I bough a MacPro for one day and has a line on screen
A very poor quality and unacceptable from apple's product.
I bough a new Macbook Pro for one day, and found that there is now a line in mdle of screen. I asked the technical support and learnt that this is technical problems.
Dissapointed you apple.
If you've had your machine for less than 14 days, you can take it back to the seller for an exchange or a full refund.
There's really no one from Apple in these forums - we're users, just like you.
Clinton
Similar Messages
-
My imac is running 10.8.2 mountain lion and has been since it came out. In the last couple of days the Mail program has stopped sending. Incoming is OK. The message I get is that " my sender address was rejected by the server". We have 3 macs running Mail [2 of them running mountain lion and 1 running snow leopard] that have the same issue. Our other 2 Macs using Eudora are working fine. WHY ??????
Mail - Prefrences - Accounts - reinput all the settings you see. I believe one or more is corrupt, re-inputting them will reset them. You can also try Apple's suggetstions in:
http://support.apple.com/kb/TS1307 -
HT4623 after I update my iphone 4s with ios6 it worked ok for one day and now it is not turning on
after I update my iphone 4s with ios6 it worked ok for one day and now it is not turning on
Reset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears. No data will be affected.
-
My screen won't work, i have tried turning it off but i cant swipe the power down button because my screen doesnt work. I have only had my iphone 4s for one day and this has happened, someone please help me.
Did the trick! Not sure what I did to cause the screen to go numb, but this worked perfectly!!! I cleaned the screen and must have inadvertently selected something that locked the screen. This perfect solution kept me from having to run to the Apple Store. Many thanks.
-
I have a new Officejet 6500. It printed from my iPad perfectly for one day and then stopped.
The printer is a 6500 E710n-z. It is supposed to support airprint and in fact, did for a day. Now when I try to print an email from my iPad, the messages on the ipad show contacting printer and preparing page. Then nothing. It appears to have sent the email to the printer but nothing shows up in the queue. The only difference between day one and day day was I set up the fax on day two
Hi Dmatt,
I don't have the immediate answer. In case no one comes back with it, here's the Airprint "how-to" doc from Apple with the troubleshooting guide. It may help you untangle the problem spot.
AirPrint setup and troubleshooting
It is my pleasure to assist.
Say “Thanks!” by clicking the Kudos Star to show your appreciation for the help.
Fixed? Mark this Post “Accept as Solution” to help others find the answers.
Note: You can find “Accept as Solution” only on threads started by you.
Kind Regards,
Dragon-Fur -
Lion Recovery (Command R- reinstall Lion) Says 148 hours after being on for one day and over night
I accidently deleted some file on my computer that wouldn't let me start up my MacBook pro, 13 Inch, so I had to press Command- R at start up (brought me to Lion Recovery) and I choose reinstall lion and I started it yesterday morning and all day and over night. It's barely half way through and it says "148 Hours Left" which is crazy.. Should I just wait? is this normal? what do I do? Pleasee help someone!
It seems Apple is having problems with there servers or you have a Very Slow Internet connection. Best is to let it run as you can't use the computer anyway without the files you deleted.
There are reports of other that can not even get to the Lion download or any downloads for updates and such. -
Additionally, I cannot find my address book listed on any toolbar. I also put in the address for a site that I have previously gone to and get a page that says that the address can't be found. The address is that of a library. I am not pleased.
I currently have a pop-up from Wal-Mart that I cannot exit. It will NOT disappear no matter what I click. I will have to close down the computer totally to get rid of it.
Thanks.Do a malware check with a few malware scan programs.<br />
You need to use all programs because each detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
If you can't fix it with the above listed scanners then you need to ask advise on one of the forums that specialize in malware removal mentioned in the <i>Popups_not_blocked</i> article. -
What happened with the Calvin and hobbes books? On store for one day and then nothing. :(
I bought the first book of three, to test it, but at the next day all thee books went off the store. What happened??
Nobody here can tell you why something like that happens in the iBookstore. Presumably there is some issue between Apple and the publisher. You might try getting what you want from one of the other stores which have free ereaders, like Kindel, Nook, Kobo, Googlebooks, Sony.
-
-reformatted computer, reinstalled everything
-downloaded the newest version of mozilla
-happily went online for one day
-next day, browser does not load
-later the next day, browser doesn't even open up
-now when i go to open mozilla, something like this shows up:
"server busy, taking too long...if your firewall is on make sure mozilla is allowed to browse...adjust proxy settings blah blah...HI Juanverano,
Not a problem, Safe Mode will disable addons and hardware acceleration. If this continues and it is not an add on this will be the next step to try to disable acceleration:
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
#Open Firefox ''Options'' window (''Preferences'' on Mac or Linux) as follows:
#* In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]] and select ''Options'' for Windows or ''Preferences'' on Mac or Linux.
#* In Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
#In the Firefox Options (or Preferences) window, click the ''Advanced'' tab, then select ''General''.
#In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
#Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account or delete messages etc. For some reason, I CAN send mail on Apple mail using this account, although it takes several minutes. I can receive mail in this account on my iPad and by signing into aol on safari and internet explorer on my office PC. It's obviously a glitch in Apple's Mail. I've deleted this account and reopened it in Mail on my Mac Pro with no difference. Any suggestions would be greatly appreciated, this E amil account is major to my business.
http://support.apple.com/kb/TS3276
sounds like a corrupt database or index
the glitch is your home folder and mail folder, esp look at syncservices
I'd post in the mail or Lion forum where you will find similar issues being discussed.
http://www.apple.com/support/mail -
Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads".
