I appear to have three different versions of photoshop Cc on my computer. They are Photoshop CC, Photoshop CC (64 bit) and Photoshop 2014. Am I able to remove the first two without affecting the preformance of the last version?

Help as this is all taking up so much space on my computer.

It is okay to remove the ones you do not need as they are not dependent on one another. If any problems arise afterwards you can post here again to get help.

Similar Messages

Can we change the UCCX server from single node to the first node without affecting it's configurations

Hi all,
Firstly I was using the single CUCM7.0 server with the single UCCX 7.0 server. Now I am going to add the second CUCM and UCCX in the cluster. I was first configured the UCCX server as a single node. Now I have to configure this as a first node. How I could configure this from single node to the first node without affecting it's configurations..??????
Regards
Ali Raza

Hi Aaron,
How could we do the change on Imhost file. How we add the both servers in that file?
Below is the Imhost file txt.
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#      #PRE
#      #DOM:
#      #INCLUDE
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
# The following example illustrates all of these extensions:
# 102.54.94.97     rhino         #PRE #DOM:networking #net group's DC
# 102.54.94.102    "appname \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Regards
Ali Raza

I have a Nano gen 6. When I download photos they are all color negative. What gives, and what is the fix?

I have a Nano gen 6. When I download photos from itunes/iphoto they are all color negative. What gives? What is the fix?

It worked! Thanks so much. Now my next question is how in the world is anyone supposed to figure this out on one's own?

C309a (Duplex Printing): the first two pages don't "duplex"

Hi, I've got a little annoyance here: I love the duplex printing feature, but the first two pages don't "duplex!" The first page prints fine but doesn't get retracted back inside, and then the second page prints upside-down on a new sheet of paper. The rest of the document "duplexes" as expected. Is there some option I'm (not) enabling?
I'm running Windows XP SP3, wireless printing. Also for what it's worth, everything I've duplex-printed have been PDF files.
Hopefully there's a solution and I don't have to continue leaving the first two pages of my documents blank
Thanks in advance!

If you have blank pages in your file you must set the print dialog through print booklet to print blank pages.

I have three different listings for Bob Seger on my iPod (bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

"Move, trim, or delete clips in the primary storyline without affecting connected clips" doesn't work here

Move, trim, or delete clips in the primary storyline without affecting connected clips
That’s just what I was waiting for!
But it's very difficult for me to use this option
First af all the choice of the "Grave accent", which isn't present itself on the Mac keyboard, is somewhat strange in my opinion.
So, according to my keyboard viewer, to get grave accent I have to use alt-\ or alt-9, which is itslef too complicated.... Couldn't they program a simple modifier key (alt, or command, or ctrl...)?
Anyway, in both cases I get strange behaviours.
Infact I get alert sound, which meanes something strange is happening, and the behaviours are not what I want...
Any help?
Thanks

You can set that key to something else that suits you better.
(just as you can customize keyboard shortcuts all over the application, changing and adding shortcuts as you wish).
The name for this command is "Override connections".
Go to Final Cut Pro->Commands. This will open the "Command Editor".
In order to not mess with the default set of commands, first make a copy by selecting "Duplicate..." in the popup menu at the top left of Command Editor. Call this something meaningful (or leave it as "Copy of default").
Enter "Override connections" (without the quotes) into the search box at the top right. Now you can enter an appropriate keyboard shortcut for it.
(Note: if you choose something that is already assigned to a different function, you'll get a warning dialog box)

How to I get my ipod connected to wifi for the first time..it's an ipod tough 2010 version, refurbished

how to I get my ipod connected to wifi for the first time..it's an ipod tougch 2010 version, refurbished

Hi,
To connect your iPod to wifi just:
     1. Open settings,
     2. Tap Wi-Fi,
     3. Make sure the Wi-Fi switch is on,
     4. Tap the network you would like to connect to,
     5. If the network has a password then type it in and press join.
For hidden networks(networks that don't broadcast their SSID(name))
     1. Follow 1-3 above,
     2. Tap other,
     3. Type in SSID(name) of the network,
     4. Select the security of the network,
     5. If there is a password type it in,
     6. Press Join.
Some public networks may now show a login screen where you may have to agree to terms and conditions, enter your email etc...

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources. How do I enable my iPhone to do it? Tks in advance.

I have three different e-mail addresses, and need to receive the incoming e-mails from the three sources into my iPhone (it's presently receiving msgs from only one of them). How do I enable my iPhone to do it? Tks in advance.

Many thanks for your help!

I have three different computer with three different libraries. All are under the same sign on and password, can I sync them so I have the same content on all computers?

I have three different computer with three different libraries, but all are under the same sign on and password. Can I sync the libraries somehow and get all my music and movies on each computer?

Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
File/New Playlist

I have a MBP 15" with iPhoto 9. When right clicking on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty one and merge the other two without getting duplicates?

I have a MBP 15" with Iphoto 9. When I right click on icon in dock 3 iPhoto libraries come up; one empty, one with 35,000 photos and one with 30,000 photos. How can I delete the empty library and merge the other two without getting duplicates?

