors in the high-level relational engine. The following exception occurred while the managed IDataReader interface was being used: The operation has timed out. Errors in the high-level relational engine. The following exception occurred while the
managed IDataReader interface was being used: Query timeout expired.
Any idea what could have went wrong suddenly, everything was working fine from last 1 month.
Thanks,
Richa

Never mind, figured out there was a lock on SQL table which caused all the problems. Once I released the lock it PowerPivot refresh started working fine.
Thanks.

How do i change the path of data ajax false from returning to homepage, when using a PHP mail form in jquery mobile?

I have a put a php mail form in the quote page of my mobile site. However when i send the form it returns to the route page rather than the quote page, i have used the data ajax false action as i dont want to send via ajax. i have left the thanks page blank as i want it to remain on the same page showing sent or declined message. Can someone help please?
<?php
// OPTIONS - PLEASE CONFIGURE THESE BEFORE USE!
$yourEmail = "[email protected]"; // the email address you wish to receive these mails through
$yourWebsite = "www.firstcalltransport.co.uk"; // the name of your website
$thanksPage = ''; // URL to 'thanks for sending mail' page; leave empty to keep message on the same page
$maxPoints = 4; // max points a person can hit before it refuses to submit - recommend 4
$requiredFields = "name,email,collection,delivery,comments"; // names of the fields you'd like to be required as a minimum, separate each field with a comma
// DO NOT EDIT BELOW HERE
$error_msg = array();
$result = null;
$requiredFields = explode(",", $requiredFields);
function clean($data) {
$data = trim(stripslashes(strip_tags($data)));
return $data;
function isBot() {
$bots = array("Indy", "Blaiz", "Java", "libwww-perl", "Python", "OutfoxBot", "User-Agent", "PycURL", "AlphaServer", "T8Abot", "Syntryx", "WinHttp", "WebBandit", "nicebot", "Teoma", "alexa", "froogle", "inktomi", "looksmart", "URL_Spider_SQL", "Firefly", "NationalDirectory", "Ask Jeeves", "TECNOSEEK", "InfoSeek", "WebFindBot", "girafabot", "crawler", "www.galaxy.com", "Googlebot", "Scooter", "Slurp", "appie", "FAST", "WebBug", "Spade", "ZyBorg", "rabaz");
foreach ($bots as $bot)
if (stripos($_SERVER['HTTP_USER_AGENT'], $bot) !== false)
return true;
if (empty($_SERVER['HTTP_USER_AGENT']) || $_SERVER['HTTP_USER_AGENT'] == " ")
return true;
return false;
if ($_SERVER['REQUEST_METHOD'] == "POST") {
if (isBot() !== false)
$error_msg[] = "No bots please! UA reported as: ".$_SERVER['HTTP_USER_AGENT'];
// lets check a few things - not enough to trigger an error on their own, but worth assigning a spam score..
// score quickly adds up therefore allowing genuine users with 'accidental' score through but cutting out real spam
$points = (int)0;
foreach ($badwords as $word)
if (
strpos(strtolower($_POST['comments']), $word) !== false ||
strpos(strtolower($_POST['name']), $word) !== false
$points += 2;
if (strpos($_POST['comments'], "http://") !== false || strpos($_POST['comments'], "www.") !== false)
$points += 2;
if (isset($_POST['nojs']))
$points += 1;
if (preg_match("/(<.*>)/i", $_POST['comments']))
$points += 2;
if (strlen($_POST['name']) < 3)
$points += 1;
if (strlen($_POST['comments']) < 15 || strlen($_POST['comments'] > 1500))
$points += 2;
if (preg_match("/[bcdfghjklmnpqrstvwxyz]{7,}/i", $_POST['comments']))
$points += 1;
// end score assignments
foreach($requiredFields as $field) {
trim($_POST[$field]);
if (!isset($_POST[$field]) || empty($_POST[$field]) && array_pop($error_msg) != "Please fill in all the required fields and submit again.\r\n")
$error_msg[] = "Please fill in all the required fields and submit again.";
if (!empty($_POST['name']) && !preg_match("/^[a-zA-Z-'\s]*$/", stripslashes($_POST['name'])))
$error_msg[] = "The name field must not contain special characters.\r\n";
if (!empty($_POST['email']) && !preg_match('/^([a-z0-9])(([-a-z0-9._])*([a-z0-9]))*\@([a-z0-9])(([a-z0-9-])*([a-z0-9]))+ ' . '(\.([a-z0-9])([-a-z0-9_-])?([a-z0-9])+)+$/i', strtolower($_POST['email'])))
$error_msg[] = "That is not a valid e-mail address.\r\n";
if (!empty($_POST['url']) && !preg_match('/^(http|https):\/\/(([A-Z0-9][A-Z0-9_-]*)(\.[A-Z0-9][A-Z0-9_-]*)+)(:(\d+))?\ /?/i', $_POST['url']))
$error_msg[] = "Invalid website url.\r\n";
if ($error_msg == NULL && $points <= $maxPoints) {
$subject = "Automatic Form Email";
$message = "You received this e-mail message through your website: \n\n";
foreach ($_POST as $key => $val) {
if (is_array($val)) {
foreach ($val as $subval) {
$message .= ucwords($key) . ": " . clean($subval) . "\r\n";
} else {
$message .= ucwords($key) . ": " . clean($val) . "\r\n";
$message .= "\r\n";
