I backed up with an external drive, but it only backed up part, do I erase the complete back up and start again?
My system is OS 10.8.5 Memory 4 GB 1333 MHz DDR3, storage available 375 GB out of 500 GB. Yesterday I tried to back up with the Seagate Backup Plus Drive with 1.5 TB using the Time Machine. The backup started, said it would take 3 hours, but ended at 2 hours when the computer went to sleep when I had to leave the desk.When reviewing "About this Mac",it appears under Macintosh HD the amount of GB for Audio 20.53GB, Movie18.66 GB, Photo 4.56 GB, Apps 11.92 GB, Backups zero KB, Other 64.54 GB on the same menu below, appears the External Seagate Back up plus but with Zero KB on Audio, Movies, Photos, Apps, Backups 74.48 GB, zero KB in Other zero KB.I believe that for some reason the back up was not finished complete and only copied 74.48 GB. My question is how do I erase this and start over so I can have a complete first back up with everything. If I did something wrong, I do not get where it was. Thank you so much.
I
o
Capacity: 499
You let the computer go to sleep. When it did then so did the backup drive. The first bit of advice is do not use the software provided with the Seagate backup drive. The second bit of advice is to completely re-partition and format the drive.
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Clone Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
1. Select Disk Utility from the main menu then press the Continue
button.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag it
to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Finally, get a good backup utility to incrementally update the clone.
Suggested Backup Software
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Others may be found at MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Similar Messages
-
I recently purchased a new iMac with an 1 Terrabyte external drive. I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac. I have not downloaded the external drive's software onto my old Mac because of this concern. May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure? Comments? Help?
If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.
-
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
-
I have all my media on an external drive for space. Is there a way I move the library file back to my internal had drive so that Timemachine will keepa backup of the file. Recently my library file became damaged and I lost all my playlists and playcounts and all that good stuff. Thanks for your help.
I never lost any media mind you just the library file that tell iTunes where everything lives.
On this point, you can keep a copy of of the "Itunes Music Library.xml" file, which contains the itunes metadata for your music library (songs & playlists).
Obviously, you would still need the files themselves for this to be of any worth, but if you ever find yourself in the same situation you can use the .xml file to recreate iTunes as it was. Keep in mind that you must import the .xml file into iTunes for this to work, you cannot simply move it via the finder. -
Putting some music files on an external drive, but keeping only one library
I know how to keep two libraries, one on an external drive, and one on my HD...but I'd like to know how to do this:
move some of my music files off of my HD and to my external drive, but maintain the same library (and only one) on my HD. So...when iTunes opens, I see all of the music files in the database, and if I choose a song that physically resides on the HD, it plays it from there, and if I choose one that physically resides on the external drive, it plays it from there. I want to free up space on my HD, but I don't want to have to keep two separate libraries.
Any help is appreciated!It's easy. After you split the music you can add the music from the different locations to the library and it will play them from wherever they're at. The important thing to do is to go into *System Preferences* in iTunes Advanced and uncheck the *Copy files to iTunes Music folder when adding to library* or iTunes will put duplicates in what ever iTunes Music folder you have iTunes pointed at. This folder is only important when you are adding content that you do want copied to the Library, such as from a CD.
I use this for my iTunes music and movies that is stored three different drives. One is a network drive. -
The following scenario:
Mac HD: iPhoto Libary
External HD: all photos which are shown in iPhoto
now I want to copy back the photos from the external HD to the mac hd and I want iPhoto to know the new location of all these photos (couple of 10 thounsands)
How do I do that without reimporting all images again into iPhoto
Thanksdo you have a default "managed" library (the iPhoto preference to "copy imported items to the iPhoto library is in its checked state) or referenced library (you have unchecked that option)
What version of iPhoto?
Do you have Aperature 3.3?
LN -
Happens when seeking to forward something, email something etc. Then it is just one additional tab after another, until I select right top corner to close FireFox.
See:
* [[Firefox keeps opening many tabs or windows]] -
I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library Still syncing with i-Pod but playlists lost , podcasts no longer syncing. How to restore back to original state . I have tried re-installing - with no change
I do the same thing as you do...
My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
There are a couple basic principles to iTunes that I believe you should know.
1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use. -
Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.
Use migration assistant to move your files. http://support.apple.com/kb/HT4889
-
I have lost my Safari app and all the bookmarks that go with it. I have tried to download my back-up on external drive but cannot access it. Tried a start with C key held down but still no access to the back up app.
Have used Superduper app. to back up and checked back-up occasionally to see if all files present and appeared OK.
I had previously started machine using original CD #1 to try and replace Eudora which was acting up. Did not knowingly touch Safari.
Running iMAC System 10.4.11
How can I successfully download from the Maxtor back-up?
IvanFurther info.
I checked the content of my other back-up and found the bookmark Bookmarks.plist in the library under Safari
Dumped the existing copy in the computer and drag-dropped the back up. All bookmarks restored.
Solved the Stickies problem by using Spotlight to find file "stickiesdatabase" and did a drag- drop to replace file. All data restored.
Re Ical data loss. Used Spotlight to find iCal document in Library - Preferences where I found com.apple.iCal.plist in folder.
Got ready to make change but did not immediately remove file. When I returned to Preferences folder to grab above document,
the readable descriptors had been changed to code consisting of some upper case letters and/or single symbols!
