I believe for the year I have not been using photoshop photography but something else so I never really used it or photoshop photography ..can you check for me

now that I just re-newed my photoshop photography ....I have not been using that for some reason I have been using something else. they had changed me a couple
of times last year from one thing to another ...so I never go photoshop photography downloaded. I used the other one very little because I wasn't sure I should...gee
I hope that makes sense.
I need to download photoshop photography.
Sherri nicholas

You need to get the owner's manual for your Ford's bluetooth system to see how to put your system into discovery mode for the iPhone as well as the appropriate steps to take. 
In addition, you should see if the iPhone is supported.

Similar Messages

  • Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.ce.

    Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.

    pklfromarlington wrote:
    Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
    You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us.

  • I have been using Itunes on my HP laptop for 12 months and over the past month have not been able to access the Itunes store or any of the Itunes Help type menu's. When in Itunes I click on the Store icon and the top middle box gets to Half way. Pls help

    I  have been using Itunes on my HP laptop for 12 months and over the past month have not been able to access the Itunes store or any of the Itunes Help type menu's. When in Itunes I click on the Store icon and the top middle box gets to Half way. Pls help

    I had the same tried loads of fixes
    saw this on the community from whatheck
    In windows 7 click on your start menu, go to the accessories, right click on the command icon and choose "run as administrator"
    Once it opens type the following command...
    netsh winsock reset
    Hit enter and it should say something like winsock reset successful now reboot your computer
    IT WORKED....... cleared all the "action2 on the CPU and loads IStore perfectly

  • Software update asks for restart before installing the updates. When restarted password is asked. After the restart the software updates have not been installed. how come?

    Software update ask for a restart before installing the updates. After the restart password is asked. When given the computer is restarted but the software updates have not been installed. How come?

    This article
    http://reviews.cnet.com/8301-13727_7-57400956-263/apple-issues-software-installe r-update/
    explains what might be going on.
    I noted that one of the updates in the list for my wife's iMac was an update to Software Update itself. Probably to fix this very problem. But it wasn't being applied due to Software Update itself not working.
    I considered two solutions.
    (1) Uncheck all the updates except that one update to Software Update. Then after fixing Software Update, apply all the other updates remaining. I did NOT try this approach.
    (2) Download and install the "combo update" for 10.6 -- from here
    http://support.apple.com/kb/dl1399
    I decided to try solution #2. It's a large download, 1 GB, but the whole process took less than 15 minutes. The "combo" update checks and reapplies every update since the beginning of 10.6, so if something is missing or amiss, it gets filled in. It's done manually, by downloading the update, opening the .dmg file, and running the update. When I did this, it fixed the Software Update issue because I then reran Software Update and additional, new updates were found and they all installed fine. Software Update was working as it should. I then ran it a third time and some additional ones were found, also then successfully applied. Finally, no new updates were found by Software Update, which mean everything is up to date.
    I can't be sure if your issue is the same as mine (the bug in the CNET article above) but I'm guessing that the combo update will resolve your issue.

  • The following items have not been completely assigned to shipping group

    I am getting the below error:
    "The following items have not been completely assigned to shipping groups."
    We are using simple checkout with only shipping group applicable for order(HardgoodShippingGroup). It seems during some scenarios, ATG is creating one more shipping group of same type due to which I am getting the above error.
    Any pointers will be helpful

    HI,
    The error is displayed when the withholding tax has been changed in the master record of the vendor or customer. The change has been made after posting the invoice document, then at moment of payment there is a difference between withholding tax information in the invoice and the new withholding tax information changed in the master record.
    In order to prevent the system from the inconsistencies and to avoid the error message, please run report RFWT0010.
    Also, I would like to clarify the functionality of the report RFWT0010. If you have posted a vendor invoice relevant to withholding tax at time of invoice and later you change the master data so this withholding tax type is not longer relevant, this change will not take affect for the already posted invoice, althought you run report RFWT0010. Withholding tax amount at time of invoice is already posted and deducted If you later modify vendor master record and add a new withholding tax
    type relevant at time of payment, you will need to run report RFWT0010 before payment in order to take this withholding tax type into consideration, since it is relevant for payments.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them.

    How do I find all the purchased items on my iPhone? When I try to update the iPhone iOS while connected to my MacBook it says there are purchased items on the phone that have not been transferred to my iTunes library and that I should transfer them before updating.

