I am working with Lr5 and trying to send my photos to PsCC via camera raw.

Trying to move photos from Lr 5 to PsCC via camera raw. It is going directly into PsCC and by passing the camera raw plug in. What can I do to include that camera raw step?
In Lr5 thumbnail, >right click > edit in Ps and then it goes into Ps by passing the camera raw step. Suggestions?

Lightroom and ACR are equivalent. They both contain and work off the same raw conversion engine - one as a standalone application, the other as a Photoshop plugin.
When you "Edit In" from Lightroom the file is actually processed by ACR, but "silently" and bypassing the interface. What happens is that Lightroom just passes its settings to ACR - you've already made your adjustments there, there's no need to bring them up a second time in ACR.
This is as long as the two are in version sync. If not, ACR can't read all the settings from Lr, so it switches to another mode. In that case the file is fully processed by Lightroom, which then sends a rendered TIFF or PSD to Photoshop. That's a little less flexible and means you can't use some of the options you have in the "sync" mode, like smart objects, open as layers, or HDR. But otherwise the result is identical.

Similar Messages

On my Mac, I am working with IMovie and trying to burn to a dvd and get error message 2135? Never got this before. What is it? Thanks

Using IMovie, I get error 2135 when trying to burn to a DVD. Actually, it is during the preparation stage. Never got this before Whats the problem? Thanks

Hi
You must tell more
• Error 2125 - I recognize - but -2135 is new to me
The other is in regard to Movie Length in TIME + MENU time - as this is the limiting factor in iDVD (not GBs or other just time)
a. How many movies
b. duration of each movie
c. Menu selected
d. Is MENU still and silent - or animating and with audio (Takes lot's of the movie time)
e. Encoding quality selected in iDVD
f. HOW did You go from iMovie to iDVD
g. What version of iMovie and iDVD are You using
h. FREE Space on Start-Up (Mac OS) Hard Disk - HOW MUCH
As You see there are lot's of info needed to be of any relevant help
iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
Yours Bengt W

My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

My itunes says that my iphone is synced with another itunes. It gives a name but how do i find out which library it is? I working with 2 computers trying to get music off of one and on to my new one.

See Recover your iTunes library from your iPod or iOS device and this migrate iTunes library post.
tt2

Hello, my itunes app is getting shut down every time I want to open it. Ever since I downloaded the last two updates. I tryed repearing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes

Hello, my itunes app is getting shut down every time I want to open it.
I don't know if it's related but ever since I downloaded the last two updates. I tryed reparing the file and uninstalling and installing several times. Still, is not working. I work with music and need my itunes up and running. Does anybody know how to fix this?

Hi Vero Torres,
If you are having issues with iTunes unexpectedly quitting on launch after on your Windows machine, you may find the troubleshooting steps outlined in the following article helpful:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

I am creating webpages with frontpage and trying to make collapsible lists. The lists collapse and work correctly in "preview" mode, but do not work when accessed through firefox or explorer 8. Does anyone know what I am doing wrong?

Welcome to the 'wonderful' world of HTML5 e-learning.
In my view, from the issues I am seeing everywhere, HTML5 output from rapid e-learning tools such as Captivate is not ready for the kind of mobile device e-learning you want to develop.
Sorry to be pessimistic, but you may need to consider going back to the drawing board and coding it from the ground up.

My pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same

my pc keeps saying usb device not recenized iv tryed so i cant restore my ipod touch 3g it works with iphone4 iv tryed diffrent wires and still the same plz help

Hello again Graham,sorry I spelt your name wrong on my last post ... Ok I went to the device manager and found a yellow mark. I went to it and selected re install driver. I then re booted my pc. I now have no yellow marks in the list but my pc still wont recognise my iphone.
Could I try anything else ?
Cheers Chris

FaceTime no longer working with Yosemite and IOS 8.1

I have used FaceTime flawlessly for some time with no issue.
After I upgraded to Yosemite on my MacBookAir and IOS8.1 on 5S and iPad air, I've had a problem connecting.
When I get a call, all the devices ring (as they should) but it will not connect on the first device I pick up on. It says connecting
but all the other devices keep ringing and finally it says I have a missed call. The connection does not happen. If I turn off
all devices except one, it will work...... do we have a bug here??

