I book upgrade

How can I upgrade my i book from OS 10,1.2 to 10.3.9.Have just been given 30 gb ipod and that is min reqd.

Hi, amundo. Welcome to Apple Discussions.
Also, please be aware that it takes 256 MB to install OS X 10.4.
Be certain that you have enough available space on your hard drive to do it.
http://docs.info.apple.com/article.html?artnum=106163

Similar Messages

MSI S20 ultra book upgrade

I heard msi s20 have 2 ram slot and 2 SSD slot, is this true?
I wanted to upgrade it. hope someone can verify this for me.

Quote from: koolken on 19-April-14, 04:53:10
I have the S20 with the i7 processor. There isn't a 2.5 SDD bay, but there is room for a 2.5 SSD. The only problem would be is that the drive connector is for a mSATA, and not a standard SATA connector. Also note that the S20 only has room for a half size mSATA. The largest half size mSATA I could fine was a 128GB. The reason for the half size mSATA is because the battery gets in the way, leaving only enough space for a half size card. I was able to put in a full size mSATA by using a mini-PCIe extender cable with adapter. Mini-PCIe uses the same pins (just a different protocol) as mSATA. It worked perfectly, but requires disassembling the laptop almost completely.
Just my thoughs. I hope this is helpful
Please, help me. I need more info for this. Can you make foto, or give me, please, links
Thank you!!!

Upgrading Weblogic server to move from jdeveloper 11.1.1.1.0 to 11.1.1.4.0

Hello, I would need clear direction to what I should do to upgrade my target weblogic server when I move my development environment from jdeveloper 11.1.1.1.0 to 11.1.1.4.0
Initial ADF project was developed with jdeveloper 11.1.1.1.0 and deployed on a WLS 10.3.0
Now we are upgrating the application and we decided to move the project to jdeveloper 11.1.1.1.4
I need help on what I should upgrade on the target WLS server.
How do we move from WLS 10.3.0 to WLS 10.3.4?
Is it a reinstall or a upgrade? How do we upgrade?
And what about just upgrating the ADF run time? Is it the way to go?
At following link we see
http://www.oracle.com/technetwork/developer-tools/adf/downloads/index.html there is a Application development runtime is it the runtime that we install on the server or not?
I am confused if the ADF run time is tied with the WLS version or not, can someone give me a clear description of what is the ADF Runtime and how we upgrade it on the servers? Any Oracle documentation describing this process that I can provide to my server administrators?
At the end what is the best practice to upgrade the WLS servers when you would lilke to move like me from an older version of jdeveloper to a newer version. is there an Oracle document describing the steps to be done?
Thanks

I'll echo Timo's question - why upgrade to 11.1.1.4 and not to the latest and greatest 11.1.1.6 (released yesterday)?
Upgrading to an older version basically means that you are setting yourself for another upgrade later on - so why not enjoy all the bug fixes and new features of the newer versions?
In terms of the upgrade process - if you look in the documentation tab of JDeveloper you'll see the book "Upgrade Guide for Oracle SOA Suite, WebCenter, and ADF" which gives the steps you can follow.
For 11.1.1.6 the book is here:
http://docs.oracle.com/cd/E23943_01/upgrade.1111/e10127/toc.htm
In the same documentation tab you'll find the certification matrix that explains which ADF version works with which WLS version:
http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html

Cannot find symbol on new Book()

hi, i have problem with NetBean error when create program below:
class library{
main(){
Library xxx = new Library();
xxx.fillMe();
private void fillMe(){
libCat = new Cat(10);
// populate Cat
System.out.print("something");
Book book1 = new Book("something2");
libCat.addBook(book1);...
libCat.printCatalogue();
the error:
symbol : constructor Book(java.lang.String,java.lang.String,java.lang.String)
location: class Book
it runderlining with the above error with underline red line, can anyone help please?
thanks
chilli

