I bought 3 records converted now in AAC. iTunes doesn't accept conversion.

I bought 3 Apple now converted in AAC. iTunes doesn't allow conversion in MP3.

So are you saying you purchase thee albms from the iTunes Store (which come in the AAC format) and want to convert them to MP3's?  Is that correct?
B-rock

Similar Messages

  • HT5577 When I bought a new computer with Windows8.1, iTunes wouldn't accept my old ID and password, so I set up a new ID and password.  Now I can't locate or sync my old library of music onto my iPOD.  Any ideas?

    when I bought a new computer with Windows8.1, iTunes wouldn't accept my old ID and password.  After entering a new ID and password I got in, but now I can't sync the music that was in my original library.  When I try to sync a message says that music will be removed from "other" libraries, so I know they're out there somewhere.  Just can't get to them.  Any ideas?

    - Is the computer authorized for the iTunes account(s) used on the iPod?
    - Are you syncing or manually managing music?
    - In iTunes if you go to Preferences and then go to the Devices tab, what date is show for the iPod backup? Is if before you switched computers?
    - Your iPod sees the new computer as a new library/computer and you can only sync to one library.  You need to restore you iPod from a backup.  If that bacup is hosw in Preferences, restore from that backup. 
    - If the backup is after you switched computers, you have two options:
    --- Try to make a backup by right clicking on the iPd under Devices in iTunes and selecting backup.
    --- If you can't make a backu, can you get one from the backup of your old computer.  It is located here and yu may have to have show hidden files turned on.
    Mac: ~/Library/Application Support/MobileSync/Backup/
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

  • Convert selection to AAC (iTunes 5)

    After inserting a CD and then trying to covert selection to AAC I get the message "Could not convert the selected songs. The songs may be write-protected or of the wrong type" and then "Eror occured while converting the file. An unknown error occured (-48).
    This never happened in previous version and yes I've tried various CDs - all give the above message?

    You don't select the songs on a CD and then convert selection to AAC. You click on the Import button in the top right corner of the winder.

  • I've recently changed my network provider. iTunes recognized the new number and amended it in iTunes. My original number is now available but iTunes won't accept it or allow me to change the number on the device. How can I resolve this?

    Hi Guys
    I have just changed my telophone provider in the UK from )2. To transfer the number, which I wanted to retain, took 24 hours and I was given a new number by the new provider Virgin Mobile. To unblock my iPhone I had to connect it to iTunes, which recognised my device and changed the telephone number. 24 hours later, my old number returned but iTunes won't recognise the device or allow me to change the number back to the original. How do I reslove this?
    Many thanks ;-)

    If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name.  (Deleting the account from your phone does not delete it from iCloud.  Your data will be synced back to your phone when you sign back in.)
    If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off.  When prompted choose to keep the data on your iPhone.  (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.)  After everything is turned off, scroll to the bottom and tap Delete Account.  Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On.  When prompted, choose Merge.  This will upload the data to your new account.
    You won't lose any photos in your camera roll or photo library.  If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account.  To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

  • I lost my itunes (and app store) pass word.  I updated by going to the itunes store.  However, now the app store won't accept the new password.

    I lost my itunes (and app store) password.  I updated by going to the itunes site per the responding emailed instructions.  However, now the app store doesn't accept my new itunes password.  What to do?  Thanks so much!

    Try here >  Frequently Asked Questions About Apple ID
    If nothing there helps, use the email form here >  iTunes Store - Contact Us

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • Converting recorded vinyl track to AAC (.M4A)

    After finally learning from these forums that AAC = .M4A I am successfully importing cd tracks in compressed format (thank you!).
    However tracks I have recorded to my hard drive from vinyl using Audacity stubbornly remain in .AIFF format when imported into iTunes, squandering 90mb or so of hard drive space each time.
    Is there a way to import them as AAC? How does iTunes know the track is coming from HD and not cd?
    Regards, Michael

    You need to add them to iTunes and then use iTunes to convert them.
    You iTunes prefs -> Advanced - Importing is already set to AAC.
    Select the aiff files you wish to convert then menu Advanced -> *Convert selection to AAC*.
    This will make a new aac version o the song.
    You can then delete the aiff file if you wish.

  • HT1473 I get a message the songs are in wma format and iTunes will convert them to AAC format - do I select Convert or Skip?

    I get a message the songs are in wma format and iTunes will convert them to AAC format - do I select Convert or Skip. I ripped new CDs I bought using Windows Media Player and they are saved on my C drive. I have done this before but cannot do it now.