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

PC Sync doesn't work with Outlook and 6300

Whilst I appreciate there maybe other posts similar to this there doesn't seem one that give enough information and when the suggestions are tried (the ones I read) they didn't work.
I can sync with Nokia Communication centre (Emails and messages) but my 6300 won't sync with outlook (PC Sync)- contacts, notes or calendar.
Here are the details:
Windows XP SP3 & Also Vista Business SP1
PC Suite is 7.0.7.0 (Also tried the version that came with the phone).
Connection method - USB
Phone Nokia 6300 latest firmware V 06.01 RM-217 (as checked on 27/7/2008)
Outlook 2000, 2003 & 2007
Messages
Nokia PC Sync Warning
PC Sync information.
PC Sync has encountered a problem and has terminated the synchronisation.
Possible Solution
Please check your Synchronisation settings and ensure your phone is in the Idle state, then restart the Synchronisation.
Phone Message
Data Transfer not possible
Synchronisation Info:
Calendar: Incomplete. Unable to process all items. 0 Sent, 0 Received
Contacts: Incomplete. Unable to process all items. 0 Sent, 0 Received
Notes: Incomplete. Unable to process all items. 0 Sent, 0 Received
Calendar Notes: Updated on other device New:0 Removed:0 Updated: 0
Tried this on three computers with two with XP Pro(Outlook 2000 & 2003) and one with Vista Business (2007). Added new folders for test and also created a clean Outlook installation (2000 on one XP machine). None of these installations work with synchronisation. Tried just Contacts, Notes and Calendar on their own. Still no good.
The main reason for wanting to do this is to transfer my Calendar from my 6230i (there seems to be no other way of doing it) and use it on my PC.
I have managed to copy my contacts using PC Suite 7.0.7.0 by having both phones connected and selecting all the contacts from the old phone to the new phone in Nokia Communication Centre. Seems you can't do this on old suites. I can also see messages there as well although I haven't tried to copy them yet.
What is interesting is that with all the same settings in PC sync and the same folders in outlook I have been able to synchronise my 6230i calendar both ways with no problems at all. It is just the 6300 that is giving problems either way.
So is this a firmware bug, PC Suite bug, Interface bug, or just that some settings on either phone or PC that need changing to suite the 6300?
Without this working there is no way that my desktop calendar can synch with my phone. As I said the 6230i was no problem.

Thanks for that. I did indeed manage to do a calendar backup from my 6230i and then restore it to my 6300 and YES it did work.
So how come that a calendar that obviously works on the 6230i phone can be restored to the 6300 phone, and the 6230i can do a sync to outlook. Yes I did that as well. I managed to sync the 6230i to a clean calendar in outlook, Modify it the calendar in Outlook and then sync it back to the 6230i. I then had to back it up in order to restore it to the 6300.
Are you seriously saying that it is the format of the calendar when the 6230i does it so well. It seems obvious to me that it must be either the sync firmware of the 6300 or the PC connect software not taking account of any 6300 firmware differences.
As a test I added an appointment to a completely blank calendar on my 6300 and tried syncing that with the same errors. When syncing you can for a split second see something trying to be synced but too fast to read. It would be more helpful if there was a proper log of actually why and where the problem occurred. So if Nokia (or anyone)has some debug software please can I try it?
Whilst I have, after nearly a week of trying and search the internet, found a solution to my immediate problem (copying the calendar), it appears there isn't a solution to integrate the phone to Outlook - unless somebody know different.

Handoff not working with Yosemite and iOS 8

I have three Macbook Pros in my household. Two are mid 2012 models and the other a late 2012 model. Each is supposed to support the handoff feature of Yosemite and ios8. Everything seems to work properly between my daughter's late 2012 MBP and her iPhone 6. But on the other two MBPs in our family the continuity feature does not work on either of them. Receiving and sending calls works fine. But the continuity does not work even though all three MBPs and all three iPhone 6 are on the same wifi network.
I've tried all the suggestions that I could find. Toggling off and on the various settings on the MBPs and the iPhones.
John