    Thanks. This seems to have worked easily.

  • I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

    Hi mafiose15,
    Thanks for visiting Apple Support Communities.
    Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    You can find the instructions in this article:
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    All the best,
    Jeremy

  • Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.

    Hi there, I'm thinking of buying both a new MacBook Pro and a small 22 inch LED tv for my kitchen... what would I need to be able to use (wireless of course) the tv as a monitor for the new computer? Apple tv? Airport Express? something else? Thanks.

    Hi a,
    http://www.mctiviausa.com/
    There has been "talk" on and off of Apple TV doing it (and people have done it with a hack), but I haven't really followed it.
    It would be a whole lot cheaper getting an adapter (as needed) and cable and simply pluggin it in when you're in the kitchen.

  • I downloaded/installed a software that came up on the screen and left it until the next morning.  When I went to used the IPad, I have not been able to restart it.  What should I do?

    I downloaded/installed a software that came up on the IPad screen and left itrunning  until the next morning.  When I went to used the IPad next day, I have not been able to restart it.  What should I do?
    thanks,
    hari

    If you mean that it won't boot up, then assuming that the battery isn't empty (it can take about 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • HT4623 on updation to 7.0.6 the instrument is asking for password and I have not been able to remember the pass word

    Dear Sir,
    On updation to 7.0.6 the  i phone (4S) is asking for password, which I am not able to remember. The regular password I have for phone is incorrect, it says. Please help me in this

    Here you go: http://support.apple.com/kb/ht1212.
    Also, is it asking for your Apple ID password, or the device's passcode?

  • HT201272 I have purchased a movie and elected to download later; when I go to the iTunes store, it shows where it is purchased yet when I go to the movie it ask for it to be purchased, will I be charged twice for the movie I have not downloaded yet?

    I purchased the movie "Black Nativity" at midnight and selected to download later; it shows that the movie has been charged in my account for billing, however; I when I go to download the movie, it ask for it to be purchased versus download.  I would like to know if I will be charged again for the movie upon selecting  purchase movie?  I would like some direction as for how to download the movie that I already purchased.

    Clicking on its purchase price again may result in you being charged again. Does the Store > Check For Available Downloads menu option download it
    Or does it show under the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage for downloading

  • HT6114 After the update, I have not been able to use iMessage on Mac.

    I literally got this macbook last week and I was using iMessage perfectly until I had to update it. When I open the app, nothing shows up, and when I go to the file tab, the cursor becomes the loading colorful circle.

    HI,
    Can you go to the Apple Menu in the Menu Bar > About this Mac and then click twice on the line that reads the current OS ?
    This will change to the Build Number (another OS counting method) and then to the Serial Number.
    At OS X 10.8.2 (in Mountain Lion) the Serial Number started to be used in creating an Auth Token for both Messages and FaceTime.
    One issue is that (after the initial issues) people have been updating from Lion to Mavericks, bypassing this "threshold" as it were.
    However someone has also reported that Mavericks seems to deny access to reading the Serial Number from the logic/Mother board and creating the issue over again.
    They reported that taking it to the Store and having it "flashed" to the board is successful.
    (they had been in contact with Apple and engineers were looking at various Logs that "proved" it was missing).
    There are some utilities available On line (which I will not recommend) that do allow you to attempt this once.
    It seems the board only allows this once.
    However the info in the other thread seemed to suggest otherwise.
    If there is no Store near you try an Apple Authorise Service Provider (AASP)
    9:08 pm      Monday; March 24, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Can you check for data in one table or another but not both in one query?

