I am working on Premiere 6.5. why does my vid seem out of sequence and jumpy after exporting it as an avi?

I was near completion of an edit when my mother board died. I transfered the project over to my laptop, premiere could no longer read the source avi file that i was editing from. upon inspection I discovered that the avi file had becone corrupt and would no longer play back corectly so I ran it through a video converter saved it as a new file, this new file plays back just fine. When loading up the project I replaced the corrupt and AVI file with the new file. the software some how remembered all of my cuts on the time line. the vid took an unusual 10 hours to render and now plays back properly on the time line but after exporting it as both an AVI and MPG the exported files appear out of sink, out of sequence and jumps to footage that isn't even included on the time line.
whoever can get their heads around this one is a fricking legend.
Please help.

Please tell us about your source footage, that AVI. This ARTICLE will give you some background on "wrappers," like AVI.
What you describe sounds like the issues that one often faces, when trying to edit certain forms of .MPEG source footage. Both the OOS and the jumping to frames, that should not exist, are both manifestations of .MPEG's on the Timeline (not MPEG's with Export).
Good luck,
Hunt

Similar Messages

  • Why does my iPhone 4 gets very lag and unstable after updated to iOS 5.1?

    I have been using iOS 5.0.1 previously without any problem and smooth, however after i updated to iOS 5.1, my phone is getting unstable.
    Every time when i unlock my screen, it may lag for a few seconds. This issue does not happened when i'm using iOS 5.0.1. I did restore my phone using iTunes but the issue is still there. Anyone able to help me pls?

    Try restarting your iPhone 5 by holding down the on/off and the home buttons at the same time until you see the Apple logo.  Then give it a try.

  • Why does my logo come out solid sometime and translucent (like it should be) others

    I  just finsined posting a photo and added this logo.  Then I went to do another and the logo did not come out translucent like before

    Have you tried posting in the Adobe forums yet >  Adobe Community: Forum: Photoshop General Discussion

  • Genius only works on some songs?  WHy - there doesn't seem to be any rhyme or reason.  Decemberists yes, Lana del Rey no.  Ideas?

    Genius only works on some songs?  WHy - there doesn't seem to be any rhyme or reason.  Decemberists yes, Lana del Rey no.  Ideas?

    Is there a batch process that runs in the evening? Perhaps that ends up cleaning out the data from the buffer cache, turning logical I/O's into physical I/O's early in the morning.
    Can you check the statistics on the table before the process starts and after you re-gather statistics? Perhaps there is a nightly process that is altering the statistics at an unfortunate time or in an unfortunate way.
    The previous poster's comment about getting a trace file is excellent as well-- whatever your session is waiting on will be apparent in the trace.
    Justin
    Distributed Database Consulting, Inc.
    http://www.ddbcinc.com/askDDBC

  • HT1414 why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    why does my iPhone 5s shut down unpredictably and needs to be reset every time to start back up?

    Hi Cyprus11,
    Thanks for visiting Apple Support Communities.
    If your iPhone is shutting down unexpectedly, I recommend going through these troubleshooting steps:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • Texting on iPhone 5.  When texting to multiple people why does the contact list return to the "A"s after you select a contact and try to add the next one in order?

    Texting on iPhone 5.  When texting to multiple people why does the contact list return to the "A"s after you select a contact and try to add the next one in order?  This really slows you down when trying to contact 50 people with information.  iPhone 4 worked just fine.  Any suggestions on how to fix this?

    None of my pictures that I uploaded into iPhoto are in my Finder under Pictures.  Should I copy and paste my folders from iPhoto into here, in case something happens to my iPhoto program (in addition to backing them up onto an external hard drive like I already do)?
    No, that's just wasting space.  A back up needs to be on a different disk.
    Your photos are within the iPhoto Library.

  • Why does iMovie for iPad shorten the background song length after adding a photo?

    Why does iMovie for iPad shorten the background song length after adding a photo?
    I created a project a few months ago, and iMovie worked as it always had. I would create a project, add a background song, then add photos to fill up the song.
    When I created a project today, I added the background song (4m9s), then added a single photo, and the background song length was shortened to 6 seconds. I have never seen the app work this way. I know I can extend the photo to the length of the background song, but it used to be so much easier to add photos and sync them with the music as I desi
    I'm using iPad2 with iMovie v1.4.1.
    Thoughts?

    When I've added photos to a project they are added to a default time to appear. Honestly I've never looked at the time but 6 seconds sounds close. I'm guessing that since you added the photo after you add the music that its thinking you want the two to match in time length so it tunicates the music. Try adding the photo first then add the music. Good luck!

