I backed my iphone up then i  restored my phone and when i tried to open it  asked if i wanted to hook up with iTunes or iCloud  i hit use back up to iTunes and it will not go anywhere ive plugged it in and replugged it in and i get nothing past that ive

i backed my iphone up then i  restored my phone and when i tried to open it  asked if i wanted to hook up with iTunes or iCloud  i hit use back up to iTunes and it will not go anywhere ive plugged it in and replugged it in and i get nothing past that ive restared my mac and my phone

Try a reset:
1. Hold the Sleep and Home button down (together) for about 10 seconds
2. Until you see the Apple logo (very important)

Similar Messages

  • I updated itunes and when i tried to open it, it says it can't because it's still updating, but its finished updating

    I updated itunes and when i tried to open it, it says it cant because it's still updating, but then in the updates it says it's already finished?

    does that make it easier, it shows that it has already updated, i don't know how i could see if its just the library updating, when i can't open the app.

  • I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!

    I updated my pages app on my ipad and when I tried to open a document it says the file format is invalid. None of my documents are opening pleaser help!!!!

    Try this. It worked for me.
    I discovered the same problem.  I had an older version of Pages on my iPad. After updating it to the latest version all my previous documents created in pages for the iPad were rendered unreadable and a message stated that they were an invalid format.  Why for the life of me would a program that was created by Apple and sense updated not be able to read previous versions...well that's a whole other sad story.  Any way I discovered how to fix it but it would require that you had backup your iPad on a computer and not emptied your trash. If this sounds good than here is how you fix it... And it worked for me.
    These steps will enable you to reinstall a previous version of the Pages app so you can be able to read and edit older documents.
    FIRST: if you did backup your iPad using your computer and did not empty your trash, GOTO the trash and look for PAGES 1.4 (or other number) ipa ( that's the file extension) ie PAGES 1.4 ipa.
    SECOND: move that file out of the trash and onto your desktop.  Once you do this, double click on it and a box will come up stating a newer version has been found and do you want to revert back to older version. ANSWER YES. It will than automatically place and overwrite the older version back into the file on iTunes that contains the rest of your backed up apps.
    THIRD: and this is where it is important that your backup would have to have been on your computer. I'm not sure if backup on the cloud will work.  iCloud backup at your own risk And here's why. Before you restore you will need to remove the latest version of Pages off your iPad by doing the usual : holding down the home button until the apps wiggle and remove by pressing on X on app.  Removing off your iPad will also delete all your documents but if you have a previous backup on your computer those documents will be stored safely on itunes and will return.
    FORTH: plug your iPad into your computer and allow it to sync so iTunes will recognize it. Once iTunes is up and you can see that it recognizes your iPad, GOTO "FILE/DEVICES/RESTORE FROM BACKUP."  ******* DO NOT CLICK ON BACKUP***** click on RESTORE FROM BACKUP. This will reinstall all previous settings and documents that were their when you backuped PLUS the older version of Pages that you placed back from the above steps. Let it run through all the setups ( this could take up to 20 minutes...depending on amount of data and photos and apps).
    FIFTH: Once everything is reinstalled a message will popup on your computer stating "to leave iPad plugged in until iTunes recognizes it again" ( it's basically rebooting itself).  Once done (leave iPad plugged in still) GOTO iPad and follow the steps. IMPORTANT:  iPad will ask you if you want to SET IT UP AS A NEW IPAD, BACK UP FROM THE CLOUD or BACK UP FROM ITUNES.....press SET UP AS NEW IPAD. Follow all of the steps required. Once complete GOTO iTunes on computer, look for "IPAD" plus a little arrow ( should be on upper right corner of iTunes window, click on it ( this will safely disconnect your iPad from iTunes) . Now unplug iPad from computer and go to your iPad and look for the older version of Pages. It should be there along with all your old documents ( readable and editable too).
    Hope this helps. Good luck.

  • I just updated my Mac to the new op system and when I tried to open my Ai it gave me this message, "To open "Adove Illustrator CS5.1 you need to install the legacy java SE 6 runtime."

    I just updated my Mac to the new op system and when I tried to open my Ai it gave me this message, "To open "Adove Illustrator CS5.1 you need to install the legacy java SE 6 runtime." I updated my Java to 8 and it still won't open. I tried to update my Ai to 11...it won't update.

    Steven,
    The right way/order is to update the OP, then reinstall the applications.
    For the Java SE,
    http://support.apple.com/kb/DL1572
    Some have found that the page may turn up blank to start with, so it may be necessary to reload the page.
    Others have found that it may depend on browser. Specifically, a switch from Safari has solved it in one case.

  • I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me "  check with the developer  to make sure

    I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me "  check with the developer  to make sure Keynote (for example) works with this version of Mac OS X "
    iwork was running in my computer just a few moment ago !
    Can anyone tell me what can I do? thanks

    So I re install it from the iwork's disk
    Did you repair permissions and restarted your computer after the installation?  Check SU? 

  • What happened when my phone got water on it, then it died right after? When I tried to charge it, it would just go to the charging screen nd to the turning on screen back and fourth. Now its not turning on at all.

    My phone got water on it from the pool after my lifeproof case failed to work this time. Immediatly after, my phone died. When I charged my Iphone5S it when to the charging screen. After a few minutes, It said it was turning on, but then just went back to the charging screen. Now it isnt turning on at all. What do I do?

    Well, it was a mistake to try to use it while wet. Doing so made the chance of recovery less likely. The best you can do is to dry it thoroughly, then put in in a sealed plastic bag with uncooked rice for 5 days or so. If you can get silica gel that would be even better. At the end of 5 days if it still doesn't work you will have to replace the phone. Apple will do an exchange for $269 if you don't have AppleCare+ or $79 if you do have it.