yeh, i did, i did on the Book.java class:
Book libbook = new Book();
libbook.printDetails();
but error still:
please see:|
xxxxxxxxxxxxxxxxxxxxxxx
init:
deps-jar:
Compiling 1 source file to E:\NetBeans java projects\MyProject06\build\classes
E:\NetBeans java projects\MyProject06\src\Library.java:51: cannot find symbol
symbol : constructor Book(java.lang.String,java.lang.String,int)
location: class Book
Book book1 = new Book("Java Essential , "Cay Horstmann", 2003);
E:\NetBeans java projects\MyProject06\src\Library.java:54: cannot find symbol
symbol : constructor Book(java.lang.String,java.lang.String,int)
location: class Book
Book book2 = new Book("Net Hacking ", "James Bond", 2001);
E:\NetBeans java projects\MyProject06\src\Library.java:57: cannot find symbol
symbol : constructor Book(java.lang.String,java.lang.String,int)
location: class Book
Book book3 = new Book("Internet and Networking Unleashed", "Tom Cruise", 2002);
E:\NetBeans java projects\MyProject06\src\Library.java:60: cannot find symbol
symbol : constructor Book(java.lang.String,java.lang.String,int)
location: class Book
Book book4 = new Book("Windows NT Server 4 Explorer", "Jackie Gibson", 1998);
E:\NetBeans java projects\MyProject06\src\Library.java:64: cannot find symbol
symbol : constructor Book(java.lang.String,java.lang.String,int)
location: class Book
Book book5 = new Book("Upgrade and Build Your Own PC", "Wesley Snipes", 2003);
5 errors
BUILD FAILED (total time: 1 minute 26 seconds)
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
thanks in advance

Migrating, Fresh Install, or Best Approach?

I'm currently running Mountain Lion on this late 2008 MBP. For the past couple years it's had issues where it goes off into never never land and I believe it's from corrupt system files or something. Sometimes it's different programs that cause the issue like if I open Preview, Text-Edit, etc. The computer will work fine unless I open one of them and then it just starts running totally sluggish and getting stuck. Closing the programs doesn't fix the issue. I'll have to restart and avoid those programs as long as I can. I've also noticed normal image files of mine and files I created going corrupt at times for no reason. I've tried every thing in the book, upgraded operating systems, run repairs, purchased new HD etc. Nothing fixes it.
So, I'm finally upgrading to Yosemite and figure now it's the time... once and for all... to fix the issue by doing the first complete erase of the OS and fresh install after all these years. So right now I'm cloning the drive to an external via Data Rescue 3. Once that is complete then what is the best approach here to be sure none of any corrupt system code or anything makes it over so that it's like I have a brand new MBP (just that's really old...LOL)?
I'm thinking the migration option from the external backup clone I'm making would be best but with that I'm not sure how it installs the old programs if you chose to have it copy the apps over. Won't it copy the apps code from this install? If that's the case it sounds like migration might be a bad choice for me as it's risking possible corrupt code back in? At the same time I want my settings, images, passwords, email, iPhone backups, music, etc. So won't it be really difficult if I don't use the migration choice or is it simple to copy that stuff over? Please advise on the best and easiest way for me to get what I need onto this computer but without letting any possible old corrupt code in...
Thanks!

fluxxy1245 wrote:
hi
I recently purchased the latest mountain Lion.
i was wondering what was the best thing to do.
A complete fresh install
or just upgrading from the previous OSX Lion.
I have 3 macs :
- iMac 27" (2009)
- Mac Mini (2010)
- MacBook Pro 13" (2011)
The 3 of them came with with Snow Leopard.
And I did an upgrade to Lion, shortly after it was relased.
If we upgrade :
- does leave unnecessary files
- is there a difference in speed and hard-disk space
or does it manage it all very well
Thanks for the info
maybe some links would be welcome that give an in-depth explanation about that
There is some house-keeping that you need to do before/after upgrading to Mountain Lion.
For installed, third-party applications (and device drivers where indicated), does the vendor offer latest OS X Mountain Lion support. Drivers that worked in Snow Leopard or Lion, may not work well in Mountain Lion without upgrades.
You may have to re-install some third-party applications that have system dependencies that have changed in Mountain Lion.
You may have to update your Printer preferences if printers do not work after the upgrade.
You should count on a minimum of 4GB of memory (8GB is better) in each Mac.
Although the upgrade process will not touch /Users, it is sound due diligence to backup user data on all these Macs beforehand.
Upgrading is simpler, multiple Mountain Lion downloads not withstanding. If these Macs have been through prior OS X updates, they may not operate as fast as a full, clean install would deliver. If you want to do a full, clean install, download the free Lion Diskmaker. It will automatically build a bootable, USB installer for Mountain Lion from your first ML purchase and download. I used it to make a clean install on my SSD. Works perfectly.

