I bought an iPhone 5 so i could have the possibility to use the new 4G network here in Belgium, now my provider tells me that they can't give me 4G on my iPhone 5 (any other one yes),they say because Apple blocks the use of 4G on the iPhone's here

After buying a iPhone 5 and iPad mini, and now thinking of buying the 5S and the mini retina, I just changed to an other provider who had a much better deal for a subscription, also one of the first who offers here 4G, now just starting with my new provider and curious how the 4G connection will be, whatever I did I could not get it to work on 4G, now my provider tells me that Apple is blocking all the iPhones here to be able to work with 4G, and they let them work with 4G on only one provider here ( that's very expensive ). I was wondering if this is true or if anyone has the same experience.

The Belgium 4G networks supported by the iPhone 5 are Mobistar and Telenet.  The other carriers's networks have yet to be approved by Apple.    Perhaps their networks are not up to Apple's standards and again, perhaps, the approval will come in the future.
In the meantime, you can only receive 4G services from either Mobistar or Telenet.

Similar Messages

  • I have 3 iphones and sync the first one is ok but if i try to sync any other ones they sync with all with the samy stuff

    i have 3 iphones and syncing the first one is good but if i try to sync any other one is sync up with all the same stuff as the first one

    http://support.apple.com/kb/ht1495

  • Could any one tell me that How can i create the service User ie j2ee SID

    hi all,
    In the implementation of SPNego Authentication schem in my portal system.
    i want to create the service user ie .j2ee-<SID>.
    <b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
    any help will be highly Appretiated .
    thanks and regards.
    vinit soni.

    Vineet,
    the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
    Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
    Regards,
    Shubhadip
    Message was edited by:
            Shubhadip Ghosh
    Message was edited by:
            Shubhadip Ghosh

  • Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.

    Randomly when I plug my Iphone 4s into Itunes it will tell me that it can't detect my phone and that I need to restore it. It doesn't happen every time, but maybe every two weeks.I restore it and then it works for a while, but then a couple weeks later I'll plug it in and I get the same message again. It's very frustrating because even though I have all the settings to save to cloud, my apps and data don't all come back.

    Thank you both. I suppose I should have prefaced my question with the concern that I've read a number of other posts from people who have had a similar issue and when they tried to follow the directions, they ran into a multitude of other problems. As you might imagine, I'm hoping to avoid the creation of new problems as I try to solve this one. Thanks again.

  • TS2755 I can't hear me text message come in if my home screen is locked.  I can only hear it if my phone is on any other screen

    HELP!!!!!
    I can't hear me text message come in if my home screen is locked.  I can only hear it if my phone is on any other screen..

    Hello Trisha0422
    Check to see if Do Not Disturbed is turned on as does not notify with an alert or sound when the screen is locked. Look for the Moon in the upper right hand corner by your battery icon. 
    Set iPhone to Do Not Disturb
    http://support.apple.com/kb/TI6
    Regards,
    -Norm G.

  • I get Singed out of eBay when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in.

    I get Singed out of eBay.com when I bid and when I go to a other item.. I can be on "my eBay" and just click on any other item and boom I'm on a page that says I need to sing in..if I click back it brings me back to "my eBay" and I am still singed in but if I was not to click back and I click on sing in I have a page saying I singed out.. sooo I do the obvious and clean out the cache and so on, disable all and then just some addons and try again and just to be sure I opened IE9 for the first time ever on this year old pc and it works fine so I know the problem is with FF4 but I'm out of ideas so what are my options? I dont wanna have to use IE9 but I need basic stability!!
    I give a A- on the rest of FF4 & that makes this even more annoying because I want to use FF4!! I make my butta on eBay.com so I'm on all day buying & selling so I really need a quick fix or I'll have to make a quick move to Opera or IE9..PLEASE DON'T LET THAT HAPPEN...LOL!!
    Please help me on this one & Thank you in advance to anyone who helps me I appreciate it allot!

    The Get Info. fields show up gray if the files is locked and iTunes knows it can't edit the file. Make sure the files are not marked as read only and, if necessary grant both your account and system full access to all files and subfolders of your media folder.
    You can set Part of a Compilation for multiple tracks from the Options tab of Get Info.
    See Grouping tracks into albums for tips on getting iTunes organized.
    tt2

  • Iphone is dead, gone  to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

    iphone is dead, gone  to insurance co. for replacement. They say because "Find My iPhone" is still active, they can't replace or try to fix it. problem is can't log in to de-activate it, cos email account does not exist anymore. How can I de-activate it?

    You never used your iPhone?
    You never logged into iTunes?
    Your AppleID & Password for iCloud&  iPhone should be the same AppleID &Password you used to log in here and post a message.
    -> Find your Apple ID

  • TS1398 I can't find my wifi name or signal or any other wifi spots and I'm right next to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

    I can't find my wifi name or signal or any other wifi spots and I'm right nepxt to my wifi router box and my iPod isn't detecting my wifi router box I'm my house

    If not:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem.
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar
    Then
    Does the iPod connect to/see other networks? (you were not clear)
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • I'm trying to set up Passbook on my wife's Iphone 4. When I click it it tells me that it can't connect to iTunes, but click on itunes, up it comes. Using iOS 6.