  • IPod will not start or reset, plugging in makes apple logo flash on and off

    My friend's iPod nano 3G won't turn on. In fact it won't do anything - I can't even reset it. When plugged it, it flashes the apple logo every 1.7 - 1.8 seconds. Suggestions?

    I had the exact same problem about 10 minutes ago. I was freaking out because I'm going on vacation soon and I was getting all worked up because none of my three power sources were charging it and it wasn't even turning on at all.
    I called Support and the automated phone person gave me these steps:
    1. Plug the iPod into the computer
    2. Set it down on a flat surface
    3. Take index fingers and hold menu and center button for about 5 seconds (it actually took me 20 seconds)
    It then connected to the computer and turned on. I don't know why trying to reset it normally didn't work but try this and I hope it helps!!

  • The facebook app on my iphone 3 was running slow so I deleted it and when i tried to install it again it said it was only compatible with IOS 4.3 which i cant get on the iphone 3, is there a way of me getting the facebook app back?

    How can i get the facebook app on my iphone 3 without being able to have IOS 4.3?

    You may have a chance if you still have the app in your iTunes library.

  • Have been using iPhoto for weeks and had it open just an hour ago and when I tried to open again I got a message that I had to upgrade in or to see my library??? after trying to upgrade still getting message. What the heck is going on

    Cannot open iphoto library, getting a message staing I have to upgrade to see my library which I have done four times with no results.  I just had iphoto opened an hour before without a problem and have been using it for weeks before today.  Any ideas as to what is going on?

    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    iPhoto 8 (09) and earlier- run the options indicated
    iPhoto 9 (11) and later- run  Option #4 to rebuild the database
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager (iPhoto 8 or earlier or IPhoto 11 and later) and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the
    File ➙ Rebuild Library (iPhoto 8 or earlier)
    or
    Library ➙ Rebuild Library (iPhoto 9 or later)
    menu option to rebuild the library.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Happy New Year

  • I tried opening a tumblr page from the Safari app on my iPhone 5s and at first it redirected me to the app store and when i tried to open it again it redirected me to a **** site, is this a virus?

    Its happened before and i didnt think anything of it, but i was reading around and i just want to make sure it wasnt a virus.

    Just to clarify some points,
    Advertisers that people link onto their Tumblr blogs have figured out how to launch the app store from the mobile iPhone browser.  
    It's incredibly annoying and to me not secure in the sense that it doesn't ask for permission to open said Ad-link the app store.
    Happened to me in Google Chrome, if I wish to browse a blog, I use the Tumblr app itself to avoid these type of ads.

  • I just downloaded LR to my IMAC ( i am new to apple products) and when I tried to open LR a alert pops up saying "an error occurred when attempting to change modules." I can't get anything to work in LR but Photoshop works fine.

    if anyone has any ideas to why this is happening I would love your help.

    I fixed the problem myself, no response in chat nor phone (1 hour in hold an no answer) here's the link, step # 5 saved me! Here's the link seems to be a very common problem, hope it works for you! Error changing modules | Lightroom

  • I just installed Logic Studio 9.1.1 and when I tried to open, it said  "you can't use this version of the application Logic Pro with this version of Mac OSX. You have Logic pro 9.1.1. Please help!

    can anyone help?

    Hi
    You need Logic v9.1.5 or higher to run with OSX.7 Lion
    http://support.apple.com/kb/HT4807
    CCT

  • I tried downloading Firefox, and when I tried to open the file, it said it was corrupted.

    I downloaded Firefox. When I opened the file though, it said it was corrupted.

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See "Disable virus scanning in Firefox preferences - Windows"
    *http://kb.mozillazine.org/Unable_to_save_or_download_files

  • HT1725 I downloaded the book Sycamore Row last week and when I try to open it on my iPad , i get a message that says: Cannot open "sycamore Row' it is formatted incorrectly, or it is not a format that Ibooks can open. what's up?

    I downloaded the Book Sycamore Row last week on my ipad and when I tried to open it, I got the message that it was formatted incorrectly, or is not a format that ibooks can open? if this is true, how do I get aREFUND?

    You can try deleting the book and reinstall it. There is no reason why the book would be formatted incorrectly - assuming that you purchased this book from the iBooks Store .... And you are talking about the John Grisham novel correct?
    Did you try just closing the iBooks app, restart the iPad and then try again? If you don't know how, this explains how to close an app.
    iOS: Force an app to close - Support - Apple

  • My ipod touch go of and will not work untill i plug it back in to a ac power

    my ipod touch go of and will not work untill i plug it back in to a ac power

    You likely have a hardware problem like a dead battery.  To rule out a software problem try the following in order:
    - Reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backup via iTunes
    - Restore the iPod to factory defaults/new iPod
    If still problem make an appointment at the Genius Bar of an Apple store.

Maybe you are looking for

  • Not able to see latest text in XML Edit Form

    Dear All, I am facing the issue in XML forms. 1) I open an Edit Form and enter the title, Description and News text then save it. when i click on the show form, it's working fine as well able to see title, Description and News text. 2) Again I have e

  • Why does my screen flicker?

    After a couple of hours of use my screen begins to flicker with ghost images of windows flickering on the screen.

  • Cannot open a report I just saved via Save a Dynamic Template

    Hi All, I am on BPC 5.1 SP9, working in Office 2007. The problem is happen sporadically, where I save a report using Save a Dynamic Template.  Then try to open up the report I just saved, and the report does not open.  Sometimes if I resave the repor

  • BPM Examples

    Where I can download Examples for Oracle BPM 11g?

  • Error 1935 on Photoshop Elements 11 installation.

    I'm reinstalling Photoshop Elements 11 and at finishing installation it shows a message: Error 1935 and cancel the installation. What could I do?