So now I cannot tell which is the symbol iCal.plist
Thanks for leading me so far, but how do I find that plist for my calendar? -
I've just used an external drive to back up my Mac with Time Machine. I have Lion, but didn't click and check the "Encrypt Backup Disc". What should I do? Can I delete the external drive and start again, or can I encrypt later?
I guess if stolen or lost it would protect my "stuff", and if I'm travelling would protect my privacy.
You must understand the purpose and implications of encryption before deciding whether to use it.
Encryption locks your data with a password. If you forget that password, the data is lost beyond any chance of recovery. Neither Apple nor anyone else will be able to help you recover that data if you don't know the password.
By the same token, the password must be strong enough to provide the security you want. For example, if you're the potential target of industrial espionage by a government or large corporation, you need the strongest possible password. To create and manage such a password safely is a task in itself, not to be undertaken lightly.
If you're only concerned about casual snooping by someone with no special skill, a weak, easily-remembered password is appropriate.
But regardless of the strength of the password, if you lose it, the data is gone forever.
Another point to remember is that if you encrypt your data on one storage device, you must also encrypt it on all other storage devices that would be accessible to the same attacker. Otherwise the data isn't protected. For example, if you keep your computer and your backup drive in the same room, and the internal drive of the computer is not encrypted, then there's no point in encrypting the backup drive. -
The memory on my MAC is full. It holds 4GB of RAM of which 79GB are photos. I would like to back up my photos to an external drive but just do not know how. I do not wish to use time machine. How do I back up my photo library, then delete them from my MAC to free up that 79GB? Thank you.
Hi
Just to clarify a couple of points in your post.
RAM (memory) is different from hard drive space. You have 4GB of RAM, but that has no bearing on the amount of drive space you have, of which we know that 79GB are photos.
If those photos are in iPhoto, you should be able to move the entire iPhoto Library, from the Pictures folder, to your external hard drive. You can just drag and drop. Do not have iPhoto open while you're doing this. Once it's done, you can double-click on the moved iPhoto Library file to associate it with iPhoto, so that the app remembers where the library is for next time.
One more thing. When you move a file to a different location, and then delete the original, you don't have a backup. You still only have one copy. So if that external drive dies, you will lose all your photos. Time Machine is a very good way to prevent this from happening. You should dedicate a different drive for Time Machine backups.
Matt -
I back up with an external hard drive using time machine. I am trying to reload my iphoto library but it won't let me get back to a date that I need to. How do I do this?
Try Pondini's articles;
http://pondini.org/TM/15.html - scroll down to the pink box for iPhoto restoation.
Also http://pondini.org/TM/15A.html to clarify how to use the timeline. -
I have been backing up iMovie 08 files to my external drive, but for some reason I can't open these files in iMovie. I used drag and drop to copy them.
You really should be doing backups with an actual backup application, especially one that will work automatically, and, if your external HD is large enough, back up your entire system. These can automatically back up only what's changed since the previous backup, and some will keep "archive" copies of things you've changed or deleted, also.
Too many things can go wrong, such as your internal HD failing, and you'll have a major project to reinstall everything.
You already have Time Machine, built-in to OSX. You might want to review the Time Machine Tutorial, and perhaps browse Time Machine - Frequently Asked Questions.
#27 in the second link mentions some alternatives, too. -
My mac mini won't back up to my Seagate external drive but can read the information on it.
Can i back up to it at all? and how do i do it?
SimonI suspect the Seagate is not formatted to be used with the Mac. The correct format would be Mac OS Extended (Journaled), if you just bought the EHD then almost certainly it's formatted to be used with MS Windows machines. This is easy to fix, here are instructions on how to format it:
http://pondini.org/OSX/DU1.html
After formatting Time Machine http://support.apple.com/kb/ht1427 will launch and will begin backing up. The first backup will take some time however after the first backup it will go pretty quickly.
NOTE!!!!!!!!!!!!!!! After formatting all data will be erased, so please if you have data on that move it to the internal HD first and then format. Then once you have backed up you will have a backup copy of the data. Also NEVER EVER use a backup disk to be used to store data. The reason being is if that drive crashes you have not only lost the data you have lost it's backup!!!!!!!!!!!!!!!
Maybe you are looking for
-
Certain websites won't load properly.
The websites will load, although no images will be loaded, no page styles will be loaded and all I can see is text in a bright blue colour. This has only been happening in the past 2 days, and I haven't changed any settings in this time. == URL of af
-
Physical query generation: unneeded dimension tables get joined to the fact
Hi there! The setup is the following: There is a logical fact table which is joined to 7 logical dimensions, it has 4 table sources which correspond to different time dimension levels (all other dimensions are mapped to Detail level). Time dimension
-
Hi, We have to import some namespaces from one XI server to another. when i try importing into the target server i get information that the import was successful but i cannot see the imported objects. When i use the <b>find transports</b> option to v
-
Hi When I click on a row/travel expense of transaction PR05 I need a pop-up that warns if was set the number of miles (field KMGES) for that travel expense. Is there a user-exit/BADI to do it ? Any assistance would be greatly appreciated. Eric.
-
Why is javascript not supported in OAF?
why is that it is not recommended to use Javascript in OA framework? Can we use javascript while extending the controller of a seeded oracle page?