    If you want to play them in iTunes, choose "Convert."  This will allow iTunes to create new AAC versions and add those new versions to your iTunes library.
    The original WMA files will still be in the folder(s) wherever they currently are.  iTunes will ignore the WMAs once it has the converted versions.  It is then up to you if you wish to keep or delete your WMA origninals.

  • HELP!! convert selection to AAC wont work

    I NEED 2 KNOW HOW 2 DO THIS IT WONT WORK IT SAYS THAT THERE IS AN ERROR WHAT DO I NEED 2 DO?? I DOWNLOADED A VIDEO AND ITS ON I-TUNES BUT IT WONT PUT IT ON MY I-POD CAN ANY ONE HELP???!!??

    HELP!! convert selection to AAC wont work
    Why do you want to convert it to AAC?
    Why not convert it for iPod?
    IT SAYS THAT THERE IS AN ERROR
    What exactly is the error?
    I DOWNLOADED A VIDE
    From iTunes Music Store?
    What format is it now?

  • Elegant solution for converting a mixed AAC/MP3 playlist to all MP3s?

    Does anyone have an elegant solution (AppleScript?) for taking a playlist containing a mix of unprotected AAC and MP3 files, converting only the AAC files into MP3 files, and preserving the order in the playlist? It seems to be a terribly tedious job to locate each of the newly created MP3s individually and placing them in order in the playlist. Looking for suggestions. Thanks.

    Just had to say thanks for waking my mind up. I'm having troubles in converting over 7,000 MP3s to AACs. I decided to convet everything to the smaller 128kbps AAC meanwhile cleaning everything up. Well, the batch conversion stopped half way through and now I've got duplicats of a ton of stuff in both MP3 and AAC. I had no idea where it stopped on the MP3 list. I completely forgot about sorting by dates. Now, hopefully, I can figure out where it stopped and start up the converting from there rather than starting over and converting everything from the beginning. Got my fingers crossed.
    Since I have a bunch of duplicates, I know I can sort these by "showing duplicates". However, is there any to tell it to delete all dups? It'll just take a long time going through and manually erasing. Any tips would be great.

  • Can't Convert Wav to AAC

    I have been adding my lecture files (Olympus Digital Wave player) to my iTunes for several semsters now. I realized that I needed to convert the wav files to AAC files in order for my iPod to play them. For some reason, I have not been able to convert the files this semester and I don't know why or what has changed. Everytime I try to convert one of them, iTunes says: "Error occurred while converting the file "PHSC 10-28-08". The disk could not be read from or written to." The files are on the hard drive. iTunes is looking at the files in its own directory since I've already added them to the library. The hard drive has plenty of space.
    Anyone have any suggestions? I have checked and double checked to make sure the folders and individual files are not marked as read only. I'm becoming really irritated. I'm halfway through the semester and have finally run out of patience and I am begging for help!

    I hadn't tried playing them as wavs in iTunes until you asked. It turns out they won't even play as wavs. It acts as though each file is a second or so and thinks it's played it and then moves onto the next one.
    These aren't music files. They are lectures from my classes. I have removed them from iTunes, telling it to send them to the recycle bin, and then reimported them several times. Burning them to CD and then bringing them into iTunes that way would require doing it twice a week.
    I was able to play them through RealPlayer so there is nothing wrong with the original wav file, just something wrong when iTunes brings it over to the iTunes area.

  • ITunes will not convert file to AAC, please help.

    I have a rather large file, an audiobook to be precise. It is in .mp3 format and is approximately 8.5 hours long. I would like to convert it to AAC but iTunes does not seem to want to convert it. It seems to convert the file until the last few seconds and then stops, coming up with the error message:
    'Error occurred while converting the file "File Name". An unknown error occurred (-50).'
    As soon as I click the 'okay' button, it deletes the AAC file and I'm left with nothing. I've tried several times before and after restarting my computer and also I've converted smaller song files (3-4 minutes)successfully.
    I'm using the latest iTunes and I am using Windows Vista. I have a strong suspicion that my problem is something to do with either the file length or perhaps the file has a fault in it. However, before I take action to resolve this I would like to know if there is any possibility it is an error with my iTunes.
    Thank you for helping. =)
    Mischa

    unplug iphone
    press home button and power sleep button simultaneously for a count of 16 seconds
    phone should now be off
    press and hold home button while connecting the iphone to computer
    start itunes
    The phone/ipad should now get recognized
    Hope this helps...it did for me!
    e69

  • I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going?

