I am working at hotel havana and a guest is trying to connect to our network.  she is connected but when she uses her internet browser nothing pulls up

A guest of our is having trouble with her internet browser.  HSe is currently connected to our network and nothing is happening when she uses mozilla firefox. 

Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

Similar Messages

  • I am use iphone 3gs. I have use wifi internet that time it work ok, but when i use sim internet then my phone is shut off

    I am use iphone 3gs. I have use wifi internet that time it work ok, but when i use sim internet then my phone is shut off

    reset phone, reset network setting, get new sim, and restore as new

  • I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

    I created an apple id online and not on itunes, my email said the apple id was successfully created but when i used it in itunes it said "This apple idhas not been used in itunes please review your account information "

    Hi rixa03!
    I have a couple of troubleshooting steps for you to try to resolve this issue. First, you should try closing the app according to the instructions found on this website, which is a troubleshooting assistant for the iPad:
    Apple - Support - iPad - iPad Troubleshooting Assistant
    http://www.apple.com/support/ipad/assistant/ipad/#section_3
    If the issue persists, you may need to try resetting the iPad, the instructions for which can be found here:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • When I click on a link I get sent to a bunch of other sites and the problem doesn't occur when I use windows internet browser.

    When I click on a link, whether e-mail, yahoo or other search engines, E-bay, Amazon, etc. I get sent to another site. If I click back and then re-click on the original site I get sent to where I wanted to be. While I am browsing on a web page of any of the above, or other sites, I sometimes get a voice ad or possibly a video, but I can't locate it or turn it off. This does not happen when I use windows internet, or it's Google chrome internet, only with Firefox. I have used Ad aware, and Mal-bytes anti-virus but they come up blank.

    Do a malware check with some malware scanning programs on the Windows computer.<br />
    You need to scan with all programs because each program detects different malware.<br />
    Make sure that you update each program to get the latest version of their databases before doing a scan.
    *http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
    *http://www.superantispyware.com/ - SuperAntispyware
    *http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
    *http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
    *http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
    You can also do a check for a rootkit infection with TDSSKiller.
    *http://support.kaspersky.com/viruses/solutions?qid=208280684
    See also:
    *"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

  • I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

    I have installed airport express on my Window 7 and had problem to find the airport express.
    I solved the problem by turning off my AVG firewall and  the airport tool found the airport express and it went steady green.
    I then turned on the AVG firewall again and it continues ok.
    But when I turn off and restarted my laptop I have to follow the same procedure.
    The AVG firewall is set to All Allowed for the airport express.
    Is there anybody out there that can give assistance to solve this problem?

    Hi,
    I solved the problem myself by updating the Wi-fi driver.
    Now it works perfect.

  • HT1338 I'm trying to attach my MacBook Pro to an overhead projector and can't get it to work. If I go to System Prefs/Displays, I see the box on the screen.  But when I collapse the Prefs the desktop is not seen. Can you help?

    I'm trying to get an overhead projector to identify my macbookpro.  If I go to Prefs and select screens that dialogue box comes up on screen.  So I know there's nothing wrong with the VGA cable.  But when the screen box is collapsed nothing happens.  My computer is not recognized by the projector.  Can anyone help? 
    On a PC I used to hit "control F5.  But I don't believe that works on a MacBook. Any suggestions?

    About the only thing you can try is using the Online Internet Recovery system to reinstall Lion on your Mac over the top of the current install. that will reset all system files and should not touch your personal files or the apps you have installed.
    Or iof you have a recent Time Machine backup use that to restore your Mac to that point in time.

  • I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

    I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

    You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

  • We are using SAP SRM to punch out external catalogs. Firefox version 3.5 and below works fine and the items from the catalogs are brought back to SRM .But when we use version 3.6.12 the items are not getting transferred back to SRM from the Catalogs.

    SRM is a procurement system from SAP which we use to purchase goods and service. We have external catalogs like officemax, cdw etc which we punchout the items and bring it to SRM for ordering.
    When we use firefox version 3.5 and below the items which we add from the Catalogs are correctly brought back to SRM for us to order. But when we use versions 3.6.12 the items are not brought back to SRM.
    Internet Explorer 7 and 8 works fine. Is there anyway you can help us.
    Thanks
    Jayant

    Hi,
    Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version  for SAP solutions. Many of your problem will get resolved with it.
    Question 1:
    So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
    For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
    Generate EarlyWatch report for more detailed view
    Question 2:
    My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
    The libttsh11.so library cannot be found in the related directory.
    Cause
    The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
    Such a configuration will cause, installation, relinking and other unexpected problems.
    Solution
    Disable the CIO option on the filesystem.
    References
    NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
    Hope this helps.
    Regards,
    Deepak Kori

  • Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr. Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and theref

    Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
    Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.