$message .= 'IP: '.$_SERVER['REMOTE_ADDR']."\r\n";
$message .= 'Browser: '.$_SERVER['HTTP_USER_AGENT']."\r\n";
$message .= 'Points: '.$points;
if (strstr($_SERVER['SERVER_SOFTWARE'], "Win")) {
$headers   = "From: $yourEmail\r\n";
} else {
$headers   = "From: $yourWebsite <$yourEmail>\r\n";
$headers .= "Reply-To: {$_POST['email']}\r\n";
if (mail($yourEmail,$subject,$message,$headers)) {
if (!empty($thanksPage)) {
header("Location: $thanksPage");
exit;
} else {
$result = 'Your mail was successfully sent.';
$disable = true;
} else {
$error_msg[] = 'Your mail could not be sent this time. ['.$points.']';
} else {
if (empty($error_msg))
$error_msg[] = 'Your mail looks too much like spam, and could not be sent this time. ['.$points.']';
function get_data($var) {
if (isset($_POST[$var]))
echo htmlspecialchars($_POST[$var]);
?>
<!DOCTYPE HTML>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="CSS/stylesheetnew.css" rel="stylesheet" type="text/css">
<link href="../jquery-mobile/jquery.mobile-1.0a3.min.css" rel="stylesheet" type="text/css">
<script src="../jquery-mobile/jquery-1.5.min.js" type="text/javascript"></script>
<script src="../jquery-mobile/jquery.mobile-1.0a3.min.js" type="text/javascript"></script>
<style type="text/css">
p.error, p.success {
font-weight: bold;
padding: 10px;
border: 1px solid;
p.error {
background: #ffc0c0;
color: #F00;
p.success {
background: #b3ff69;
color: #4fa000;
</style>
</head>
<body>
<div data-role="page" id="home">
<div data-role="header" data-position="fixed">
   <h1>FIRSTCALL TRANSPORT</h1>
</div>
    <div data-role="navbar" data-position="fixed">
                                <ul>
                                  <li><a href="#about">About</a></li>
                                  <li><a href="#services">Services</a></li>
                                  <li><a href="#contact">Contact</a></li>
                                  <li><a href="#quote">Quote</a></li>
                                </ul>
</div>
<div data-role="content"> </div>
     <div data-role="footer" data-position="fixed" > </div>
</div>
</div>
<div data-role="page" id="quote">
<div data-role="header" data-position="fixed">
    <h1>GET A QUOTE</h1>
</div>
<div data-role="content">
   <?php
if (!empty($error_msg)) {
echo '<p class="error">ERROR: '. implode("<br />", $error_msg) . "</p>";
if ($result != NULL) {
echo '<p class="success">'. $result . "</p>";
?>
<form action="<?php echo basename(__FILE__); ?>" method="post" data-ajax="false" >
<noscript>
<p><input type="hidden" name="nojs" id="nojs" /></p>
</noscript>
<p>
<label for="name">Name: *</label>
<input type="text" name="name" id="name" value="<?php get_data("name"); ?>" /><br />
<label for="email">E-mail: *</label>
<input type="text" name="email" id="email" value="<?php get_data("email"); ?>" /><br />
        <label for="company">Company:</label>
<input type="text" name="company" id="company" value="<?php get_data("company"); ?>" /><br />
<label for="collection">Collection: *</label>
<input type="text" name="collection" id="collection" value="<?php get_data("collection"); ?>" /><br />
    <label for="delivery">Delivery: *</label>
<input type="text" name="delivery" id="delivery" value="<?php get_data("delivery"); ?>" /><br />
<label for="comments">Message: *</label>
<textarea name="comments" id="comments" rows="5" cols="20"><?php get_data("comments"); ?></textarea><br />
<input type="submit" name="submit" id="submit" value="Send" <?php if (isset($disable) && $disable === true) echo ' disabled="disabled"'; ?> />
</p>
</form> </div>
     <div data-role="footer" > </div>
</div>
</div>
</body>
</html>

My wife has left me for four weeks, favouring to be with our son who lives 4,000 km away. I now have to cook for myself and the steaks taste horrible. What am I doing wrong?
If you do not know what I have (not) done to make the steak taste horrible, my question is as hard to answer as your question above.
Please give us more info like giving us the code that sends the page to the homepage rather than to the previous page.

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

*Journal Entries while uploading the vendor master data from legacy system*

hi SAP Folks,
can any one of you tell me the journal entries while uploading the vendor master data from legacy system to SAP system.
Eg: legacy system is having 10000 vendors list, 1 reconciliation account and $ 1000000. while uploading all these data from legacy system to SAP what are the journal entries we get.
thanks in advance.
Edited by: ravindranath manikonda on Nov 24, 2008 1:12 PM

Hi
you will be having only one entry logically
i.e. Opening Bal. clrng A/c Dr.
To Vendor A/c Cr.
regards

I am wondering if the data from data speed test apps affects my overall usage from my plan

Similar Messages

Maybe you are looking for