I am wondering if the I pad is like a I pod touch?

yes my daughter is really wanting a I Pad2 and I tild her to wait they might becoming out with the I Pad 3? Anyway is the I Pad kind of like a I Pod touch? I know that you can play games and do music and internet everything am I right? Thanks. I am a new user with all of this the kids are so much smarter then me on this technology

They are very similar. In many ways, an iPad is just a touch with more real estate. They share many of the same apps (differences being that iPhone/Touch apps do work on an iPad, but they are 'tiny' in that they only take up the middle of the screen. they will expand to fit the whole screen but sometimes look blocky because they're a lower resolution than the iPad screen.  Many iPad apps are formatted solely for the larger screen and don't transition down so you have more iPad that don't work on the Touch than vice versa)
I would say a general pros and cons
Touch
Pros
cheaper, more portable, easier for a kid's fingers, maybe more sturdy in that it's a smaller screen
Cons
smaller screen, easier to lose or leave sitting
iPad
Pros
larger screen, many HD apps including educational ones, even bigger it's still very portable
Cons
That larger screen is vulnerable and if hte glass breaks it's around 300 or more to repair (price dpends on the model), it's a highly coveted device so a thief magnet
As a parent you may also wish to consider that there's not a lot of parental control stuff....there's not 'net nanny' programs if you wish to monitor or control their online activities (this applies to both devices)
But, in essence, an iPad is a larger version of a Touch, with a few more bells and whistles.

Similar Messages

  • Why the Wi-Fi signal on my i-Pod Touch 2nd generation fluctuates? I have uopaded it to the newest version of OS for that particular model and the signal meter shows fluctuation all the way down to one dot. With the older OS (2.2.1) I didn't have any issue

    I have replaced my router from Verizon "Westel 8500" to Apple Air Extreme. Also changed my network provider from Frontier DSL to Comcast (TV Cable) and the issue with fluctuation seams to get a little worst than before. Currently I'm running the newest OS allowed for that particular model. With the older version (2.2.1) I did not have any Wi- Fi fluctuation. My connection is not dropping just the signal, according to the Wi-Fi meter is getting weaker. Please help.

    Could you post the output of these commands here?
    Step 1:
    Command 1: ( In Terminal)
    '/System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport --scan'
    Paste the results here.
    Step 2:
    Now Open console->system.log. Clear the display and Insert Marker.
    Command 2: ( In Terminal)
    'sudo /usr/libexec/airportd -d '
    Now reproduce the wireless issue you see and monitor the system log in Console.
    Wait for a few minutes so you see this issue happening.
    Then, Turn AirPort off and on a couple times to see if this issue still happens.
    Copy paste the system.log here.
    Step 3:
    Next, when you see this issue happening, hold the option key down and click on the AirPort menu icon and get the RSSI and Transmit rate details and post them here.
    Misc things to check:
    Make sure your AP settings are good. Stick to standard 11g/11a modes and disable any enhanced modes if your Access Point supports it.
    Real Player check- Do you by any chance have Real Player running ? It installs a Download Agent in your Login Items and that is known to create havoc. Try uninstalling this app. if you have it. Also make sure there is no instance of Real Player here -- System Prefereces-Accounts- Login Items.

  • Can the i-Pad play on an NTSC or PAL TV like the i-Pod?

    The i-Pod has a setting for TV signal out either NTSC (US) or PAL (rest ot the world).  I am wondering if the i-Pad has the same capability.  If so I have not yet found it.

    Yes. You can use the Apple Apple Composite AV Cable or the Apple Digital AV Adapter with an HDMI cable to TVs that support HDMI.

  • Satelite P500-12F will not load the track pad drivers!

    Hi, I just got a driver DVD for this lappy and its a self intall of all drivers that are missing or need updating, when ran I was told the track pad driver was missing and started to load it but it won't I tried a force load but hat also failed, the track pad has not worked since getting this second hand could the track pad be disconnected from the main board?
    Would this make the driver fail to load please?
    Any help would be truly appreciated.
    Many thanks, Wayne..

