I bought a movie, but I can't find it to watch. I can't even buy another one. What am I doing wrong?

In fact, now I just see: INTERNET, COMPUTADOR (PC) e AJUSTES (MENU/SETTINGS) - I'm brazilian and I'm not so sure about the name of MENU in EUA Apple TV.
Anyway, I remember that until yesterday I could see FILMES (MOVIES) at the first MENU, and now it's no longer available.
Do you know what's happening?

Similar Messages

I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?

The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
Be sure it indicates 11.1.3.
If it is, here's further troubleshooting:
http://support.apple.com/kb/TS1538

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

I'm reading a pdf in ibook and it takes up the whole screen so I can't manage it... what am I doing wrong?

its ok now...

HT204380 When I contact someone with FaceTime, they can see me but not hear me. I can see and hear them. What am I doing wrong?

When I contact someone on FaceTime, they can see me but not hear me. I can see and hear them. No one has ever been able to hear me. What am I doing wrong?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
I saw one post where a user said dust got inside the small microphone hole. Using a vacuum cleaner removed the dust and restored the audio.
 Cheers, Tom

Can not use my backup photos, what am I doing wrong?

I am having problems using the photos from my external hard drive. I switch library, and get all the thumbs up in iphoto. When I try to edit them or export in any way, I am not allowed to. This is very frustrating, can anyone tell me what I am doing wrong?

n555:
Welcome to the Apple Discussions. The "!" in the edit window indicates that iPhoto has lost the link to the original file in the Originals folder. Check in the Originals folder to make sure you have the full sized image files in there.
Did you rename or move any files/folders in the iPhoto Library folder from the Finder? That's one way to get the situation you're experiencing but it would be only for those you tampered with. Since it's the entire library then you've probably fallen victim to the damaged database file problem that hit a lot of users.
If the full sized image files are there you can try to rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options. I'm not optimistic that the rebuild will recover your library but it's worth a try.
If the rebuild does not work you'll have to start a new library and import the image files from the damaged one as follows:
1 - rename the iPhoto Library folder that's on the external HD.
2 - launch iPhoto with the Option key depressed and, when asked, select Create a new library, navigate to the external HD and do so.
3 - with the new library open, drag the Originals folder from the old library into the open iPhoto window.
This will give you a new library with the same rolls as the old one. However you'll lose your albums, slideshows, keywords, etc.
To help protect from this type of problem in the future check out the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.

HT3819 I've always been aware of Home Sharing but haven't been able to get it to work for YEARS!!! What am I doing wrong? I'm using the same apple id on all my devices! Help.

How can I get Home Sharing to work? I've know of this feature for years but have never got it to work. I'm using the same apple id on my devices, which is [email protected] What am I doing wrong? Please help.

http://support.apple.com/kb/HT3819 homesharing
http://support.apple.com/kb/TS2972 troubleshooting home sharing.
i <3 Homesharing. I enabled it at home, and where I work I use a mac so I enabled it on that computer as well so I can listen to my own music library while on breaks/lunch =)

[SOLVED] Can't get GDM to run - what am I doing wrong?