Thank you for responding to my issue. I spent the better part of two hours trying to get this to work. Bluetooth is enabled on all devices. Each computer is set in Preferences/General to allow Handoff. All computers and iPhones are on the same WiFi network. I toggled all of the major settings off and on. Rebooted each of my computers several times. I finally conceded defeat. Then my daughter asked to have a try at it. She worked on the first MBP for about thirty minutes and informed me that she had gotten continuity to work. And indeed, on her MBP late 2012 she is able to use the continuity features in both directions between her computer and her iPhone 6. But it only works with Mail and Safari. I asked how she accomplished this feat. She said she turned off "everything" on her computer and iPhone (WiFi, Bluetooth, "Allow handoff" under Preferences/General) and then rebooted both the iPhone and the computer. She then turned everything back on. This worked for her. So we tried the same thing on my MBP and iPhone 6. Now continuity works partially. Email activity is mirrored on both the MBP and the iPhone regardless of which device initiates the continuity activity. But Safari activity on the computer is mirrored on the iPhone but not in the opposite direction. There is no continuity function for Pages in either direction. The telephone connectivity works fine on all of my devices– 3 MBPs, Mac Pro, iPad Air, 2nd gen iPad and 3rd gen iPad.

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Working with placeholders and templates in 10gR4

I am new to 10gR4 features. Can someone help me in working with placeholders and templates in 10gR4. Is there a document available on that?
This is what is did. I created a primary page which contains a contribution region for list of articles(dynamic list fragment). Next, I created a secondary page (hcsp file) which is designed to create/update new artcicles. I also added a placeholder before the contribution region for this article by name ArticleDetail.
I was able to add new articles and work with them as usual like in 10gR3.
But when I tried to access the contents of a particular article using wcm_place_holder service I am not able to see any contents.
This is the url for the request
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&siteId=TestSite&dataFileDocName=TESTCONTENTFILE&templateDocName=ArticleDetail
where the TESTCONTENTFILE is the content id of the article data file and ArticleDetail is the name of the placeholder placed above article contribution region.
I tried changing the value of templateDocName to content id of the article (TESTCONTENTFILE) and also tried the content id of eondary page file for article, but the same result. I am not able to see anything on the screen.
Also tried the same with above values with placeholderDefinitionDocName instead of templateDocName parameter but no good.
Anything wrong I am doing here?
Regards,
Pratap

I tried something different and I am getting the response but the content is not html.
This is what I tried
http://hd-pratapm/ucm/idcplg?IdcService=WCM_PLACEHOLDER&dataFileDocName=TESTARTICLE&templateDocName=TESTARTICLE
and I got the response which is xml data. I think it is the contributed data file for TESTARTICLE.
What we are looking for is the html text for presenting the article directly on external sites. The documentation for WCM_PLACEHOLDER says that it should get html directly. I am not able to get it.
This is the snippet of code of articleDetails.hcsp secondary page
================================================================================================


 



 
 




================================================================================================
Can you please suggest what else needs to be done in order to get html repsonse from WCM_PLACEHOLDER service.
Regards,
Pratap

NXT Flatten to String Not Working with Clusters and Arrays

Hello,
My name is Joshua and I am from the FIRST Tech Challenge Team 4318, Green Machine. We are trying to write a program that will write to a configuration file and read it back. The idea is that we will be able to write to a config file from our computer that will be read by our autonomous program when it runs. This will define what the autonomous program does.
The easiest way to do this seems to be flattening a data structure to a string, saving it to a file, and then reading back and unflattening it. The issue is that the flatten to string and unflatten from string VIs don't seem to work with arrays and clusters on the NXT. It does work when running on the computer. We've tried arrays, clusters, clusters in arrays and arrays in clusters, none seem to work. Thinking it was something to do with reading the string from a file, we tried bypassing the file functionality, still not working. It does work with basic data types though, such as strings and numbers.
No error is thrown from what we can tell. All you get is a blank data structure out of the unflatten VI.
The program attached is a test program I've been working on to get this functionality to work. It will display the hex content of what is going into the file, coming out of the file, and then the resulting data from the unflatten string, as well as any errors that have been thrown. The data type we are using simulates what we would like to store. There is also a file length in and out counter. The out file is a little larger because the NXT write file VI adds a new line character on to the end (thus the use of the strip white space VI). This character was corrupting even basic data types saved to file.
I would like to know if there is a problem with what we are doing, or if it is simply not possible to flatten arrays on the NXT. Please ask if you have any questions about the code. Thank you in advanced!
Joshua
Attachments:
ReadableTest.vi ‏20 KB

