I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. Is anyone able to give me a hint how to handle it?
Thank you in advance
arl

Hi Keith, sorry for my late reply.
Surely I am able to connect to the help function when Icontact the website
of AdobeLR5.The problem is as follows,
When I open LR5 on my computer and work with it and try to open the help
function in the software, I don't get it.
When I bought the CD I was naiv enough to believe that I get an independent
working software. I learned in the meantime, that the seller does not allow
to work with, without being connected to them.
I don't believe that I am paranoid, but I like to buy something and use it
without to inform the supplier that I do it. Otherwise I could have bought
the license fpr LR5 via internet.
Best regards
Karl
2015-01-02 13:42 GMT+01:00 kglad <[email protected]>:
I bought a cd with Lightroom 5. After installation and registration I
am not able to use 'help' function and I cannot update the software. I
anyone able to give me a hint how to handle it? Thank you ind advance Karl
kglad <https://forums.adobe.com/people/kglad?et=watches.email.outcome>
marked Keith_Reeder
<https://forums.adobe.com/people/Keith_Reeder?et=watches.email.outcome>'s
reply on I bought a cd with Lightroom 5. After installation and
registration I am not able to use 'help' function and I cannot update the
software. I anyone able to give me a hint how to handle it? Thank you ind
advance Karl
<https://forums.adobe.com/thread/1669640?et=watches.email.outcome> as
helpful. View the full reply
<https://forums.adobe.com/message/7059196?et=watches.email.outcome#7059196>

Similar Messages

Can someone send me the link to the stand alone version of light room 5 were I can buy it. Thank you in advance

Were can I found the stand alone version of lightroom 5?

Rob,
Thank you so much.
In one way or another I managed to purchase the upgrade of lightroom instead of full version.
It is now corrected, thank you so much
Best Regards,
Fredrik
18 aug 2014 kl. 11:11 skrev Rob Cole <[email protected]>:
Can someone send me the link to the stand alone version of light room 5 were I can buy it. Thank you in advance
created by Rob Cole in Photoshop Lightroom - View the full discussion
If you go to the main Lightroom page - where most links take you to cloud signup, at the very bottom, click on "Products" - scroll down to 'Lightroom'..
Products
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6649902#6649902
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Hi , i'm new here and i would like to ask a question about iPad 2 . Well , actually when i hold my finger on any icon , its not jiggling , i need to fix the icons . May i know what can i do in this case ? thank you in advance ,

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanks

Can anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. What should I do? Thank you in advance.

I gave my ipad 2 to my brother last month. After that he erased all content and settings, sign in with his apple id. The next day until now, I found out that I can not udpate my apps both on my iPhone and iPad Air. I had create new apple id, change my password, delete the icloud acc. But still I can not update my apps. I have many of red notifications on iPhone and iPad Air. What should I do? Thank you in advance.

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

When syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!

when syncing my iphone 6 plus, i now get an error that reads, "IP address conflicts with another system or network." How can i eliminate this error permanently? Thank you in advance!
This never happened before, however the last couple of months it comes up every time I plug my USB from PC to iphone.

HyperNova Software,
Thank you so much. Because I am very computer illiterate, could you help me on how to get started? I don't have the slightest on where to get started, the steps to follow, etc.
Can't thank you enough for your help!

Recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of

recently bought a samsung NX30 camera which came with lightroom 5, after several hours of googling i got it setup properly with the correct camera raw to be able to access my raw images. I found my old laptop was very slow when processing the hundreds of images I usually take on a weekly basis. I bought a new faster laptop but when I looked for the cd with the software and serial I could not find it in the Xmas clutter. I downloaded a trial version of lightroom and got it working on my new laptop. Is there a way to access the serial number from my previously installed version and insert it into the trail version to make it work for me?
Myron

Mea culpa
While i registered all my cs2 thru 6 versions and my lightroom 2 thru 4 versions and recorded the serials and saved the adobe registration emails. Since this came as a freebee with the camera i neglected this vital step. I have the instslled version on my old laptop but want to install it on my new one. Thanks to Jim Hess I got the serial so all is well in my world and I will register it with ADOBE
Myron

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

Hello. I need to define a mesure in a picture: I took a picture of an object with a ruler and I want to signify to photoshop "this segment = 1 cm". How to do? Thank you!