Disc Utility doesn't see new hard drive

Hi Everyone.
I've just replaced my old 20gig IBM Travelstar 4200rpm with a new Seagate Momentus 7200.1 80gig hard drive. I used Carbon Copy to back a duplicate of the info on the Travelsdtar to an extrenal fireiwre drive. I can boot up from the fireiwre drive. When I go to format the new Seagate drive, disc utility doesn't see it. I even booted from a tiger install disc and tried it's disc utiltiy. Still couldn't see it. Before I go and reinsert the old Travelstar, maybe someone can tell me what I am doing wrong? thanks Andrew
PS. The Seagate had jumpers on it. The Travelstar didn't, so I took off the jumpers on the Seagate before I installed it..
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Hi Eww. You are exactly right. What was I thinking (not). I reopened the laptop and had a good poke around. The Seagate comes with a jumper diagram on the case. I was correct to assume that no jumpers means " master". Why I didn't see that last night only wine will know.
It's not safe to surmise, because one drive has no
jumpers in place or jumpers in a particular
arrangement, that any other drive with which you
replace it should be jumpered the same way. Jumper
configurations may vary considerably from one drive
model and manufacturer to another.
If you find that the drive is already correctly
jumpered (with no jumpers in place), then the problem
may be a poor connection .
Yes that was it. In my haste to get the thing going I only connected one row of the pins. Problem solved. It's purring along as I type. For the record it is much quieter than the Travelstar. Thanks for everybody's replies.
Ti G4 Powerbook DVI Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz
Ti G4 Powerbook DVI and Intel Imac Mac OS X (10.4.9) Ti Book upgraded from 400Mhz to 667Mhz

Stopping unwanted RSS feeds

I recently had my mail and address book upgraded by the Genius bar staff and I cannot stop two feeds that appeared in the left hand column of mail HOT APPLE NEWS & BBC. In Mail Preferences> RSS the default is safari & manual and in Rules there is no RSS rules to delete. Any clues? they just keep coming and its getting annoying. I have deleted all the RSS feeds in bookmarks in safari to no avail.
Is it best to reselect then delete?

Amen!! I don't want to receive these either, but can't find a way to turn RSS off in Mail.

I upgraded to Snow Leopard, made a change to Address Book that I need to correct, tried to use Time Machine to find the prior version and it keeps pulling up the later ones info. How do I use Time Machine to restore Address Book from a few hours ago?

This morning, I upgraded to Snow Leopard from v10.5.8. Then, I exported 11 contacts from our old Now Contact database, intending to import that info into Address Book. It was an experiment, as we have 1199 contacts in 20+ categories and want to eventually get them into Bento from Address Book. The export automatically created a file called Export.vcf on the desktop, after I highlighted the 11 contacts. I tried to look at the info, but when clicked it opens Address Book, which then simply asked if I wanted to import the 11 contacts to it. I clicked yes. Then in checking Address Book 7, not 11 contacts appeared. I clicked on "All Contacts" and there were 1630. We only have 1199, so where did the extra 400+ come from? Since I had already clicked twice on the Address Book window, I couldn't undo the import. So I thought 'Ok, I'll trash Address Book and go to Time Machine, find Address Book, go to right after the upgrade to SL, hit Restore and bingo. Nope. I keep getting the post-import info, not pre. Con someone direct me to a solution? I want to get rid of the import contacts plus the extra 300 or so ( I already had a hundred or so in several categories)? Then, I need to figure out (1) why ALL the old records were exported from Now Contact, (2) where they were hiding in that .vcf file when Address Book recognized that I only wanted to export 11, (3) why Address Book showed only 7 imports in the "Last Import" group, but showed ALL my contacts in the "All Contact" group, even though they should nearly all have been safely untouched in the Now Contact DBase file. PS, I am not especially computer savvy. Thanks for any enlightenment.