    I have bought a Season pass for The Big Bang Theory. I have downloaded alle recent Epiodes without any Problems. But now... i can't download the latest Version for free. Itunes doesn't recognize my Season pass and let's me buy it again. Whats going? Do I miss something?
    Best regards,
    Michele

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • I'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it?  the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

    i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it?  the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

    "I have been able to convert to AAC by first converting to AIFF  and then to AAC. This is a pan though."
    this worked for me.
    thanks.

  • "xml:lang" is getting replaced by "lang" in XML Record converter class

    Hi All,
    The issue i am having is in the Record converter class which converts XML Record to JCA record, the string "xml:lang" is replaced by only "lang" due to which the transaction i am running fails as the application to which this xml is posted rejects it.
    Details:
    I have a Custom Resource Adapter(on JCA 1.5 Spec) deployed on Oracle Weblogic Server 10.3. I invoke this adapter from the BPEL process (SOA Suite 11g). I have implemented the XMLRecordConverter interface which converts the XMLRecord to JCARecord. During this conversation the "xml:lang" string is replaced by "lang" due to which the application to which this xml is posted is throwing error.
    The code snippet of the XMLRecordConverter implementation is below
    import javax.resource.ResourceException;
    import javax.resource.cci.Record;
    import javax.xml.transform.dom.DOMSource;
    import oracle.tip.adapter.api.record.RecordElement;
    import oracle.tip.adapter.api.record.XMLRecord;
    import oracle.tip.adapter.api.record.XMLRecordConverter;
    import oracle.tip.adapter.fw.record.RecordElementImpl;
    import oracle.tip.adapter.fw.record.XMLRecordImpl;
    import oracle.tip.adapter.fw.util.JCADOMWriter;
    import oracle.xml.parser.v2.DOMParser;
    import org.w3c.dom.Document;
    import org.w3c.dom.Element;
    public Record convertFromXMLRecord (XMLRecord xmlRecord) throws ResourceException
    String xmlString;
    RecordElement payloadRecordElement = xmlRecord.getPayloadRecordElement();
    if (payloadRecordElement != null) {
    xmlString = serialize(payloadRecordElement);
    else {
    throw new ResourceException("No data in record from EIS!");
    RecordImpl rec = new RecordImpl();
    rec.setStr_Payload(xmlString);
    return rec;
    private String serialize (RecordElement recordElement)
    if (recordElement != null) {
    org.w3c.dom.Element wsifEnvelopeRootElement =
    recordElement.getDataAsDOMElement();
    if (wsifEnvelopeRootElement != null) {
    JCADOMWriter domSerializer = new JCADOMWriter();
    String xmlString = domSerializer.print(wsifEnvelopeRootElement);
    return xmlString;
    return "<empty>";
    the resulting xml has all the occurrence of "xml:lang" replaced with "lang"
    If i add namespace ( like xmlns:xml="http://www.w3.org/XML/1998/namespace") at the root element of XML coming from BPEL process then the replacement is not happening.
    Has any of the Oracle api's used in the above code uses namespace aware parser or the BPEL engine is replacing "xml:lang" to "lang" when it passes the xml to XMLRecord Converter class?
    The above code works perfectly fine in Oracle Fusion 10g (Oracle AS 10 and SOA Suite 10g)
    Any information will be really helpful specially in the oracle api's
    Thanks,
    Amith

    Hi wilson,
    Do you know how to move or delete this thread? i didnt find any options to move or delete this thread

Maybe you are looking for

  • Information on table type datatypes.

    Hi, I am working with the table type composite datatype. After I insert the values to the table type declared variable how will I be able to print that or use it in further DML operations. example create or replace procedure xxx_proc as type u_rec is

  • How do I get my printer to work with my iPhone/ipad wirelessly

    how do I get my printer epson workforce 610 wirless to work from my iphone/ipad?  I downloaded the epson printer app.

  • How do i replace an asset with a newer version?

    let's say i have an asset which is a Photoshop file, filename "v1". i want to replace the asset with a newer version of the Photoshop file, filename "v2". how do i replace the "v1" asset with the "v2" asset, so that all instances of "v1" in the proje

  • Playlist shuffling problems.

    When hit shuffle on playlists or even all songs its skips over a lot of songs. The song count will go from 50 to 12 making it impossible to listen to an entire playlist on shuffle. Is there a way to fix this or do I have to live with this until the n

  • Redisplay content in textbox

    Hai all i am all new to jsf. i have created a edit profile page where it is displaying the content fetched from database in textbox and combobox, now i have a field suppose username which is a required field like <h:inputText value="#{xBean.username}