I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
I bought Apple TV3 , it was working fine until today and stopped showing the status light. Please help.
try another cable it's a std cable that most consumer electronic use
if that does not help then I would try to connect it by a microUSB cable to see if I could restore the firmware from a computer running itunes
if that does not help then I would say that the appletv have died
Similar Messages
-
PDF files not being displayed correctly, instead I get a blank screen with some sort of small pinned icon in the centre. It was working fine until today HELP!
What is your operating system? Reader version? Are these local or online PDFs? If online, in what browser?
Can you post a screenshot: https://forums.adobe.com/thread/1070933 -
I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
ChrisMichael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
my itunes was working fine until i tried downloading the most current version of itunes, now when i try to get on my itunes library, it wont boot up and has error codes, error 7, and( windows error 126). it also says that MSVCR80.dll is missing from my computer,please re install itunes. but when I try to re install it it will not install on my computer.
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Help please? I got the Express yesterday and had it set up and working fine. However I found the signal and connection wasn't going far enough/fast enough for all areas of my home I wanted it to. Today I got the Extreme. I unplugged the Express, plugged in the Extreme and set up the new wireless network for that one just fine and it was working great. However, I still wasn't getting quite the connection/speed I wanted through out my house, so I tried to add the Express to extend the network I set up from the Extreme and now neither one is working. I tried resetting and starting over from the beginning but I can't even get just the Extreme to work by itself and am not sure what to do.
The following are the basic steps to configure an extended network with two 802.11n AirPort. Please take a look to check if anything was missed when you configured yours.
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations) -
Hello
I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time ..this has occurred several times on this sytem and and as well as other system this one has window vista 64 bit home prem. why is the itunes not working to burn my disks
it worked fine before the updates to the system and the itunes software is up dated as well...can someone suggest something
thanks for your time in this matter
sadeyesjleeI recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131? -
I have changed nothing on my computer, and it was opening and functioning fine this morning. However, everytime I try to open it, I get a message box saying "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features." And when the page actually opens, it says "Unexpected response from server
Firefox doesn't know how to communicate with the server.
Check to make sure your system has the Personal Security Manager
installed.
This might be due to a non-standard configuration on the server."
Nothing will load and I don't know what's wrong!Did Firefox update to 4.0.1?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]] -
HT201365 cannot activate iphone although it was working fine until today
Hi My phone was off for 3 days when i went to power it up had activation errors unable to back up or restore as find my phone is on and cannot switch it off as phone is stuck on activation erro page and no service to ee provider iphone will not respond to computer from itune web site phone is useless at the moment.
please any ideas?If you were using iOS 7 beta it has expired. If you're a developer go to the Developer forums and downlad 7.0.2. If you aren't a developer you're going to have to find solutions elsewhere. There's a discussion on this here: https://discussions.apple.com/thread/5415804?tstart=0.
-
Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.
How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie -
So I just bought an iPhone 5s and Touch ID was working fine until the software update is that a bug ? Because I don't think my home button broke
Have not heard of that but here is what I would do - test after each step to see if the problem is solved
1. Restart or reset your iPhone, iPad, or iPod touch - Apple Support
2. If that does not work - back up to iTunes and restore to factory settings
3. Check to see if the problem is resolved before restoring from backup -
drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?
Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.
-
my apple tv was working fine untill the AirPlay option disappeared. I haven alterd the settings and have tryed rebooting both iPhone and ipad. I even rebooted the ATV and that disn't work. i am connected to the same network on both devices to. My iPad is up to date but my phone isn't but as I said mirroring and AirPlay worked fine on both devices befor...
Hi F1N5G10,
Thanks for contributing to the Apple Support Communities.
It sounds like you don't have the AirPlay option on your iOS devices. Restarting your Apple TV and iOS devices was a good first step, and you can find some additional tips to guide your troubleshooting at this link:
Resolve issues with AirPlay and AirPlay Mirroring from iPhone, iPad, and iPod touch - Apple Support
Sincerely,
Jeremy -
I've got an apple 3TB time capsule. It was working fine until we moved to a new house. The day the ISP showed up to upgrade my speed it stopped working. Now will not pick up signal. What happened what do I do?
What signal is it picking up? Are you joining wireless network? If so don't.. it is really poor way to run things.
Is it connected to a cable modem? Full router or just a modem type?
Try a reset?
Plug in via ethernet.. turn off everything.. wait 5min then restart cable modem.. if that doesn't work, give it a longer off cycle.. 15min or overnight.
We need more info. -
My iPad was working fine until Tues. Night. I went to go on facebook and it shows a white page like it is coming on the it goes back to the home page. I have turned it off, deleted Facebook and put it back on but it still does the same thing. What can I do?
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario
Maybe you are looking for
-
Charged with installation fee
When I signed up I was promised for free installation. I opted for self installation as I wanted to install it quickly. Somehow I couldn't do it as it was very complex. As per plan, I am offered free installation, so thought of seeking help for insta
-
After security update i dont get a loginwindow?
Like most of us i did the security update and now i am stuck on a blue screen with just the mouse pointer. I started up in single user mode to see what was causing the problem. And it is SecurityAgent that crashed. I have the crash log but i do not u
-
Getting error message after trying to correct for blank folio builder
This is my first app using IDCC6. I opened the folio builder from the document, gave a name to the article that consisted of 12 picture panels (about 12mg) and tried to review on desktop but just got a blank folio builder screen. Then I updated to cc
-
Form modification: Old form appearing
Hi, We made some changes to the existing form layout. In the quality system, sometimes instead of new layout old form layout is coming up. Any idea on why this is happening? Thanks, Aravind
-
Sync contacts from iTouch 1st gen to iPad Air
How do I sync contacts from iTouch 1st gen to iPad Air using Windows 7? 1st Gen doesn't connect to iCloud.