I attend St. John's university and use ipad 3 to do most of my work. Since the iOS 6 update I am unable to connect to their network. I can connect to netgear router I have at home but I need the wifi at college as well. Is there anything I can do to fix?

I need wifi at college and can't get it since the iOS 6 update. Does anyone know how to fix this?

Talk to the support people at St. John's to see what the problem is and what they recommend.
Inform Apple of the problem at http://www.apple.com/feedback/ipad.html

Similar Messages

Unable to connect to netgear router and internet

I've installed Solaris 10 1/06 (x86) on a system running an intel mainboard model D865PERL. This has a built in ethernet controller ( Intel 82547EI gigabit lan controller) and the mainboard appears on the bigadmin hcl as being supported. The OS recognizes the built-in NIC as e1000g0 but during initial installation it attempts to configure e1000g0 first thing then responds with "skipped interface e1000g0" then proceeds with the installation.
I choose Networked and run through the installation (or following a sys-unconfig) selecting to enable DHCP but it returns "Could not contact a dhcp server on the network interface e1000g0." I then have to set it up staticly to resume the configurator. I specify the e1000g0's ip address as 192.168.0.5 with a subnet mask of 255.255.255.0. I choose not to enable IPv6 (ive tried it with IPv6 enabled) and no Kerberos. I attempt to specify DNS for name service and use my internet providers domain name (both the name and the resolved ip address associated with it) with the two DNS server ip addresses resolved by the WAN setup on the router (Netgear FR328S), selecting no search domains. But it is unable to locate my hostname on the provided DNS's i entered. dunno why it would say that, it really doesn't matter does it? Anyway, I specify no name service to proceed. i choose no to the question in regards to overriding the system's default NFS version 4 domain name to continue.
It knows it has a cable connection but I'm unable to see the router, even though ive specified 192.168.0.1 as the default route (ive also tried setting it to detect the default route on reboot but it fails). The router doesn't see the NIC as a connected device either (im setting here on another computer running xp :() Ive tried disabling the DHCP server feature on the router and I still cant see it. Ive tried setting the NIC's ip address and MAC address as reserved in the LAN setup on the router (this works for my winXP drive where I need a static IP address and also have access to the internet). I've tried leaving the reserved IP address assignment (attached to the NIC's mac address and host name that i specified) with DHCP enabled but I'm still unable to resolve an IP address from the dhcp server. I made sure the router had the latest firmware and went through the configuration with a fine toothed comb, so to speak. nothing seems to work.
I tried to connect directly to the internet device, removing the router and it still fails to resolve an ip address via dhcp. what am i missing here? Ive run through this multiple times now and im at a loss. Ive also referenced sun's System Administration Guide: IP Service to try to resolve the issue but im now all I'm doing is going in circles.
# ifconfig -a
lo0: flags=2001000849<UP, LOOPBACK, RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 192.168.0.5 netmask ffffff00 broadcast 192.168.0.255
ether 00:13:20:47:6c:48
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interfacd
192.168.0.0 192.168.0.5 U 1 0 e1000g0
224.0.0.0 192.168.0.5 U 1 0 e1000g0
default 192.168.0.1 UG 1 0
127.0.0.1 127.0.0.1 UH 4 85 lo0
# prtconf -pv
Node 0x000019
compatible: 'pci8086,1019.8086.301f.0'.....etc
model: 'Ethernet controller'
subsystem-vendor-id: 00008086
subsystem-id: 0000301f
vendor-id: 00008086
device-id: 00001019
name: 'pci8086,301f'

Couple of suggestions:
Work first on seeing the router, using a static IP and pings.
Forget about DNS, DHCP, etc for now. If you don't see the router, nothing is going to work.
You don't need to reboot or do sys-unconfig every time. Just change your settings using ifconfig and route add. Actually, you don't even need to set the route to be able to ping something inside your subnet.
By your output of ifconfig, it seems that the NIC plumbed correctly.
In the Solaris machine, try pinging your own IP address to make sure it responds and you don't have any issues with the NIC/driver.
Make sure the cable and port in your router work. If you can use them with Windows, you should be able to use them with Solaris. Unless...
Try using a crossover network cable to connect the Solaris computer to the router. This is personal experience: I had a Blade 100 that would not see my router. After a couple of hours of trying just about everything, I used a crossover cable and voila! it worked. Why? I don't know :) , but it worked...