Alright, I'm running a fresh, up to date install of Arch in a virtual machine, and I'm consistently unable to get GDM to work properly. I pretty much followed the beginners' guide, and tried reinstalling from scratch several times. I've installed gdm, gnome, gnome-extra, dbus, and anything else the wiki recommends, like virtualbox-archlinux-additions. I edited /etc/inittab and /etc/rc.conf accordingly.
Relevant lines in /etc/inittab:
#Boot to X11
id:5:initdefault:
x:5:respawn:/usr/sbin/gdm -nodaemon
Relevant lines in /etc/rc.conf:
MODULES=(vboxguest vboxsf vboxvideo)
DAEMONS=(syslog-ng dbus network crond)
When I start the virtual machine, it displays the CLI login interface along with a bunch of warnings:
Arch Linux 3.4.4-2-ARCH (tty1)
vbox login: gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.271335 seconds
gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.011053 seconds
gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.011250 seconds
gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.010699 seconds
gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.010361 seconds
gdm-binary[388]: WARNING: GdmDisplay: display lasted 0.010921 seconds
gdm-binary[388]: WARNING: GdmDisplay: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors
After that, I can still log in just fine, though I obviously never get into any desktop environment because of it. I have no idea where to find the X server log. I skimmed through /var/log, but couldn't find any log file with remotely helpful contents besides 'gdm'. The contents of the 'gdm' file:
** (gdm-binary:519): WARNING **: Failed to acquire org.gnome.DisplayManager
** (gdm-binary:519): WARNING **: Could not acquire name; bailing out
I've been bashing my head against this problem for several days now, but been unable to actually fix it. Anyone feel like pointing out what I'm doing wrong or how to proceed?
Last edited by Caelum (2012-07-11 19:44:04)

Aaaand figured it out thanks to that one. I skipped starting it manually in this VM; got it to work when started manually on a previous install, and hence assumed it'd be fine.
Turns out, I was doing the installations of the base packages - # pacman -S xorg-server xorg-xinit xorg-server-utils - wrong somehow. I think I must've missed that step or something; installing xorg-server and xorg-server-utils through Pacman just now solved my problem.
Thanks for the help. Much appreciated.
EDIT: Wonder, you ninja you.
Last edited by Caelum (2012-07-11 19:45:28)

I have iTunes open on my computer and have chosen hen songs that I want to put ony iPod but when I click sync it loads a little bit and then everything disappears. What am I doing wrong?

I had my iPod set up and everything then when I hooked or up to my computer iTunes told me that my iPod could not be read and that I needed to restore it, so I did that and after when i plugged it into iTunes and selected the songs that I wanted to put on my iPod and clicked sync it started to sync but right when it gets to the end it goes blank and says choose your songs/playlists once again and I have to start all over. What am I doing wrong?? Help me , I neded my music!!

Try here:
iTunes for Windows XP: Troubleshooting unexpected quits, freezes, ...
It contains a link for Vista/7

I have a serial number to install acrobat XI pro but it says this is invalid, i have checked this number and it is correct, what am i doing wrong

Being a student i was eligible for education edition, i have received a serial number from Adobe but when entered into the trial version, it is not valid? what am i doing wrong?

Did you get the S/N or the number to provide in order to get access to the S/N. They have changed some of the activation processes and it includes a step of having a number to get the other number. Sounds kind of weird, but that may be what you are seeing. I think they have implemented that process, but am not sure. I don't due activation on a regular basis and so am not aware of the implementation of a change that has been mentioned.

Hello like would anyone like to help me. I can,t get the control pallete to open so that I can chose a theme background ect. what am I doing wrong

i CAN,T GET THE CONT PALETTE TO OPEN SO THAT i CAN CHOSE A THEME,BACKGROUND BORDER ETC.WHAT AM I DOING WRONG
PLEASE HELP

Duplicate post
See my reply in other post

I live in canada and am trying to sent a clendar to friends in the states but it won't let me change the country in the edit shipping address section what am i doing wrong?

i live in canada and am trying to sent a calendar to friends in the US in the edit shipping address section it won't let me change the country. what am i doing wrong?

You can only ship Apple products to the same country as the credit card used is billed to. So unless you have a credit card with a billing address in the States you won't be able to ship direct.
Happy Holidays

Can somebody please explain to me what I'm doing wrong (RE: PPI)

