I believe this question has been asked, but I missed it.

How do I transfer my revel picture to Light Room?
Mary Scheele

Mary-
The lightroom plugin allows publishing directly to Revel, but there is not a direct way to get photos from Revel to Lightroom currently. You can export photos from Revel to your computer and then open them in Lightroom, but can't open them in Lightroom directly out of Revel. Some users have asked for a two way interface, so we have communicated this with product management for consideration.
Pattie

Similar Messages

I noticed this question has been asked a lot, but I still do not understand. How do I get my ALL of my iTunes music onto iCloud. I have already subscribed to match and increased my icloud storage. Only some of my music is in the cloud, not on iphone

I have noticed that this question has been asked a lot, but I am still not understanding. How do I move ALL of my music on iTunes into iCloud? I have subscribed to match and increased my iCloud storage. Only part of my music is in the Cloud and not on my iPhone.

Hello, Crafter Lady.
Thank you for visiting Apple Support Communities.
You may find this article helpful when troubleshooting issues with iTunes Match.
iTunes Store: Troubleshooting iTunes Match
http://support.apple.com/kb/ts4054
Cheers,
Jason H.

I know this question has been asked before a long time ago but NO Answer

Hello, This question has been asked before but no answer so I thought I'd ask it again since it's been a few years..
How can I replace the folder icons in a Picture Library with a thumbnail of a photo in a folder? I know I can do something very similar in the 'getting started' list by using a 'Promoted Links List' does the picture library
use the same type of methold? I'd like to see a thumbnail of one of the photos instead of a yellow file folder.
Thank you,
Joan

I'm a bit of fan of: lapointes add-ons.
If you have these installed (free of charge) it is just a powershell command. (set-spolist)
check: http://www.falchionconsulting.com/PowerShellViewer/Default.aspx?Version=SPO&Cmdlet=Set-SPOList
ImageUrl
False
String
Sets a value that specifies the URI for the icon of the List.
Good luck!

I know this question has been asked a million times before but my pc has crashed and iTunes has now been synced to my daughters iPod and will not recognize my account

Since the family computer crashed and been restored to factory settings my daughter has downloaded iTunes and set it up with her iPod. I cannot sync my iPad with this without losing all my apps ect? How do I set iTunes to two different accounts?
Mark

If this question has been asked a million times before, when you search, you should get 1 million answers

BBC Radio on iTunes - Sorry, I know this question has been asked a lot

Hi all,
I'm having trouble searching the forum for an answer, so I'll pose the question which I'm sure has been answered many times in the past.
The BBC's audio streams are fantastic. Now that I've installed the "Remote" on my iPod Touch, I'm keen to listen to their streams in iTunes rather than the BBC iPlayer.
Is it possible to add any of their streams to iTunes? At minimum, the Worldservice?
Steve

I have also wondered about this. Want to hear the world service without opening RealPlayer or Safari. Tried to open a stream with the adress from RealPlayer, but that didn't work. Maybe iTunes doesn't support RealAudio? Also tried the adresse you get when opening a stream from BBC Radio's homepage, but that didn't work either. This stream should be in windows media format. I have got Flip for Mac installed and updated. Any ideas out there?

HT204371 Hallo - I'm sure this question has been asked many times before but still can't get my head around it

I have an 'n' version Airport Express (1st Generation) and want to use it to AirPlay music from iTunes on my Mac to my HiFi in the next room. That's all I want to use it for. Have set it up to join an existing wireless network. However it will only work with an ethernet cable connected to the router. Loses the green light when cable is unplugged. As the hifi is in the next room I want it to work wirelessly, otherwise there'll be cables everywhere (as at present - ugh!) What do I have to do? What setting needs to be changed. Thanks.

Well, I'd all but given up and decided I'd live with it ethernet connected with wires draped everywhere...then I had another look this moring and found this:
http://support.apple.com/kb/TS2098
I have a non Apple, older (Thompson) router. After a factory reset, and when going through the 'join existing network' procedure when sked for the WEP password you need to put a $ before the password...and hay presto...the set up completes and...AirPlay works! I suspect many might not have discovered this page of support information and will have been as frustrated as me for many many hours!

I'm sure this question has been asked before, i bought a iPad 2 from my friend and i hadn't used it for nearly 5 months then i tried to activate it and it says that there a iCloud account linked to it but my friend has NEVER used iCloud. What can i

I just want to know how get rid of a iCloud account from a ipad2 that i purchased off my friend. My friend has NEVER used iCloud so i don't know how this iCloud account got linked to this ipad2 and i don't know how to get rid of it? Please help.

If your friend is the iPhone’s original owner, tell them to take the device and its original purchase receipt to a physical Apple Store.
If not, but you're able to contact the person who set the lock, send them this link and tell them to follow its instructions.
If neither of the above applies, you can't activate the device but may be able to get it refunded. Apple won't remove the lock for anyone other than the original owner(assuming they're alive.)
(116323)

I know this question has been asked a million times, but......

When is Lion going to be released?