Booting From Snow Leopard Installer Disc
1. Insert Snow Leopard Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple logo appears.
5. Wait for installer to finish loading.
Drive Preparation and Installation
1. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
7. After formatting is complete quit DU and return to the installer. Install Snow Leopard.

I have Logic on my iMac and want to install it on my new mac book but my mac book doesn't have a dvd drive. I tried to download the upgrade but it looks for an older version. How do I get Logic on the Mac book ?

I would like to install logic on my new mac book but there is no dvd drive. I tried to downlaod the upgrade but that didn't work. How do I download it for the first time?
Thanks!

You can only use the App Store version to reinstall on your new Mac if you bought Logic via the App Store in the first place.... and then it will appear under the Purchases tab in the Mac App Store App so long as you are signed in using the same Apple ID you used to purchase Logic via the App store in the first place.
If you bought the DVD edition of Logic Studio then you must initially install using those original DVDs to begin with and then update to the latest version of your version of Logic via software updates.
No DVD drive? Buy an external one.. Amazon do a very cheap basic one that works well..
or...
Use Remote Disk if you still have your older Mac which has a built in DVD drive...
http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US

Problems after upgrading to Adobe Digital Editions 4.0.3 and borrowing books from a library??

After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook. I get the message 'This book has been returned. Loan not on record.' It worked fine before the upgr

After upgrading to Adobe Digital Editions 4.0.3, I am having problems downloading borrowed library books to my nook. I get the message 'This book has been returned. Loan not on record.' It worked fine before the upgr

Running mountain lion os 10.8.5 on mac book pro mid 2012 build. If I upgrade to Mavericks will MS Office programs still work?

I am running mountain lion os 10.8.5 on mac book pro mid 2012 build. If I upgrade to Mavericks will MS Office programs still work? There does not appear to be an updated version of MS Office for Mac past 2011 that I bought last year and am using now. Thoughts? Suggestions?
Thanks.

Office 2008 and 2011 will run on Mavericks, but you may not be able to get the installer for it at this time.
(115014)

I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge. Did not have trouble until I upgraded to mavericks. I have a mac book pro, 10.9.1, iMovie 10.0.2. Says it is recording, but when I go to check, it says the file is empty.

I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge. I have been successful doing this in the past, but now it is not working. I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2. Everything in iMovie looks like it is working. It reads "recording" in the upper left hand corner of the pane while the video is playing. When I stop the process to check on my clip it says that the file is empty. The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously. My system is about one year old. Any suggestions?

Hey, Clinton,
     Thanks for your help! I was able to go to iMovie 9.0.9 and import video. I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support. They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded. That didn't change anything. In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge. But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2.
     1. Open iMovie 9 (finder/applications/iMovie 9.0.9
     2. Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
     3. Close iMovie 9
     4. Open iMovie 10 (probably in the dock)
     5. File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events. Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.)
     6. Select the clips and import. Click the blue "Import Selected" button on the bottom right.
You may get a message that some files cannot be imported. Click continue import. It's a little glitchy. It imports your clip, and also makes a copy of it, too. On the copy, the audio is normal, but the video is choppy. In any case, you would delete the copy, anyway.
Hope this additional information helps somebody else. Thanks again, Clinton for helping me!