When you go to "Report a problem" next to the item (Great Gatsby) on the email invoice or on the online account - it takes you to online support - if you elect problems with iTune downloads the page NEVER opens... no email contact. Please helpThis is bad - I have an Apple automated response that they got my report on 12/6, 12/10 and 12/14, and I haven't heard anything from them since the 6th when I got one reply that told me to do things I tried before reporting the problem. Between the 6th and 10th I replied to their response 4 times and they ignored me, forcing me to report a problem with two more items that wont download but getting no response.
How do they get away with this kind of behavior, especially for someone with FIVE Core 2 Duo macs and thousands of dollars of of iTunes store purchases? I'm getting really ******. -
Multicast works for a day and then stops
I'm running multicast in unicast mode on our WLC because I can't enable PIM on wired side yet for a couple reasons. It works consistently on 3 out of 6 WLAN's. And the weird thing is the other 3 WLAN's will work for a day, and when I come in the next day, multicast traffic has stopped flowing. I have verified this through IGMP snooping, using a bonjour browser, testing airplay, and using packet capture on a wireless NIC. 2 of the WLAN's are configured almost identically, but one works consistently day after day, and the other only works for a day after resetting the wlan. I have been coming in the morning and changing a single setting back and forth just to reset the WLAN so it will work for the rest of the day. I'm just writing this to see if someone can think of why it would work fine for the shole day and then stop working by the next morning. It's not an IGMP timeout setting, because it works for much longer than the timeout and behaves the same way even without IGMP snooping on. It started doing this after upgrading to 7.0.240.0. We have very little amount of multicast traffic on wireless, and low channel utilization. It does the same exact thing whether 802.11a or 802.11g so I don't think it has to do with data rates. When I have IGMP snooping on, and on the WLAN's where it's not working, the controller will see the multicast group join message from the client, but the client doesn't see the IGMP query from the controller. It shouldn't be wired config related since it's unicast mode. I've tried with and without broadcasting enabled. Any ideas?
Okay, so I discovered two things, but I still don't know what caused this problem. When I was running 7.0.230.0 I had increased my EAP-Broadcast key interval to 86400 due to a bug. This seems to be related to the fact that on the wlan's where multicast was not working, it stopped by the next day. When I backed this interval down to 3600 the multicast stopped working after an hour instead of a day. So that's why I believe it was somewhat related to the broadcast key, since that key is used for multicast.
What I realized is that multicast was working on all the wlan's on all AP's that had been rebooted since the controller upgrade (They had been rebooted due to a switch losing power). This is weird because all the AP's were rebooted when they received their own 7.0.240.0 software upgrade, so I don't know why they would have needed to be rebooted again. Anyway, I rebooted a few more AP's and multicast works properly on all wlan's on those. I'm just replying to my own thread here in case someone has a similar problem after upgrading your controller - try rebooting all your access points again. Or maybe reboot after changing EAP-Broadcast Key interval. -
It will work on one ; one day, and not the next day, but on third day it works again what is going on?
When I was searching for people that had the same problem as me, I found one that said to go on amazon and by a new charger flex. I got the new charger flex and my iPhone charges again. It is not that expensive and my iPhone charges now
-
I just got a ipod nano 6th gen, and ive been using it for 2 days, and it seems that the battery just lasts about half a day, on playing 1 to 3 songs in intervals of 1-2 hours. Whats wrong with my ipod?
Your nano would really have nothing to do with it at that point. It is really something between iTunes and whatever server out there on the internet that it is trying to connect to for the update.
Try posting this one in the iTunes forum, they might have a solution for you.
i -
I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....
Question asked and answered quite once a week.
Go to my iDisk (address below)
and download :
For_iWork:iWork '09:uninstall iWork '09.zip
Run it then reinstall the purchased software.
Yvan KOENIG (VALLAURIS, France) vendredi 2 janvier 2011 16:21:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please :
Search for questions similar to your own
before submitting them to the community
Maybe you are looking for
-
The notebook HP 630 (A6F38EA#ABZ) off the monitor after 1 minute, I changed the settings on both the bios that has windows 7, but without success. Regards
-
How to Delete Rejected Payment Drafts?
Hi All, How to delete rejected payment drafts from the SAP B1 system.I don't know if it is possible or not.If it is possible please give the solution for this. Regards, silpa.
-
i have this form that i created following this book. everything was going fine until now. this is the page : Text As everyone can see, when clicking "View Urls" it suppose to show the list of categories in the drop down menu saved in my url table. bu
-
New fields created in MDM Console not visible on Portal iViews
Hi All I would like to ask you. I recently encouraged very strange and annoying problem. We are developing Vendor repository. Menatime we have created some iViews and pages on the Portal. All of them are displayed from Main table. We can see all fiel
-
Unable to install Windows XP Pro into Parallels
When I try to open a new VM and install windows XP Pro using my install CD, I understand to click on the right arrow to start the VM. However, when I do that, rather than read the CD and install the software, it makes me (requires) reboot the iMac. I