    I have a situation where I need to link two tables together but the data may be in another (archive) table or different records are in both but I want the latest record from either table:
    ACCOUNT
    AccountID     Name   
    123               John Doe
    124               Jane Donaldson           
    125               Harold Douglas    
    MARKETER_ACCOUNT
    Key     AccountID     Marketer    StartDate     EndDate
    1001     123               10526          8/3/2008     9/27/2009
    1017     123               10987          9/28/2009     12/31/4712    (high date ~ which means currently with this marketer)
    1023     124               10541          12/03/2010     12/31/4712
    ARCHIVE
    Key     AccountID     Marketer    StartDate     EndDate
    1015     124               10526          8/3/2008     12/02/2010
    1033     125               10987         01/01/2011     01/31/2012  
    So my query needs to return the following:
    123     John Doe                        10526     8/3/2008     9/27/2009
    124     Jane Donaldson             10541     12/03/2010     12/31/4712     (this is the later of the two records for this account between archive and marketer_account tables)
    125     Harold Douglas               10987          01/01/2011     01/31/2012     (he is only in archive, so get this record)
    I'm unsure how to proceed in one query.  Note that I am reading in possibly multiple accounts at a time and returning a collection back to .net
    open CURSOR_ACCT
              select AccountID
              from
                     ACCOUNT A,
                     MARKETER_ACCOUNT M,
                     ARCHIVE R
               where A.AccountID = nvl((select max(M.EndDate) from Marketer_account M2
                                                    where M2.AccountID = A.AccountID),
                                                      (select max(R.EndDate) from Archive R2
                                                    where R2.AccountID = A.AccountID)
                   and upper(A.Name) like parameter || '%'
    <can you do a NVL like this?   probably not...   I want to be able to get the MAX record for that account off the MarketerACcount table OR the max record for that account off the Archive table, but not both>
    (parameter could be "DO", so I return all names starting with DO...)

    if I understand your description I would assume that for John Dow we would expect the second row from marketer_account  ("high date ~ which means currently with this marketer"). Here is a solution with analytic functions:
    drop table account;
    drop table marketer_account;
    drop table marketer_account_archive;
    create table account (
        id number
      , name varchar2(20)
    insert into account values (123, 'John Doe');
    insert into account values (124, 'Jane Donaldson');
    insert into account values (125, 'Harold Douglas');
    create table marketer_account (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account values (1001, 123, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('27.09.2009', 'dd.mm.yyyy'));
    insert into marketer_account values (1017, 123, 10987, to_date('28.09.2009', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    insert into marketer_account values (1023, 124, 10541, to_date('03.12.2010', 'dd.mm.yyyy'), to_date('31.12.4712', 'dd.mm.yyyy'));
    create table marketer_account_archive (
        key number
      , AccountId number
      , MktKey number
      , FromDt date
      , ToDate date
    insert into marketer_account_archive values (1015, 124, 10526, to_date('03.08.2008', 'dd.mm.yyyy'), to_date('02.12.2010', 'dd.mm.yyyy'));
    insert into marketer_account_archive values (1033, 125, 10987, to_date('01.01.2011', 'dd.mm.yyyy'), to_date('31.01.2012', 'dd.mm.yyyy'));
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
         , max(FromDt) over(partition by AccountId) max_FromDt
      from marketer_account_archive;
    with
    basedata as (
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account
    union all
    select key, AccountId, MktKey, FromDt, ToDate
      from marketer_account_archive
    basedata_with_max_intervals as (
    select key, AccountId, MktKey, FromDt, ToDate
         , row_number() over(partition by AccountId order by FromDt desc) FromDt_Rank
      from basedata
    filtered_basedata as (
    select key, AccountId, MktKey, FromDt, ToDate from basedata_with_max_intervals where FromDt_Rank = 1
    select a.id
         , a.name
         , b.MktKey
         , b.FromDt
         , b.ToDate
      from account a
      join filtered_basedata b
        on (a.id = b.AccountId)
    ID NAME                     MKTKEY FROMDT     TODATE
    123 John Doe                  10987 28.09.2009 31.12.4712
    124 Jane Donaldson            10541 03.12.2010 31.12.4712
    125 Harold Douglas            10987 01.01.2011 31.01.2012
    If your tables are big it could be necessary to do the filtering (according to your condition) in an early step (the first CTE).
    Regards
    Martin

  • HT204266 For months now I have not been able to make a purchase in the app store.  It will ask me to answer my security questions , but will not accept the answers.  I have raised the issues a number of times with customer service, but it has been no help

    How can I reset my security questions to be able to access my account and purchases?
    I have been told it is not possible, could this be true?

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

  • HT1222 Since I have installed the iOS 6 I have not been able to get my Internet / wi fi connection freely ..... What can be done..... Please help

    Need to know why I am not getting Internet / wi fi connection frequently and smoothly as I use to before installing Iso 6 ... Can I change back to the old system or do something about it. Thanks ...please help

    You can't downgrade the iOS.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for