Hello again:
Since this thread is useless, I'll violate the TOU myself and respond.
Apparently we share a common language. In Wisconsin and, I suspect, much of the English-speaking world……..
Inquisitive fits your original post.
Speculation would be any response that your "inquisitiveness" generated.
My post was a message to anyone else reading your "inquisitive" post that a response would violate the TOU. Apple takes the TOU quite seriously - as many have found out in the past.
Barry

I know this question has been asked a lot

But I can't find an answer to my specific computers. I have an iMac 8,1 and the first Unibody Macbook 5,1.... the iMac model: 8,1 Supports external display in dual display and mirroring modes. VGA output supported by optional Apple DVI-to-VGA adapter. However, I have went to the apple store and they stated my certain macbook can not be used as a second display for the imac nor the imac being used as a second for the macbook. The macbook model: 5,1 Supports external display in dual display and mirroring modes. DVI, Dual-Link DVI, and VGA supported by optional Apple adapters. So how to get it to work???? I don't feel like spending $900 for a display when I feel these computers are capable by themselves, and don't tell me I paid over $3,500 to not have this feature?
This is the early 2008 iMac and the late 2008 macbook
Again the models are
iMac 8,1 2.8GHZ 24"
Macbook 5,1 2GHZ 13" Unibody

So how to get it to work?
Use ScreenRecycler and a network connection. Except for the current 27-inch iMac, no Mac provides video in capability the way a standalone monitor does.
(52178)

How Do I re-install QT PRO? Sorry if this question has been asked zillions

My existing QT Pro had a buffering issue and was corrupted, so I un-intstalled it. I want to re-install, but I can only find how to download new QT Pro and pay again. I have my registration #, etc. How do I do this? Thank you.

Same trouble myself a time ago.
Launch Quicktime. Under the QuickTime Player menu, enter your registration number in the first pane of QuickTime Preferences. Not "Preferences," but QuickTime Preferences.
Hope this gets you up and running.
Ted.

I apologize if this is a repeat -- I can't find if my question has been posted, but all traffic received through SAFARI (but not FIREFOX) quoting prices has the latter in EUROS, not US Dollars. Figures in my outgoing Email appear to the recepient in Dolla

I apologize if this is a repeat, but I can't tell if my question has been posted.
For the past several weeks, all incoming traffic via Safari 5.0.5, but not Firefox,containing cost/price figures appear in Euros, not US Dollars. My responses, however, are received correctly in US Dollars. Wierd, and irritating. Any ideas?

To answer the post title FireFox save all downloads automatically in the download folder, which you can find in the Documents folder. If you want to choose where to save your downloads go to tools>options>check always ask me where to save files.
Secondly, I am assuming you have IE 8 installed as this is the only version that supports this fix that is currently not in beta. Go to control panel>internet options>advanced tab and reset the settings at the bottom. This may or may not fix the problem but it is a good first step.

Maybe this question has been found already, but I have yet to find the answer. How can I restore my bookmarks after it has been deleted from my 'bookmarkbackups' folder?

So it has been a couple months now since I last cleaned up my bookmarks toolbar. And I could remember a couple of bookmarks tabs I wish I did not delete. I found some articles saying I could try restoring previous versions of my bookmarks from the dates of recent system restore points. But the earliest date I found was of only last week's. I've checked everywhere in my Firefox profile for anything that I could restore to date back into that time, but they too only tracked back as early as last week. I believe the automatic backups Firefox had made during that time has now long been deleted from the system in order to make room for my most current ones. How am I going to be able to retrieve those bookmarks when their aren't any backups available now to restore from?

If you do not have backups of your bookmarks, either in the bookmarkbackups folder or saved elsewhere, then you can't restore your bookmarks.
For future prevention: http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

BT believe my broadband has been installed but it ...