I have a file that I have rasterized and saved as a PDF, in Illustrator. It's perfect as is, but I want to lower the PPI so the PDF can also be easily sent in an email without it being a large file. (The current file is around 7mb.)
I used the Effects > Doc Raster Effects Setting to lower the PPI, and the only thing that happened is the file size only became few kb less than the original. I tried again, this time lowering the PPI all the way to a measely 7 (can I even do that?), and the file this time managed to get larger than the original. Not by much, mind you, but it's still baffling.
I don't particularly care how I acheive the effect, but I'd like to lower the file size. Also, can someone explain to me what I am obviously not understanding about PPI? Freakin' PPI, how does THAT work?
Thanks!
Jen

esaisquoi wrote:
I have a file that I have rasterized and saved as a PDF, in Illustrator. It's perfect as is, but I want to lower the PPI so the PDF can also be easily sent in an email without it being a large file. (The current file is around 7mb.)
Rasterizing usually increases the size of Illustrator files. A circle, for example, requires very little data to be drawn. There are a total of twelve points, each with X,Y coordinates, a fill, and a stroke. This circle is stored as a mathematically defined path and will always be drawn sharply at all sizes and print sharply at all resolutions. This is called a vector graphic.
When you rasterize it you convert it to a large grid of pixels, each with its own colour value. Even a small circle at low resolution (say, 1 inch diameter at 72 ppi or pixels per inch) requires at least 15,552 bytes of data: 72 pixels across times 72 pixels down times three bytes to store the RGB colour information for each pixel. There is also some data required to identify the type of object (a bitmap graphic) and its position on the page. THis circle will only look good if viewed at a specific size and will always print poorly. It is also much harder to edit since it is no longer seen as a circle with a fill and a stroke in Illustrator. Making the fill a different colour will be extremely difficult. Fortunately for our example, the shape is simple to recreate. This is called a raster image.
In the above example rasterizing has made the file larger, harder to edit, and print poorly. All of these are bad.
Some very elaborate and complex vector graphics may be saved with less data by being rasterized, but these are rare, and they will still be impossible to edit and still print poorly because the resolution of the graphic is fixed. The advantage of vectors is the resolution is infinite. Print on a crummy inkjet and you get the best quality output of that printer. Print on an offset press and you get the best possible output on the press. View on your monitor and you get the best possible display your monitor can produce.
I used the Effects > Doc Raster Effects Setting to lower the PPI, and the only thing that happened is the file size only became few kb less than the original. I tried again, this time lowering the PPI all the way to a measely 7 (can I even do that?), and the file this time managed to get larger than the original. Not by much, mind you, but it's still baffling.
This did nothing. Document Raster Effects Settings applies to any effect in the Effects menu that produce a raster image rather than a vector, which only applies to a few commands. Effect > Stylize > Drop Shadow, Inner Glow, Outer Glow, and Feather are some, as are all the effects below Photoshop Effects. The setting has no effects on anything that has already been rasterized.
Raster effects are effects that Illustrator cannot easily reproduce without using some bitmapped or raster data rather than drawing it entirely with vectors. Effect > Distort & Transform > Roughen, for example, applies some mathematical transformation to the selected paths, so does not need rasterization. But Effect > Stylize > Drop Shadow produces a blurry transparent shadow that looks best if it is a raster. The Photoshop Effects only work on graphics that are already rasterized, so Illustrator rasterizes them in the background first. Document Raster Effects Settings lets you globally define the resolution of all such effects in the document. Higher values produce smoother effects when enlarging or scaling, at the expense of speed and file size.
I don't particularly care how I acheive the effect, but I'd like to lower the file size.
I don’t know what effect you are trying to produce. Use the camera icon at the top of a reply to attach a screen grab of what you have drawn. If this is not exactly what you want, but you can find it somewhere else on the web, post a screen grab of that, too.
Also, can someone explain to me what I am obviously not understanding about PPI? Freakin' PPI, how does THAT work?
PPI stands for Pixels Per Inch. A pixel is the smallest part of data in a bitmapped or raster image. If you never rasterize anything in Illustrator, never use a raster effect, and never rasterize anything, then pixels per inch means nothing to your file because nothing is saved as a pixel. If you rasterize something, import a raster image, or use a raster effect, then you have introduced some feature to your file that cannot be completely defined using mathematical paths. This is instead saved as a two dimensional grid of coloured squares. Each of these squares is a pixel. The more pixels you use to define a graphic, the more detail that graphic contains and the larger the file.
By definition a pixel has no size. But Illustrator uses a physical measurement like inches, centimetres, or points to define the size of everything. This means the pixels in your file must have a size, too. Pixels are not defined by size because one does not manipulate single pixels like they are objects. One generally refers to the density of pixels in a unit of measure. So a pixel is not .0033 inches, or 1/300 of an inch, rather a raster image is defined as being 300 pixels per inch. if that same image is enlarged to 200% its pixels are enlarged, so it becomes 150 pixels per inch. If this is an Illustrator path with a raster effect, the effect is recalculated after the drawing is enlarged and is still 300 pixels per inch, but now contains four times as many pixels (twice as many across, twice and many top to bottom).