You can delete the empty one by dragging it to the trash ( test everything before emptying the trash)
Merging libraries requires iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ - it is the only current solution to merging libraries
LN

We have three different logins or accounts on our computer. In the administrator's login, iTunes loads, syncs, and accesses the store fine. On my two kids' logins, however, loading, syncing and acessing the store takes exponentially longer. Any ideas?

We have three different logins or user accounts on our comoputer. In the administrators' login, we have no trouble opening iTunes, syncing the iPod or accessing the store. However, in my two kids' logins, getting iTunes to recognize the device, sync it, or access the store takes exponentially longer.
Does anyone have similiar trouble with this, and if so, do you have any suggestions?

I think this is an excellent indicator that not only is Palm reviewing the feedback from the support forums here, but actively reviewing feedback/comments/wishes on other sites as well.
As the original poster copied this (quite solid, IMO) wishlist from Pre Central, the palm support staff acknowledged first seeing it there.

I have three different data base regions

Help is Greatly appreciated.
I have three different databases - development, QA and Production.
my requirement --I have to insert 20 new records into "scott.PERMANENT" table
2)In the Developemnt,QA both regions in the "scott.PERMANENT" table , 3 records are already presnet in the above new 20 records. 3)In the Production database , i dont have any data and have to insert all of the records.
So inorder to insert the data i have to use the same script in all the regions meaning i have to iclude all the 20 new records in the insert script ,but based on the region name it should check and insert those records .
could anyone please kindly give me an idea how to check the region name and insert.
Your help is kindly appreciated.

Hi,
975482 wrote:
Help is Greatly appreciated.
I have three different databases - development, QA and Production.
my requirement --I have to insert 20 new records into "scott.PERMANENT" table Don't create your own tables in Oracle-supplied schemas, such as SCOTT. Why not create your own schema?
2)In the Developemnt,QA both regions in the "scott.PERMANENT" table , 3 records are already presnet in the above new 20 records. 3)In the Production database , i dont have any data and have to insert all of the records.
So inorder to insert the data i have to use the same script in all the regions meaning i have to iclude all the 20 new records in the insert script ,but based on the region name it should check and insert those records .Use MERGE instead of INSERT. If you're using Oracle 10 or higher, then you don't even need a WHEN MATCHED clause; if you only have a WHEN NOT MATCHED clause, it will simply ignore the rows that you said to add but already exist.
If the columns have unique constraints, you can also INSERT all the data, and use an error logging clause
I hope this answers your question.
If not, post a complete test script that people can run to re-create the problem and test their ideas.
For example:
-- In all 3 databases, the permanent table looks like this:
CREATE TABLE permanent ...
-- In Production, where it has no rows, I could populate it like this:
INSERT INTO permanent ...
-- This is how I want the table to look in all 3 databases when everything is finished.
-- But in Development and QA, the table does have some rows already, like this:
TRUNCATE TABLE permanent;
INSERT INTO permanent ...
-- What statement(s) would get the table to the finished state regardless of how it starts?Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

The photo print quality from my Mac to my Epson Artisan 810 is poor. When I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.

The photo print quality from my Mac to my Epson Artisan 810 is poor. I just purchased my iMac for my photography business in Jan. (this is my first Mac). When I first tried printing, I noticed the quality wasn't as good as I expected it to be. Then, I had to print 4-3.5x5s on a sheet, so I e-mailed the image to myself and opened it on my PC to print it (much easier to print that way on PC in Windows Photo Gallery - I think it's impossible to print that way in iPhoto). That's when I first noticed that when I take the same photo files (JPEGs) to my PC to print to the same printer without even uploading them to the PC, they print brighter and crisper from my PC.
I've already been on the phone and e-mail w/Applecare many times over this issue. We've tried creating a test user and printing from there, and we've tried reinstalling the OS. I've tried printing from iPhoto, ImageCapture, and Preview apps/utilities, all w/the same result - no comparison to the PC-printed versions (no enhancements have been performed on the PC).
I'm out of ideas, and so is Applecare. They say it's most likely a driver issue b/c the printer is outdated, and that the only solution is to buy a new printer. BUT it is a pain for me to purchase a new printer - it takes days of research due to the nature of my business and the fact that I need a printer that can print directly onto a disc. I love this printer and don't want to have to buy a new one if I don't have to.

englishfreak2004 wrote:
Yes. I've checked for updates, and the driver I installed is the same as the one on Epson's website. I also spoke with Epson Customer Service, which was a dead end. Apple says the problem is due to an Epson driver issue (blaming Epson), but Epson says that with the older printers, it's actually Apple who creates the driver, so the problem is actually with Apple. Typical he-said, she-said...
Maybe not. Probably worth checking here:
Epson drivers for Mavericks:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp

I appear to have three different versions of photoshop Cc on my computer. They are Photoshop CC, Photoshop CC (64 bit) and Photoshop 2014. Am I able to remove the first two without affecting the preformance of the last version?

Similar Messages

Maybe you are looking for