Hi all,
I'm in a frustrating situation at the moment where BT believe that my Infinity 2 Broadband has been installed when it has not been installed. I am currently being charged for Broadband and am unable to book an appointment for anyne to fit my Broadband. Furthermore, the call centre and online chat people do not appear to know anything about Infinity and the white fibre modem. This is the story so far:
I moved house on the 20th Febraury and booked an appointment a week later to have my broadband installed. I get my appointment for the 5th March for the install. It's a little bit of a wait but I'm fine to hold out for the 8 days.
On the 5th March, the BB engineer arrives, he's clearly one of the contractors I've heard so much about! I'm not fussed, I see no reason why this should be anything other than a routine job. After about 30 minutes of firendly chat and a few trips by the engineer to the curb and back, he informs me that the phone line is not working. In his words, "Your line is activated on the system and I can see it in the cabinet in the street, but it's not coming in to the flat, at least not through this socket.". "Can you fix it?" I ask naively. "Nah, I only deal with the broadband install, I can't touch the line!". I'm frustrated but I understand it's not his fault. Perhaps my disappointment was evident and shared by the contractor as he informed me, "I'm as annoyed as you are, I don't get paid unless I can mark the job as complete!". In a brief conversation following this, I found out the company he worked for was "Quinn" something and that he would raise the fault for me on the line so that someone could come and fix that.
Although frustrated at this point, I had no problems with the contractor, he seemed fair and his explanation of both the problem and his inability to resolve it seemed fair.
It turned out he did not raise the fault so I raised the fault on the line myself through the website when I returned to the office. The very next day, BT sent me a text saying that my Broadband had been activated. I log in to the website and see the fault I have raised on the line next to a bill for £20 - my first month's broadband charge. My assumption at this point is that the contractor either deliberately closed the job he had for my broadband as completed or accidentally did so (I believe a responsible contractor would have corrected the latter mistake).
So the engineer to fix my line was due on the 7th before 1pm. I take another half day off work and sit and wait. I hear literally nothing from BT all day and by 14:30 I give up and go to work. I call the team in India to reschedule and they assure me this time that he will come on the 8th before 1pm. To avoid me waiting in and missing more work, the lady on the phone says she will inform the engineer to call me 30 minutes before he arrives at my house so I can make my way there in time (I work 20 minutes away). On the 8th, in the middle of a meeting, I get a call from a BT engineer asking me how to operate the gates to the flats. "Oh. You're already there?" I ask. "Yeah, are you not in?" he replies. "No, I was told you would call me 30 minutes before so I could get back there to let you in!". "Well I can't wait 30 minutes mate, I'll just have to sit here for 15 and then mark the job as unable to complete.". Somehow, we mutually agree that if I ca get home in 20 minutes, the engineer will wait for me to let him in. Luckily I make it inside 15 anyway and let him in.
This guy is from OpenReach and I have to say, despite what might have been a bad start, he was nothing but professional in doing his job and explaining the problems as he went along. It may have taken around an hour, but eventually my phone line was up and running. Regardless of my experience with the Broadband guy, this is the level of service I would expect when I have a problem with a service provider.
So now here I am. It's the 11th following a weekend where I failed to visit my mother for Mother's Day whilst simulataneously using it as an excuse to get nothing done at home, including calling BT. I have just made that call where I soent 5 minutes struggling to communicate with one woman who decided that my Broadband had been installed and maybe I just needed help plugging it in. I'm seeing the funny side and after explianing several times what has happened, I get put through to "Level 2" (sounds like I'm playing a game!). The Level 2 person has a faulty headset which means that the most important word in each sentence is completely replaced with white noise. I feel a little embarrassed that I have to ask her to repeat everything. She then seems to identify the problem and apologises multiple times for the errors on BT's part as she types furiously on her keyboard (I'm not sure if it was furious but I can hear it through the dodgy headset). For some reason I'm transferred to my mobile where she calls me (it's convenient and I'm sure the reason was explianed behind the white noise somewhere) and after a wait littered with apologies, I am asked to hold on while she just...
...and then there's silence. Silence broken only with me saying "Hello?" multiple times in many different ways. After about 90 seconds, I explain that I can't hear anything (in the hope someone is hearing but not able to speak back) and that I'm going to hang up.
And that's when I decided to write this post, whilst waiting for the call back. It hasn't come. I'll keep you all posted but in the meantime it would be nice to know where I can send a letter to voice my frustration and also how I can get my money back for the Broadband that I am still unable to use.
Thanks!
Dan

If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to help you.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

This question has been on my mind for quite some time...

I've been an avid user of iTunes for nearly a year now, and I used it even before I purchased my new Mac.
This has been bugging me like a piece of gum stuck to my shoe, so I have to ask: Sporatically and erratically, when I drag albums, artists, or songs to a specific playlists, iTunes will automatically start playing the first song from the dragged artist/album or the song itself. I HATE this. I don't know why it happens so randomly, too. I can add/delete all I want for hours on end and it won't happen - other times, it happens nearly everytime I add a new album/artist/song to a playlist. It wouldn't be annoying, except that I'm always listening to some other music on iTunes at the time, and thus when iTunes starts playing another song from my dragged selection, it HIGHLY annoys me.
I've looked in the preferences window and can't find an option of any sort that can help me. What do I want, or rather, don't want? I don't want iTunes to start playing a song from a dragged selection when I add it to a playlist. I want it to avoid that. Am I out of luck as far as controlling this erratic beast? I've only used Macs since June of this year and I do not remember this happening with my horrible Windows version of iTunes at all.
Please help.

What version of iTunes? In 6.0.1, you can go to iTunes/preferences/advanced/importing and uncheck "play songs while importing". It will be slightly different with earlier versions of iTunes, but the wording should be similar enough.

I realise this has been asked but please h

Hi, I know this is in the FAQ and only a few posts below this thread as well but I still need help. I lost my installation CD for my zen microphoto before I reformatted my computer so when I went to install the necessary materials I couldn't. So... I went to creative and to the following link
http://www.nomadworld.com/language.a...port/downloads
then to the microphoto page. There are no drivers on the page and there also isn't the zen media explorer that I used before to import onto the player. Am I missing something here? What should I do?

Thank you. Your reply was very helpfull and now I can put things on and take off of my player with WMP. I do have one more question though. I have several playlists already on my player (some I made some are the players own like 'most listended to') but they do not appear in WMP nor when I explore the device. When the player is on though they do play. Basically, how can I change/edit/create playlists now?

I believe this question has been asked, but I missed it.

Similar Messages

Maybe you are looking for