I have a 3rd generation ipod nano. I upgraded to lion. I tried to buy an audio book and download it to my nano like I have done at least 50 times before. Now the dialog box states that I need an ipod touch for the same function. MacBook Pro 2008 w/ m.trac

I have a 3rd generation ipod nano. I recently upgraded to Lion which is causing lots of issues. Aside from that, I went to the Itunes store to purchase books like I have done at least 100 times before with no problems. Now I can by the book and get it to my computer, however when I tried to download the book to my 3rd generation ipod the dialog box informed me that to download any new audiobook purchases I would need an ipod touch. My ipod nano 3rd generation serves my purposes just fine. Why should I be forced to buy something I do not want just to continue something I have always done seamlessly? I know this is more of a rant than a question but I am sure someone else out there has had this happen to them. Maybe you could share your thoughts on how to work around this issue if possible?

I forgot to add the last obvious and crucial step I had taken - plugging a different iPod into my system. It was also not recognized. That was the final proof I needed to determine if the problem was device or system. But now what?
I truly appreciate any help I can get!
Thanks again...

I get a disk error when trying to upgrade to mountain lion on my mac book pro that also runs bootcamp

I recently tried to upgrade my macbook pro OSX to mountain lion via the app store. When it tried to install it gives me a disk error. I have run disk utilities and repaired, verified etc. but it makes no difference. I am running bootcamp as well and have tried to modifiy the partition sizes in disk utilities, but it says for both that they cannot be modified. I can switch my startup disk and reboot in windows, no problem, so getting my files off isnt the issue. I have also tried to recover the hard disk using time machine which i was lucky enough to backup the day before it all went wrong. However, time machine runs fine until it asks me which disk to recover and it gives me an option of the time machine disk or bootcamp, but no option for my mac partition. So, I have tried everything that makes snese, but getting errors with disks lock, cant repartition, disk error needs repair (which i know is not true, its only because of the Mountain Lion OSX that its messed up). Any ideas?

You have some other problem with your boot drive that has corrupted data backed up to the TimeMacine drive.
My advice is to boot into each operating system and manually backup just your Users files each to separate regular external drives (no Timemachine or backup software) and disconnect.
Make a note of any serial numbers, emails, address book contacts, export bookmarks etc. that isn't typically in your users folders data.
You might be able to Winclone 3 the Windows as a whole thing as it's appearing not to have issues but it's your MacintoshHD partition that is so that will have to be rebuilt from scratch.
Most commonly used backup methods
If your OS X parititon doesn't boot, you can use this to recover files.
Create a data recovery/undelete external boot drive
Without any further detail about your machine I can't advise specifically what to do, but it involves using Disk Utility to Zero Erase (move slider one spot to the right or in 10.6 using Security Option) the ENTIRE boot drive and reformatting, then installing OSX fresh and then setting up BootCamp again.
If you wish to switch your boot drive for something better, this is a good time to do this.
Install/upgrade RAM or storage drive in Mac's
If your machine is capable of Internet Recovery, then use that, then upgrade.
If your machine came with 10.6 or earlier, then use the 10.6 install disks and work up from there.
Erase, formatting, OS X installs on Mac's

3 user profiles on mac book pro. cant see one account in time machine - has it backed up? and for other users ''no permission'' to open folders - i just want to know that stuff IS backed up (before attempting upgrade to lion)

We have 3 user profiles on mac book pro. want to upgrade to lion but want to be sure that all users are backed up to ext hard drive via Time Machine. When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents. For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.

famfran wrote:
When I go into Time Machine - I cant find anywhere my user account (1 of the 3) - loads of photos and documents.
Be sure they're not excluded in Time Machine Preferences > Options.
Also, if iPhoto is open while a backup is running, Time Machine may not be able to back up the changes in the iPhoto Library. It will "catch up" the next time, if it can.
For other user accounts - if i go to open a folder i cant ''no permission'' is the message. All I want to be sure of is that there is a back up and for these 2 reasons I am far from sure.
That's correct; one user, even an Admin user, doesn't normally have access to another user's files. You should see the same behavior if you try to look at their data on your Mac.
Log on as the other users (or have them do it) to see their backups.

I book upgrade

Similar Messages

Maybe you are looking for