HT2515 My cam works fine with every program except yahoo. If I just sign into yahoo or even if I use ichat for yahoo, the webcam button will not highlight up. How can I fix this and/or what am I doing wrong?

Hello, my father recently passed (using his ID) and I took over the payments on his mac and took his computer. I am not that familiar with mac, but am usually computer savy. However, this one has me stumped. I have no problem starting the built in cam and it seems to work fine with all other programs I've tried using it with. However, it will not work with yahoo. Whether I use normal yahoo messenger or if I try using Yahoo through I chat. The cam button will not light up, therefore, it is not clickable. Which ultimately means I cannot use my cam on yahoo, which is something I use 99% of the time compared to other programs. So why is this happening and what solutions can I take to try and fix this? The mac I am using is: Mac OS X, Version 10.7.4
Thank you for any and all help, it is much appreciated.

Welcome to Apple Discussions!
1) If the iTunes preference window is open when you connect your iPod, the iPod will not be recognized by iTunes.
Also, iPods can work with many iTunes libraries, so that is not the problem here.
Is all the software on your computer up to date?
iTunes
iPod Updater
Updating iPod's Software
Does the iPod show up in My Computer when connected to your computer? Does it say Do Not Disconnect?
Try the steps listed here...
iPod shows up in Windows but not in iTunes
If you are going to use your iPod with multiple iTunes libraries (home and school)...
Using iPod with multiple computers
2) What part aren't you understanding. Here are a couple of free programs you can use to convert videos...
MPEG Streamclip
Videora iPod Converter
The programs should come with documentation and instructions to convert videos.
3) You can go to file-->add file to library, file-->add folder to library, or have iTunes open and drag the files into the iTunes library while viewing the library.. You can also import from CDs.
iTunes needs to be adding the songs to the iPod. You cannot just add the song files to the iPod.
btabz

I keep downloading Firefox 4 but the Firefox tab above says I have 3.6 (and I have restarted), so what am I doing wrong?

I click save on the prompt for the download and then run it and see the bar filling up. But nothing, including restarting, makes the Firefox tab on the upper left of my computer say I have 4 rather than 3.6. How can this be remedied?

Did you install it? When you finish downloading it should be a dmg file, if you double-click that it will mount the disk image, and in there you just drag the firefox icon into your Applications folder (it shows you exactly what to do, although you do need to make sure FireFox is not running when you do it)

I installed win 8.1 on my iMac on the bootcamp partition and can't access OSX anymore. What am I doing wrong?

Ever since I installed Windows I don't have an option to switch to Mac.I installed it on the bootcamp partition with the lastest OSX and Windows versions. I did this a few years ago with an older Mac and Vista and remembered a prompt to choose OS during boot. I get nothing but Windows now. Any ideas?

if you restsrt and hold down alt, what boot options do you see
try restarting holding down command+R, choose disk utility and tell me what you see on the upper left hand side under the name of your physical drive

I bought a movie, but I can't find it to watch. I can't even buy another one. What am I doing wrong?

Similar Messages

Maybe you are looking for