    Hi, When I bought this second hand the guy removed the hard drive for data protection and put in a new drive so no Toshiba software on ths one, the dvd was bought from ebay and is a driver dvd from USA no operating system it just self installs the drivers after windows has been installed, as in OP the track pad was not working and I thought it may be just the driver fault but it will not load it even with a forced install so I am just wondering if the track pad is actually connected, when the disk is inserted it searches for missing drivers and looks for updated drivers on the disk and it says then it is missing this driver but will just not install it, very confusing indeed.
    Regards, Wayne..

  • None of the software getting downloaded in my I pod 4g

    None of the software getting downloaded on my i pod touch. It asks for Apple user I.D. & Password whn entered it gives a error.
    This Apple ID has not yet been used before in the iTunes Store.
    How can i get this issue solve ?

    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I have the I-pad 1 and was wondering if it is possible to get the 5.0 update. Many aps now require it. Thanks

    I have the I-pad 1and was wondering if it is possible to get the 5.0 update. Many aps now require it. Thanks

    Yes - via iTunes on your computer.
    Connect the iPad to your computer and launch iTunes. Click on your iPad name under devices. Click on the Summary Tab in the iTunes window on the right and then click on Check for Update.

  • My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.

    My Lumia Icon goes dark during calls and I cannot access the phone pad to unless I hit the power button.  Because of this it makes it tough to put my phone on speaker or type in my v-mail password.

    I've been trying to find a common denominator. It happens inconsistently. It never happened before the Denim update. When it does occur, the screen goes black immediately upon answering the call and doesn't come back until the call is ended by the calling party.
    I thought it might be the proximity sensor, but when it's working normally I can see the screen go dark when it's at my ear and comes back when I take it away (tried it multiple times). I had Gestures Beta installed. I wondered if that could have an affect so I uninstalled it, but that didn't make any difference. I'm still stumped by the inconsistency. I haven't reset my phone as I didn't really want to go through that...

  • Are the apps I have on my Iphone transferrable to the I-Pad?

    I was wondering if the apps I already have will be transferrable to the I-pad? Also..because of the difference in size of the screens on the I-phone and the I-pad..will the resolution of the apps I already have look and play alright on the I-pad?
    Unclereeky

    I was wondering if the apps I already have will be transferrable to the I-pad?
    Yes, you can use your iPhone apps on the iPad except for those that use features that don't exist in the iPad.
    Also..because of the difference in size of the screens on the I-phone and the I-pad..will the resolution of the apps I already have look and play alright on the I-pad?
    Some will, some won't. Without knowing the specific apps you have, it's impossible for anyone to say for sure. The worst case will be that you put the app on the iPad and it doesn't work well or look good in which case you just remove it and inquire of the developer whether they have or plan an iPad version.
    Regards.

  • I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as how to resolve this issue

    I bought an I pad 2 from us but I can not activate the Facetime in UAE(Dubai)as I can not see the country in the I pad's  drop list, anyone has an idea as to how to resolve this issue

    I'm not that familiar with how FaceTime works. I know how to set It up but I don't use it. I just know that you can't activate in the UAE. I believe that you can activate in any country that permits it's use. Whether you will need a new ID or not, I can't confirm.
    You can Google this and get all sorts of articles on workarounds. Apparently if you set up a VPN you can use it in the UAE. Here is one article that I found.
    http://talkfree7.blogspot.com/2010/09/how-to-facetime-voip-call-from-uae.html
    I Googled "workaround for FaceTime in UAE" to find this.

  • When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    When I access my google e-mail account on the I-pad my inbox has at least 6 e-mails with no sender and no subject (absent via I-phone, Mac or PC) I cannot delete them as they cannot be selected- how do I stop them and clear the ones there now?