Buy and use iPad 3 within 30 days will be exchanged for the iPad 4

Good News for people who just bought ipad 3 within 30 days, Some Apple stores will apply exchange policy for ipad3 to get ipad4 .First store in San Francisco ! Let's call your Apple store and ask them ! Anyone knows this ?

Good News for people who just bought ipad 3 within 30 days, Some Apple stores will apply exchange policy for ipad3 to get ipad4 .First store in San Francisco ! Let's call your Apple store and ask them ! Anyone knows this ?

Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router

HP PAvilion dv1000, Windows XP
Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router.
I had been able to print wirelessly from laptop to HP 7310 Officejet all-in-one, but now all I get is "document failed to print" message. I can get documents to print on this printer using my smart phone, but not the laptop.
I have used "find printer" button on print screen and can see the printer to select.
Any suggestions?
This question was solved.
View Solution.

Figured it out after looking at a few other posts...
Configured port to printer IP Address and now it is printing perfectly.
Thanks for having posts out there to review.

HELP! send but cant receive on new broadband connection via netgear router?

I have posted a recent question as I cant receive mail but I can send it both through outlook express on classic9 and mail. I have recently got tiscali broadband and a netgear router, I have a pc and emac connected through the router which can accommodate 10 computers. I have re-set the passwords and user ID/names so I think they all match (unless I have something hidden somewhere). I did not have any trouble on my NTL dial up connection with either mail or outlook. I noticed from one of the top guys on the forums he suggested-Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list......I would like to know if this means built-in-ethernet or tiscali, as I have it set on automatic....is this right or wrong?? Also there was something said about a router having a firewall, which I can access on the PC but have never seen it on the emac or set it up I dont think (maybe unknowingly), where would I find it if the emacs cable goes to the router. Tiscali do not support Apple Macs by the way, so they are more than reluctant to get involved either by e-mail or on the phone. I can access my mail if I go to the tiscali web site because I can connect to the internet with intenet explorer no problem. I really just want to find the problem so as I can receive my mail in either outlook or mail....please help.

> I would like to know if this
means built-in-ethernet or tiscali,
as I have it set on automatic....is this right or
wrong??
I don’t understand the question. If you choose
Network Port Configurations from the
Show popup menu in System Preferences >
Network, there is no such thing as an “automatic”
setting there, only the list of available port
configurations (network interfaces)...
*In network preferences the 'network' box displays with 'Location'- which in mine there is a choice of 5 options, the chosen one is Automatic....is this correct?
where would I find it if the emacs cable goes to
the router
I don’t understand this either. You can see where the
cable goes by looking at it. What do you mean?
*Yes I can see the cable, but is there an Icon floating around that I have not found which will give me the status of said router.?
Actually, what’s the problem exactly? Is it that Mail
doesn’t check for mail on this account, or that it
checks but retrieves nothing, or what?
*Yes it checks for mail, the spinning wheel goes round in the right hand corner then it displays a box:::: 'Enter password for Account G&L....The POP server "pop.tiscali.co.uk" rejected the password for user G&L....Please re-enter password or cancel, save as keychain
What type of mail account is this (POP, IMAP, .Mac)?
*Mail type is PoP & Smtp
Could it be that Mail or this particular account is
in an “offline” state? Is the Mailbox > Go
Online command enabled or disabled?
*I can send Mail without a problem, so I dont think this particular mailbox is offline, but If it is applicable I will check it anyway.
Go to Preferences > Accounts > Advanced. Is
Include when automatically checking for new
mail ON or OFF?
*Again I will check this.
What’s the time interval chosen in Preferences >
General > Check for New Mail?
*I will check and let you know but I think it is all password box related for some reason as my password has not changed at all.
Open Window > Activity Viewer and tell Mail to
check for mail on this account. What do you see there?
*The Activity veiwer has a red octabon in the top right hand corner and a blue&white barbers pole in motion and the text says fetching new mail and sending password, then I get the box asking for password as its been rejected.
*I have configured as DHCP in the TCP/IP menu
There is no PPPoE connection box ticked ...is this wrong?
built in Ethernet configures Automatically.
I hope you can help me as its driving me NUTS!!
Thanks in hope.

My iPhone 4 won't connect to our WiFi at home, but will at other WiFi spots. However, my parent's iPhones work and connect just fine at home using WiFi. I have called and talked to several people and no one seems to be able to help me.

my iPhone 4 won't connect to our WiFi at home, but will at other WiFi spots. However, my parent's iPhones work and connect just fine at home using WiFi. I have called and talked to several people and no one seems to be able to help me.