Hi jfireball,
This is a very interesting situation. Take a look at what kbbersch said. I also urge you to post in the FTC Forums. You posted your question to the general LabVIEW forums, but by posting to the FTC Forums, you will have access to others that are using the NXT hardware.
David B.
Applications Engineer
National Instruments

Working with NTSC and PAL

Hey,
So I'm editing a live concert and the director wanted to work with iPhones and DSLRs so I asked them to all film in 30fps (as iPhones only do NTSC at 30fps) but they forgot and now I have to edit with 25fps (PAL) and 30fps. I've multi-camed the four 25 files (so the project is in and got a decent cut but now I'm trying to sync the two 30 files to the project. I've thrown them in the timeline and applied Rate Conform but it's reading the 30 files as 24s so it's applying a "24 to 25" conversion instead of a "30 to 25" conversion resulting in it being even worse out of sync...
How do I manually tell Rate Conform that the files that I want to conform to 25 are 30 not 24?
Also, is there any chance I can add the two 30 files to the multicam to make it easier to cut? Can I just add them or will I have to start the multicam file over again?
Cheers!

… I guess, I'm a bit lost in translation ....
1) adding 25fps material to a 30fps timeline AND 'conform speed' will speed-up this clips, NOT make'em synch! to add 'any' fps to a project, FCPX will care, to keep a second = a second - independently of fps. Or, in other words: clips are synch automatically. 'conform speed' is e.g. to create slowmo by conforming 60fps reecording to a 24fps timeline ......
2) what makes you believe iPhone is 30fps? iOS devices offer a 'variable' fps, under low light conditions, the fps can drop down to 18fps, 15fps .... worse: vary within a clip, weird stuff like 21.67fps! I'm not surprised, FCPX identifies iPhone recordings as 24fps - most probably they ARE 24
3) before import to FCPX, I would 'convert' iPhone recordings with Mpeg Streamclip to a 'steady' clic; open recordings, repair timecode, export as prores/30fps
(and, just to mention: frame-rate ≠ NTSC/PAL ; and iPhone can not record in NTSC nor in PAL ......)

Working with Flex and Central

Hi,
I am new in Flex and Central and interested in working with
Flex and Central and I'm currently trying to run one of the samples
from the "Central Flex SDK", the HelloFlexCentral. I have an error
when trying to run the application. The "import.mx.central" line is
not recognized.
I don't understand how to connect Flex and Central. My
questions are :
- Do I have to install a JRun environment to run/develop this
kind of application or can I develop the application without a JRun
Environment ?
- Can I deploy my application on a IIS server for example
(and then all the users will install it in central by accessing
this webserver) ?
- Where do I have to put all the "CentralIntrinsics" stuff to
avoid this error I encounter ?
Thank you for your answers.
Olivier

If you want three distinct notes, I suggest you cut it into three samples, then using flex pitch drag the notes to the pitches you desire. Keep in mind that the farther away a note is from it's actual sampled pitch, the worse it's quality will be.

Working with Classes and Arrays

hello to all,
public class Store
//private data
private Person list[];
private int count;
private int maxSize;
//constructor starts
public Store(int max)
count = Person.count(); //sets count to 0
maxSize = max;//maxSize is equals to max
Person list[] = new Person[maxSize];
}//end of store
//constructor ends
//accessor starts
public int getCount()
for(int i=0; i<list.length; i++)
int result = list;
return result;
}//returns the number of elements currently in store
the code above is working with classes and some arrays
what am trying to do is to display what the array holds
and then i meet an error saying that
INCOPATIBLE TYPES - FOUND PERSON BUT EXPECTED INT
Please note that am new to this!
Thank you in advanced!
<img src="file:///C:/Documents%20and%20Settings/fh84/Desktop/untitled.JPG" alt="" />

public class Store
 //private data
 private Person list[];
 private int count;
 private int maxSize;
//constructor starts
 public Store(int max)
 count = Person.count(); //sets count to 0
 maxSize = max;//maxSize is equals to max
 // Person list[] = new Person[maxSize];
 Person list[] = new Person[maxSize]; //set tne
 }//end of store
//constructor ends
//accessor starts
 public int getCount()
 for(int i=0; i<list.length; i++)
 int result = list;
return result;
am sending the code again

I am working with Lr5 and trying to send my photos to PsCC via camera raw.

Similar Messages

Maybe you are looking for