That's a good precaution, norm. It should be no problem is you have an object on a flat surface next to a ruler. It gets trickier in security camera frames.
Anyway that is one example. Anne can look further into the measuring tools of Photoshop Extended to see if it helps.
A note on the screen resolution thing. When I calculate the screen resolution, I go into Photoshop > Preferences > Units and Rulers
and enter it here in place of the default 72 ppi. Then when I use View > Print Size, the on-screen rulers will match a physical ruler.
That's if you wanted to look at the actual printed document size onscreen.
Gene

How can I remove password from firmware? Thank you in advance!!!

This is really causing problems & wreaking havoc on my notebook. Does or has anyone had experience with this, and if so, how did YOU resolve this???
Thank you in advance to anyone who responds to my question!!!!!

This is what I was told by Apple Support on the phone (I had a nasty crash & lost my Max OS X operating system) Luckily I was planning to update to the newer release of Mac OS X Snow Leopard, & backed up all my files just a fww hours before it happend..I currently have version10.7.5). The woman I spoke to said having a Firmware password really causes a lot of problems....so why did it ask me for a password?? I do not understand!!
I could swear I read somewhere if you login as Administratror; you could eliminate this password. My system is finally back up & working. I added a seconday unrestricted login (which I should have done anyway as I know better than that!!). I am going to check a few things out & will definotely let you know the outcome. Thank you very much for your quick response!!!!

Does anybody know how to create an equalizer effect? Thank you in advance!

Hi guys, I am trying to do something like that http://www.youtube.com/watch?v=_wC721zLZz4, and I hope there is a tool to make an equalizer effect in a simple way.
I would really appreciate if someone help me with this task since I am very beginner in After Effect.
Thank you in advance!
Alina

See this earlier thread
http://forums.adobe.com/thread/960730
The Coremelt VeeYou set of freebies is far more interesting that the ol' boring audio graph you get in AE.

I will soon be purchasing a new PC running Windows 7. I need to know how to migrate my iTunes Library and apple devices to the PC. Is there a previously published support document on this topic? Thank You.

I will soon be purchasing a new PC running Windows 7. I need to know how to migrate my iTunes Library and apple devices to the PC. Is there a previously published support document on this topic? Thank You.

Connect a blank powered external drive to the PC.
Right click on the Disk in the File manager and choose format: exFAT
(if it's a XP machine, first install exFAT from Microsoft and reboot)
navigate to your user account folders on the PC and drag and drop copy (or copy and paste) to the external drive.
(if a program has your files, then export them out first)
Hook up the drive to the Mac, and transfer files to the desktop or to their same appropritate folders.
Import photo's into iPhoto program, import music into iTunes etc and they will manage those files.
You can continue to use the external exFAT drive between Mac's and PC's
Do not format the drive NTFS or FAT, NTFS can't be written too by the Mac and FAT can't hold over 4GB sized files.
If you format exFAT on the Mac, it likely won't work correctly on the PC.
"Migration" type programs are a utter waste of time and effort between PC's and Mac's for the fact that only certain files (and no programs or anything else) will work between them, also it's a hassle and takes too long. So don't even bother with it.

TS4194 When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

When I reboot my windows desktop i get a message that says apsdaemon.exe can not start because msvcr80.dll is missing. How do i fix this? Thank you in advance.

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

Impossible to update the softwares from the top CC menu. First the menu does'nt show the software on my computers and after a while of seaching, the icon disapear from the menu and no uptade. Can someone tell me why. Thank you

This is an open forum with a mix of other users and Adobe staff, not Adobe support... you need Adobe support
Adobe contact information - http://helpx.adobe.com/contact.html may help
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"

I purchased Damages, season 2 from iTunes Store, and I got it in French by mistake. How can I exchange this season, or change the language? (My playback setting was already on English for default language). Thank you, Judith Hamery

I purchased Damages, season 2,
from iTunes Store, and I got it in French by mistake.
How can I exchange this season, or change the language? (My playback setting was already
on English for default language).
Thank you,
Judith Hamery

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

HT1364 How do I move photos from a Dell computer to be able to show them on an iPad 2 and Apple TV 3? Thank you in advance.

How do I move photos from a Dell computer to be able to show them on an iPad 2 and Apple TV 3? Thank you in advance.

Open itunes, connect ipad, select what you want, sync

I bought a cd with Lightroom 5. After installation and registration I am not able to use 'help' function and I cannot update the software. I anyone able to give me a hint how to handle it? Thank you ind advance Karl

Similar Messages

Maybe you are looking for