The two things to try first are renewing your network lease, forgetting the network and if that doesn't work to reset all networks. You might have tried one of these but I'll repeat the steps just to make sure.
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Renew Lease
If that doesn't work then
Settings > Wi-Fi > tap the blue arrow to the right of your network name > Forget this Network
If that doesn't work
Settings > General > Networks > Reset All Networks > then reset your iPhone by
Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart.
I hope one of these will help.

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

I have a Mac OS X Snow Leopard version and my fan keeps coming on. I have been away for a week so it has not been used and yet when I started it up the fan started straight away. Is there anything I can do? Please help! Thanks

Yes, look in Activity Monitor (Applications /Utilities /Activity Monitor.app) and see what it eating up all the %CPU. If anything is over 40%, post the name here to get advice or just kill it straight away with the red 'Quit' button.
If nothing is using up CPU resources, but the fans are going full blast, do an SMC reset. Read the instructions here:
http://support.apple.com/kb/HT3964

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now?

There's a black and white striped glitch on the left side of my screen on my Macbook Air! Its happened before and has been an easy fix, usually just restart or turn off my computer but don't know what else to do. Is there anything I can try now? I wont be able to make it to the Apple store until tomorow and would prefer if there was something I could do that didnt cost money, my computers very new and I really need help.

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
I suggest that you try to repair the phone software using PC Companion..
Before repairing your device you may want to backup your information first. Check out this topic for more information on how to.
How to backup?
If the issue should still remain I think that this needs to be examined and fixed at a repair center. For more information about how to submit your phone for repair and where, contact your local support team.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

I have been interested in how lightroom uses the catalog so was poking around a backup of the catalog. I found it rather concerning that although the database (catalog) is pretty well designed, there is no referential integrity defined or enforced.

I have been interested in how lightroom uses the catalog so was poking around a backup of the catalog. I am a database administrator and I found it rather concerning that although the database (catalog) is pretty well designed, there is no referential integrity defined or enforced. This is non-standard practice and could well be the source of corrupt catalogs I have seen many people complain about. I would strongly recommend the developers modify the catalog and adopt best practices if they want to improve the stability of Lightroom and the catalog.

I would imagine that data integrity is not enforced for performance reasons. In a closed environment like LR where the application has complete control over the data, enforcing data integrity may not be worth the performance hit. Often what is done in an environment like this is to have data integrity on in test environments which would expose data integrity bugs but where the impact of performance is low. In "production" it is then turned off to get as much performance as possible. I would say there are many more complaints about performance than corrupt catalogs. And corrupt catalogs are more likely due to interruptions in writing to the catalog (like crashes, backups or dropbox activity while LR is running, etc). Data integrity would not help in these cases as they are outside the databases control.

HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

HI. When I plug in my charger and use my macbook, I feel some kind of roughness on the body. It feels like some current flowing around it. Need help please.

My 2006 MacBook Pro and my 2011 MacBook Air both do it. It happens because the earth ground stops at the power brick and is not carried through to the case of the machine. It is not dangerous or the machine would not have been UL approved.
Since I operate on battery 99.9999% of the time it doesn't bother me at all.

I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address.

I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect. It says something about the IP address being used by another device. Second wifi network was also created. The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
Wait a full minute
Start the modem, and let it run by itself for 2-3 minutes
Start the next device connected to the modem and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
Check the network

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Hi. The buttons and wheel of my iPod 4th generation do not work. The hold button resets the iPod, and the shuffle shake works. The music plays by shuffling but I can't access albums etc due to the buttons and wheel not working.

Did you restore from backup?
Next would be to restore to factory settings/new iPod since maybe you have some corruption in the backup

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

When I sync my iphone 4S using iTunes it only syncs 8.5GB of music, not the entore library as specified. Is there a capcity default limit of the amount of storage that can be used for music and if so how do I change it?

The only limit is that of the device. No restrictions on how much of it you can use for music. Is part of your music library unchecked?
tt2

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email

I have a iPod touch and i installed it on my other laptop until i had just got another one it says unable to connect to iTunes and i forgot my password and i delete the email and i don't know how i can get my i pod touch to work with my new one email.
I JUST NEED HELP

I would contact Apple under your warranty. I doubt you received a new iPod since Apple's policy is to give you a refurbished iPod.

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

Here's basic troubleshooting for iOS:
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
(Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

I attend St. John's university and use ipad 3 to do most of my work. Since the iOS 6 update I am unable to connect to their network. I can connect to netgear router I have at home but I need the wifi at college as well. Is there anything I can do to fix?

Similar Messages

Maybe you are looking for