    Try turning the account off and on : Settings > Mail, Contacts, Calendars , then tap the account on the right, slide Mail to 'off', exit settings and go back into the Mail app, and then go back to Settings and slide Mail back to 'on'
    If that doesn't work then try closing the Mail app completely : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    Also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

    I am going to buy myself a MacBook Pro in the near future and was wondering if the new Retina Display model would be worth the extra cash. I will mostly be doing photo/video/music editing.

    if you're not in a big rush - why not hold off until Adobe and Microsoft releases an update to support the Retina Screen.
    Don't get me wrong - the Macbook Retina is a good and videos look great - but when it comes to Photoshop, it's a little blurry and the fonts in Excel and Word is pretty blurry too.....I own one....
    In any event, if it's something you can live with - then by all means - go for it.....
    Otherwise - get the non Retina Macbook Pro - it's cheaper, and it's user upgradeable in both RAM and Hard Drive.
    Good luck.

  • I have pages version 2.1 for the i pad. When I try to open pages documents on my mac it says You need a newer version of Pages to open this document. I have updated to the very latest Pages for mac version 4.3. Cant figure it out.

    I have Pages version 2.1 for the i-pad. I have Pages on my Macbook, version 4.3. When I try to ipen a doc on my Mac it says I need a newer version to open this doc. There is no newer version. I need these docs in a bad way and cant get to them on the Mac. Any ideas?

    IOS Pages 2.0 and 2.1 implement an entirely incompatible document format with Pages ’09 v4.3. It cannot open them, and you are then prompted to update to Pages v5+ which is compatible with your IOS Pages.
    Unfortunately, updating to Pages v5+ is a bad thing, as it is a brand new application that has omitted over 90+ features from Pages ’09 v4.3. When you update to Pages v5+, it will move your old still functional version of the earlier Pages into /Applications/iWork. Aside from all the missing functionality, Pages v5+ will likely damage older documents that depend on specific Pages ’09 v4.3 features (including AppleScript and custom Templates).
    Oh, by the way, the older and new Pages documents have the same filename extension (.pages) making document organization difficult without applying different tag colors to old and new documents.
    We are recommending that users remain on their earlier Pages version. You may have to export documents from IOS Pages as Word .docx to avoid the OS X Pages update notice.

  • With snow leopard, basic keyboard functions like double clicking on a desktop item now require me to hold control and then click on the track pad.  I'm trying to recall, I seem to remember Leopard allowing you to double click items to open them?

    I notice in iPhoto that if I used to be able to single/double click on a photo to view it but now if I click CONTROL and then the TRACK PAD, the options don't allow me to open JUST that photo in nearly full page format.  Any suggestions?

    "nearly full page" means that I used to be able to double click on a photo in iPhoto, and it would open up to a full image within iPhoto itself.  Now, there is absolutely no option to enlarge a photo unless you go to slideshow - no option to double click or side click or Control+click or Command+click or anything at all.  The small white arrow at the bottom right corner of every photo gives you options, but none are options that include enlarging a photo to see it bigger.  And no, you cannot double click it at all to even open it up in any other app unless you click/drag onto desktop and then open in Photoshop, or equivalent app. Yes, checked TP preferences.  No, it doesn't help.

  • How can I display the dialed digits in the dial-pad window for Jabber 9.7.4

    Scenario: From his Jabber 9.7 phone-mode, the customer dials in to a auto-attendant and he cannot see the digits he is entering from the dial-pad icon, it displays **********
    Is there any config to allow the display of these digits dialed after the call is connected ?

    i solved this problem using this query
    SELECT STOCK_CODE, COUNTRY_ID,
    SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
    SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
    SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
    SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
    SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
    SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
    SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
    SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
    SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
    SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
    SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
    SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
    SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
    SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
    SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
    SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
    SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
    SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
    SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
    SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
    SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
    SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
    SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
    SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
    SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
    SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
    SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
    SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
    SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
    SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
    SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
    FROM HS_DAY_CLOSE
    GROUP BY STOCK_CODE,COUNTRY_ID

  • I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to

    I just bought a new MacBook Air. In my old one, I could go from screen to screen by using three fingers to swipe over the key pad. This one just sits there. It is Yosemite. How do I set up preferences so I can use three fingers to move from screen to screen?

    Those choices are controlled via System Preferences, Trackpad.

Maybe you are looking for