  • TS1559 Why does Safari kick me out randomly?

    Why does Safari kick me out randomly?

    That happens sometimes.
    Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The the 3G and 4G only has 256 MB of memory. The 5G 512 MB, This does not work for 1G and 2G
    Next try
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Saari and Clear Cookies, Data and History
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
      - Restore to factory settings/new iOS device.                       

  • Why does my MacBook Pro make background music and video quieter when I am on FaceTime?

    Why does my MacBook Pro make background music and video quieter when I am on FaceTime? When my girlfriend and I are trying to watch a movie on Netflix together while on FaceTime my MacBook Pro always decreases the volume of any background sound on my computer so I can barely hear it. Is there a way to fix this? Thank you!

    Have the same issue too. Apple can you please change this annoying feature. You are making long distance relationships more difficult.
    I like how Facetime was with the old iOS, where nothing was dimmed. OR at least maybe if you could give users the option to turn on or off dimming of facetime.

  • Why does my ipod only show an apple and wont start up

    Why does my Ipod only show an apple and wont do anything else>  And holding down the two buttons has done nothing!

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Why does my iPhoto seem to get "stuck" a lot of times to the point where I have to force quit it and how do I fix it?

    Why does my iphoto seem to get "stuck" a lot of the times when I try to exit it to the point where I have to "force quit" it and how do I fix the problem that causes it?

    With the amount of information you've provided it's impossible to offer a potential solution.  We can't see your computer so we need to know the details of your problem and setup, i.e.:
    what version of iPhoto are you using?
    what system version are you running?
    does this only happen when you try to quit iPhoto?
    what fixes have you tried?
    where is your library located?
    did you apply any updates or upgrades just prior to the problem occurring?
    are you running a "managed" or "referenced" library?
    what type of Mac?
    how much free space on your boot drive?
    Happy Holidays

  • Ipad displays "ipad is disabled connect to itunes", I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?

    Ipad displays “ipad is disabled connect to itunes”, I have tried putting the ipad into recovery mode and then restoring but that does not work. I have also tried doing a hard reset of the ipad and that does not work either. Any ideas?
    My son let one of his friends use his ipad. The next time he tired to use it he could not get it unlocked, I tired to unlock it but it kept telling me that I had the wrong pass code. With out me knowing my son continued to tire until it completely disabled it self.

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT201250 If time machine backups hourly.  Why does it need to backup daily, weekly and monthly

    If time machine backups hourly.  Then why does it need to backup daily, seekly, and monthly?

    It doesn't.
    What it does is discard intermediate backups at the end of 24 hrs and keep just three spaced backups from the previous day.
    At the end of the next day, that day's will be reduced to 3, and the previous 3 trimmed to one; the last backup of that day.
    Daily backups are kept for a month, then trimmed to the last backup of the week.
    The weekly backups are kept until the disc runs out of space and TM starts deleting the oldest ones.

  • Why does my iphone have an itunes icon and a charger shown

    why does my iphone have an itunes icon and a charger shown

    Try this
    If you can't update or restore your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT201263
    Best of Luck

  • While printing, why does PE11 crop the out put?

    While printing, why does PE11 crop the out put?

    Did you crop the photo to the same aspect ratio as your print size? If not, then the software will crop it for you.

Maybe you are looking for

  • Error while opening an workbook

    Hi   I have done some changes to a query and transported Query as well as Work book to production. When i open the work book I get the below error and gets disconnected form BW <internal Error > Receiving from theBW server failed BW server raised exc

  • Converting MS SQL Server Query to Oracle Query

    Hi There, I've a strange problem. My project uses both MS SQL Server and Oracle server at run time. I've lot of queries which are written in MS SQL Style. Now, iam planning to write a helper class whic converts MS SQL Query to Oracle Query. Please He

  • JBO-25005: Object name 1230_CONTEXT_VO for type View Object is invalid

    Hi I am getting JBO 25005 error when I do self appraisal and click cancel or continue button. We have extended VO and CO on this page, any thoughts what can be the reason behind this error? oracle.apps.fnd.framework.OAException: oracle.jbo.InvalidObj

  • Copying data between databases

    Hi Gurus, Is there any way to copy data from one DB to another DB, other than COPY command ? My reqt is this. I want to copy data from one DB to another one periodically (weekly basis). I'm trying to create a USER JOB for this and call a PL/SQL proc

  • Cant view/ watch my husband video message

    my husband can view my video messages but  i cant watch his video messages reply.......can u pls help me so that i can view it also.tanx.