I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to

I bought a bluetooth Bose speaker so I could listen to music from my imac in multiple rooms at the same time. I wanted to use BOTH my existing speakers using the headphone jack and add additional bluetooth speakers in other rooms, but the imac wants me to pick one or the other, is there a way to have both?

I asked same question
Any answers

Similar Messages

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

  • I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

    I can't hear my phone calls unless I put it on speaker. Tried cleaning by blowing on earpiece and headphone jack and pushing near front camera and earpiece speaker...no luck. HELP!

    If you've tried everything mentioned you probably have a failed earpiece. One option is to get a BlueTooth headset and use it for all calls. It will be cheaper than the $199 out-of-warranty replacement price from Apple (if it's still in warranty or AppleCare it will be free). Good BT headsets can be had for around $40. And it will hold you over until the Next New Thing from Apple is available

  • Why does my volume control on my iPod touch only work when i have Earbuds or Headphones or a speaker connected to the headphone jack, and not also when there is nothing in the jack?

    I can't adjust the volume of the iPod Touch when it has nothing plugged into the headphones jack, but i can adjust it when i have earbuds or headphones or a speaker ;plugged into the iPod Touch

    Try cleaning out/blowing out the headphone jack. Insert/remove the the headphone plug a dozen times or so.
    Try the following to rule out a software problem.:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem. Could be a bad headphone jack.
    Apple Retail Store - Genius Bar

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

  • I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro.  The mac book does not have 3.5mm  jacks.  Does anyone know if a jack to USB converter would work?

    Is there a pattern to the time of day or other detail that may be
    traced back to a OS X system cause of this odd phenomenon?
    Are there any copies of system files on any of the attached USB
    external drives? Any libraries, such as iTunes, iPhoto, etc?
    Once the drives are indexed by Spotlight, are their permissions
    ignored by the OS X? Content, if neutral, should not affect the
    wake or sleep cycle; especially if they're ignored by the OS X.
    Could there be a bad cable or other component? If so that would
    be a difficult process of elimination to detect it. Usually replacing
    most suspect components in the USB stream (external to Macs)
    is a rote way to mechanically test that idea; & not 100% sure.
    Does the equipment all have a good ground to the utility or house
    electrical field? An intermittent ground may affect more than sleep.
    Hard to say at this point. Maybe a late-night talk radio guru on
    remote viewing could peer into your situation and sleuth it out?
    Sorry to have run out of ideas, but the process must be electrical
    & mechanical to some extent. - Or perhaps odd software inspired.
    Do you have any phone-home spyware items inside, just jumping
    at the chance to spill your information? Little Snitch may help.
    PS: Perhaps the computer needs to go into Apple & have a genius
    or product specialist at AASP test the unit thoroughly... BlueTooth?
    see:
    https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
    Good luck & happy computing!
    edited 2x

  • The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode?

    The sound on my laptop is locked, cant plug in my headphone jack and there is no red light, The laptop is retina display and I am on panic mode.
    I have researched the whole subject and the closest thing to my case is one with a red light. I tried the toothpic manoevre suggested by pany with no results. Please help me.

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.

    how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time.  I can use one or the other, but not both.  From systems Preferences I must select one or the other.  I want both to work all the time.

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    I have ipod touch 1st gen and it will no longer detect that i have headphones in the headphone jack and so i cannot turn up my volume. Is there any way it can be fixed?

    Have you tried:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    Apple will exchange your iPod for a refurbished one for this price:
    Apple - Support - iPod - Repair pricing
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • Can a 160gb back cover, headphone jack and battery work on a 120 gb ipod classic?

    Can a ipod classic 160gb back cover, headphone jack and battery work/with on a 120 gb ipod classic?

    Yes, the only difference is the HD capacity, the other physical attributes are the same, as there are paddings in the 120gb casing.

  • HT203128 iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.

    iTunes 12.1.050 - Rollback: Updated from 12.01, now I cant't change track numbers and add additional data fields. How can I roll back to the previous version? @Apple, I want a $100 gift card for the inconvenience.
    - it's all said in the title. I can't understand why the developers turn things bad ... risking loosing Apples valuable customers.
    More examples needed? (check out the communities and the reviews)
    - OSX: Maverick to Yosemite = not recommended (check it out > http://roaringapps.com/apps)
    - iPad: older versions as iPad2 should not upgrade to iOS7/8 (it's not supporting its hardware accordingly, it's designed for the latest hardware)
    - iTunes (it's possible to rollback to 10.7 - 11.4, but you need to breech OSX system security framework)
    - Pages (was a real alternative for many of us, each update reduced features and created incompatibility to older work files)
    The list could easily extend to ...

    You can offer Apple feedback here: http://www.apple.com/feedback/
    as for "
      "@Apple, I want a $100 gift card for the inconvenience"
    dream on.

  • I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    I went in you tube and watched videos on how to fix my headphone jack and its not the headphones cause when I look inside I see this little white costing in there I think that's the problem how can I fix it

    - Try cleaning out/blowing out the headphone jack. Make sure that y do not leave any foreign material or leave anything in the jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    I have a Honday FIT 2013 with the USB for iPod and the Auxillary jack. I plan to purchase an iPhone 5c. Can I listen to music from my iPhone through my car speakers?

    Click the "Upgrade Eligibility" link on the right side (under "Learn more about buying iPhone) here:
    http://store.apple.com/us/buy-iphone/iphone5s
    If you're not eligible for upgrade, it will tell you how much more than US$199 you will be charged.

  • IPOD classic has static on both the headphone jack and 30 pin connector

    Static makes it hard to enjoy.  Anyone else?  Anyone have a solution?

    Note: This is NOT a software, headphone, nor headphone jack problem.  My meticulously cared for iPod Classic lost audio output from both the headphone jack and sync/dock connector. I Google'd the problem and found info as to some internal defect... apparently a chip connection loosens over time stopping all audio output. Pinching the lower right corner of the iPod restores the audio temporarily.  I called Apple Support and they did recognize the problem in certain iPod models but said having gotten five years of use out of the device was really good.  Not really happy about spending another $300 on a new Classic that will last a few years... "if i'm lucky"

  • Headphones won't go in the headphone jack and volume stuck on mute

    my headphones will only go about halfway into the headphone jack and the volume is stuck on mute. it looks like there is something sticking out inside of the headphone jack.

    Take your MBP to an Apple Store for a check.

Maybe you are looking for

  • What happen to julius thread in ABAP DEVELOPMENT?

    It was reformatted by the new 5000 characters per post limit I am busy working on a solution to split them and move each part to its own respecting sub-development forum - but have not got to it yet. Sorry for being slow. The FAQ and memorable discus

  • How to call  group of files  into it_upload.

    i have the requirement like this.... can i use 6 times to upload six files or at a time can i found all the file in internal table through function module.

  • LR 2 - how to undo changes after unselecting picture?

    Hi, I do a bunch of edits on picture A.  Then, I go to picture B and do some edits.  Then, when I go back to Picture A and decide to change it, I don't see any option to undo those edits any more.  I thought it would be in the "History" section in th

  • Credit as per quanity in Empties Management

    Hi Experts, I need to implement empties in beverage industry. this is new for me. My Client needs to maintain the credit limit for empties on quantity basis for customers. I have not found any way to do it in standard SAP , Is there any way to do it

  • Virtual Security Tooling integration

    I need a solution that integrates these three functions: Packet capture and deep packet inspection with something like virtual switch port mirroring sessions and mirror them to collectors. Scanning for security and compliance with something like vMwa