    I'm trying to set up Passbook on my wife's Iphone 4. When I click it it tells me that it can't connect to iTunes, but click on itunes, up it comes. Using iOS 6.

    Go to Settings>General> Time & Date.  Turn automatic time and date off and set it 1 year ahead.  Access passbook and then tap App Store.  Should get about 7 apps that come up that are available to utilize passbook.  Go back into time and date and set it back to automatic.  Should be good to go from there.

  • I installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

    i installed new 6.0.1 os it is done succesfully but after that insterted my sim it is showing sim card not supported any one plz help me

    That message occurs when updating a phone that was hacked to be used with your network.  Upgrading the phone has re-locked it to it's rightful carrier.  You will need a SIM from the original carrier to proceed.

  • How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

    How do I save a website created on IWeb 08 on one computer, so that I can open and adjust it on Iweb 08 on a other computer? pleas help me with this.

    Ernst ~ Welcome to the Support Communities. See this post:
    Editing my iWeb page from another computer

  • Adobe XI when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign

    when i use signature option i try to use rectangle, it gives option of certificate signature, does not give me webcam or digital signature or any other option to sign, have downgraded to Adobe X, no options show. Have upgraded back to XI no change. Free software I am using currently.

    There are two types of signatures in PDF: electronic signatures, which are just images (stamps, text, image) and digital signatures.
    If you want to use electronic signatures in Acrobat XI go to Fill&Sign->Place Signature. If a drag rectangle for the digital signature dialog comes up, you have selected digital signatures and Acrobat/Reader remembered it. Cancel it, go back to Fill&Sign->Place Signature and click a triangle to the left of "Place Signature". Then click on "Changed Saved Signature" and select the electronic signature type you want to use.
    If you want to use digital signatures you can create custom digital signature appearance. Go to Edit->Preferences->Signatures->Creation&Appearance->More. In the "Appearances" section click "New". You will be presented with the dialog that allows you to create a custom appearance. If you want to put there your picture or image of your ink signature, you need to prepare this image as a file beforehand, select "Image" radio button, browse to the location of your image file. In Reader you can use only PDF as your image file. In Acrobat you can use many more file formats: JPEG, PNG, etc.

  • Can I Re-process Idoc from status 68 to any other status?

    Can I re-process Idoc from status 68 to any other possible status?

    Hi,
    You can use this standard program RC1_IDOC_SET_STATUS to change IDoc status 68 to another status.
    Regards,
    Ferry Lianto
    Please reward points if helpful.

  • My left shift key isn't working, and i can't take it in for repair is there any other way

    my left shift key isn't working, and i can't take it in for repair is there any other way

    Sarwahhhh wrote:
    my left shift key isn't working, and i can't take it in for repair is there any other way
    Why not?  If you are under warranty and/or have AppleCare, call them.  Let Apple deal w/hardware problems.  If you mess up, your warranty will be voided!
    OOW:  For DIY instructions check out the following:
    iFixit
    YouTube's “How To” tutorials.

  • HT1420 i can't seem to get my iPad to synch with my new iMac.  The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes.  Any other ideas for how to overcome this block?

    i can't seem to get my iPad to synch with my new iMac.  The iTunes prompt says that this computer isn't authorised although i have registered it on iTunes.  Any other ideas for how to overcome this block?

    What do you mean by 'registered it on iTunes' ? You've authorised your account on your Mac's iTunes via the Store > Authorise This Computer menu option ? And you've copied your library onto the Mac ?
    Copying content between computers : http://support.apple.com/kb/HT4527
    You may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Maybe you are looking for

  • Suggestion on BW Landscape

    Dear All, As our Production of BW goes live 4 month back , Now we have changed our Development team for further reports , But Newly came team say that lot of things are directly done on production , not available in DEV and quality , Our Management i

  • How can I recover bookmarks and files that were lost when Firefox updated?

    This morning, there was a message that firefox needed to be updated. Since I don't like (or use) Google Chrome or IE, I unchecked those options as part of the update. Once the update was completed, all of my bookmarks and folders were gone. Is there

  • IMovie exports large Memory Intensive Files

    I have just started using iMovie08 and find in exporting to QuickTime the size for 15 minutes of Footage is 3.2 GB. Exporting the same file to Share> Media Browser gives a file size of 2.2 Gb in MP4 format. How will I get an hour of clips onto one DV

  • Can you set permissions to be different on 2 USB disks/folders

    I have two usb disks connected to my Airport Extreme and would like to restrict access to each disk separately if that is possible and if it is I would also like to restrict access down to folder level on each disk. Does anyone know if this can be do

  • Availability check of the material)

    Hi PS Gurus, I wanted to know in CJ20N what does u201CEdit Availability  Materialu201D I did select material & Edit Availability  Material; it took to different screen with confirmation proposal with Continue, ATP quantities & scope of check Want