    Hi Elba,
    Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
    I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
    I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
    The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
    If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
    Completely baffled by it. Any idea what could be the reason?
    Kind regards,
    Nik

  • I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

    i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
    thanks
    ravi
    <Email removed by Host>                                                                                                                                                                                                                                       

    sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
    All computers are personal computers, a PC though is also "non-Apple" in common usage.
    Mac also is platform and OS.
    Very confused reading what you are trying to tell us.

  • My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? We have an iMac 24" with the latest MAC OS.

    My wife has an NOKIA E71 and she syncs with iSync. Everything works well, but when she adds a meeting on her phone, it does appear on the computer after syncing. Anyone? 
    We have an iMac 24" with the latest MAC OS.

    Hello Kerrigaj,
    After a re-install of OS X 10.5.8 uninstalled the E71 in iSync and moved it out of the bluetooth-device list first and completely re-installed it using the bluetooth manager (SystemPreferences/Hardware).
    No extra thirdparty-software involved and ever since no problems.
    Goodluck - hope it works for you.
    (MDD 1Ghz DP/2Ghz/OS X 10.5.8 + E71)
    Message Edited by nicle on 28-Aug-2009 07:23 PM
    Message Edited by nicle on 28-Aug-2009 07:24 PM

  • Help... Have ate in living room & bedroom & I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good & charged but the download took over 24 hours & only in the bedroom.... Please he

    Help... Have ate in living room &amp; bedroom &amp; I could works fine on iPhone4 as well as ipad2 wifi. I have home sharing enabled on all but when I rented a movie it was all good &amp; charged but the download took over 24 hours &amp; only in the bedroom.... Please help

    The remote app can either automatically find libraries available on a network (with home sharing available) or if you haven't got home sharing enabled, you can manually pair an itunes library with the remote app (using a number that is generated by the app and then typed into the itunes library).
    That is why I am so confused, as it seems to be the home sharing that is the problem!

  • I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album.

    I have a problem with my 4s camera which has come up recently. Everytime I take a picture and look it up via the 'Photos' app, it shows as blank. But when I click on edit on the blank picture, it comes up and I am able to save it back on my photo album as a proper image. Besides, I have also experiences the camera working a bit wiered (slow and often blanks out the moment I am ready to take a photo). Any help on this pls?

    Hi Noob Søren
    There are a few things that are confusing in your question.
    As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
    You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
    I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
    You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
    Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
    If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
    Hope this helps
    WN

  • I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs

    I have an apple tv 3 but when i use Home Sharing from my Windows Laptop the Apple TV shows all my music on the TV but it will only play 1 or 2 songs and then stops!!! Annoying, so I have to re-start iTunes on my Laptop and it will play 1 or 2 more songs then stops again!!! still annoying.
    Can anyone assist me with this issue?
    Thanks

    To downgrade, you'll need to download the previous software version here: ATV3 http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw
    ATV2: http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
    Next, plug the Apple TV into your computer with a micro-usb cable (most phones today use these) and start up Itunes. It should detect the Apple TV in recovery.
    After that, hold down Option on Apple or Alt on Windows and click Restore. This should open a window that allows you to select the software update you want to apply. Select the one you downloaded earlier.
    It will then go through the restore process, which takes only a few minutes, and then you will be able to plug the Apple TV back in to your display and set it up again.
    I recently ran into a similar issue with a bunch of these things and after restoring them all to the previous software version they are working again.

  • TS2771 i am in ny and i get my favorite radio station in fl on my ipod touch, but when i plug in my ipod to the aux on my radio so i can hear the music ,i hear nothing at all

    i am in ny and i get my favorite radio station in fl on my ipod touch, but when i plug it into my aux on my radio so that i can hear it, theres no sound at all

    Do headphones work in your iPod touch? If they do that indicates there is a problem with the cable or the car's AUX input.

Maybe you are looking for

  • Exception while running webutil demo

    Hi, I am facing problem with a webutil unit. when I use client_tool_env.getvar function client_tool_env.getvar('NLS_LANG',:builtins.tool_env) +(under BUILTIT->NLSLANG (button) of webutil DEMO)+ I get this exception in the Java console and the webutil

  • Creation of a web service datasource in APO BW

    I am using APO V5, which includes BW V7. I need to create a 'web service' datasource in APO BW, so that I can receive XML data from XI to update the datasource. How can I create the 'web service' datasource?... should the 'logical system' be the conn

  • Songs deleted from iTunes are still on my Nano

    I've got my iTunes set for me to Manually Manage Music. So once I'm done with a song I delete it by selecting it from my iPod Library and selecting "Delete". However, I noticed that the songs are still on my iPod. For example if I go to the Artists L

  • Document type G2

    Hello! what is G2 for a document type within SD ? Regards sas

  • New Macbook pro (top of range) DIVX playback is terrible??

    Hi all Just brought my 1st ever Mac and went for the top end MacBook Pro. I have been trying to playback my DIVX files and so far have not got anything to play. I have tried installing both DIVX player and Perian but both have the same effect. I get