I bought MAC OS X Snow Leopard upgrade (currently on 10.5.8) but the disc keeps ejecting . . I've cleaned it but it still doesn't work. Help!!
OS upgrade disc won't read.
Then you may have a bad optical drive. Does it read any other discs? If it does then the Snow Leopard DVD may be defective.
Similar Messages
-
I purchased the Mac OS X Snow Leopard upgrade. I put the CD in my MacBook and it spits it back out. What should I do?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Does it load other DVDs? -
Hey Guys. I have a 1st gen dual 2.3 powerPC G5. I just recently upgraded my OS to Leopard 10.5. I cannot for the life of me, get FlashPlayer to work. I Downloaded and installed the archived 10_1r102_64 version, but it still doesn't work.
Everytime I click on a video it says I need to update to the newest version of flash, but my computer doesn't support the updated version. So I feel like I'm in a Catch-22.
Any suggestions?Jay, you may very well be up a creek without a paddle.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html
Then Test Adobe Shockwave & Flash Players...
http://www.adobe.com/shockwave/welcome/
If it in fact says you do have 10.1.102.64, & some sites say you need higher, it is a catch 22. -
While installing snow leopard 10.6 on macbook pro, install begins then disc is ejected after a few minutes?
Does the disc look like this DVD?
-
I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.
Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem. -
I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work
I too am having the same problem. I'm glad to know it's not just me
-
Upgraded 5s to IOS8, my iphone has showed no service to days, and I have restart and get the SIMcard regected. Also, I have refreshed my iphone system, but it still doesn't work. So, how to fix my iphone?
Hhave you done a reset press & hold power button & menu button until you see
Apple Logo you will not lose any data.
bsydd uk -
Direct Upgrade from 10.4.11 to 10.6 Using Mac OS X Snow Leopard Upgrade
Can I upgrade my MacBook (Intel Core 2 Duo) directly from Mac OS X 10.4.11 (Tiger) to 10.6 (Snow Leopard) using the retail upgrade version of Mac OS X Snow Leopard?
Apple's site says you need to install Leopard first, then upgrade to Snow Leopard.
Cheers, Tom -
Mac Noobie will Snow Leopard Upgrade Wipe My MAC
Hi,
I am a noob when it comes to macs as I am more of a windows person :o but I have a macbook to. I am looking to preorder for a mac snow leopard upgrade. but I was wondering when you install the new OS will it wipe my harddrive like it would on a pcI preordered myself and am also a noob to Apple computers.
I believe it will be fine because of you read the apple write up is says that it looks for programs that won't run on it and "puts them aside." This statement tells me that it doesn't erase the programs. I hope for you me and everyone else i'm correct. -
Mac Book RAM & Snow Leopard Upgrade Issues
My daughter in law upgraded her MacBook memory to 2 GB and installed Snow Leopard. She has iPhoto 2008. Since the upgrade, any movies imported into iPhoto will not play in iPhoto as they had before. Also, since these changes, any videos she's downloaded have a "jerky" or hesitating transition between frames so people or animal movements are not smooth.
Any thoughts as to what might be wrong and how I can fix these problems?[Try what is suggested here|http://support.apple.com/kb/TS1440?viewlocale=en_US]. No luck? Then I would try installing Sno over whatever is there as if doing an upgrade install.
Message was edited by: donv (The Ghost) -
Sorry, thought that was the body of the question, so the title is long. When I plug in my iPhone 4 (newest update) into my Mac laptop (current version of iTunes, Snow Leopard), it does not read the music, apps, etc., or open iTunes at all. It syncs the pictures, but it doesn't not show as a USB device, either. I have gone through the Troubleshooting assistant, restarting both comp and laptop, using different USB ports, etc. If it is of note, when I look at the option to Sync through Wifi on the phone, it says that sync will happen when my computer (by name) is "available." Not sure if this is a phone issue or laptop, leaning towards laptop, since iPhoto syncs. Willing to buy Lion if that will fix the problem! I would appreciate any help that is given.
Regards,
Lindseycynecasey wrote:
... my computer is still running Mac OSX 10.5, because I don't feel the need to buy a new laptop every 2 years.
You have written a very long story, and I admit I have skipped most of it. But I think the question is you are on iOS 7, and cannot get the latest version of iTunes (11.1.5) on your computer because your OS X is too old.
The fact that you chose not to update your hardware does not mean you could not update your software!
OS X 10.5 is very old (about four years). iTunes 11.1.5 (current version) requires at least OS X 10.6.8 to run. Very likely, you could upgrade your computer's software to at least OS X 10.6.8 and then download the current iTunes on it.
You would start here:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Then you would update the OS X 10.6 to OS X 10.6.8 over the air, then download iTunes (or update to a later OS X, as the current version is 10.9.2). -
Hi
I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
What i see missing in my devices screen in XP is the network adapter.
I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
Thank youI'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck. -
I support several web sites that I developed for clients and I use java script to manage/show slide shows. After upgrading to 8.0 my scripts don't load. When I click on preview on my web development tool my page will not load the java script - nothing shows on te screen. All used to work OK and still works in IE.
Thanks for the response, Karsten,
However, no Divx 5 Component but I did have a Divx Decoder Component and a Divx 6 Decoder Component, so I tried what you suggested anyway with those but to no avail.
Still not working!
Regards,
John -
HELP!!
help with what? you're providing no information.
"it does not work" means nothing. What specifically is the problem? -
Flash drive with mac os x snow leopard in it..
Hey, my name is jason, i have a big problem right now.... see i bought mac os x snow leopard two weeks ago, i was with my my grandmother, and i decided to use my usb 8bg to save it just in case i lost my installation cd, well i lost it and now i only have my USB with mac os in it, So i tried to install it and i couldnt it said that the installation cd can not be used from this volume... Please help me i need help! i need to install snow leopard
You apparently did not properly install the SL DVD onto your flash drive. You will have to find the lost DVD or buy a new one.
Maybe you are looking for
-
Why do I get a memory leak when I use the Write Data Storage VI in a loop
I have a large application that I am collecting various data points from. For the most part they are simple scalar values that need to be logged on a regular basis. I was attempting to use the new TDM files and the storage VI's I though everything
-
Drop zone of loop in the film stip template, works in simultor, not burning
Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there? t
-
Hi, Has anyone got experience of creating a script to promote Master Data Services changes from one environment to another, e.g. Development to Production please? The changes basically consist of adding several new MDS members which can be accessed v
-
i have a document print in which i have two columns, first column is image field (refering to a file in the local machine), second field is a normal text column, if the 1st field is null then i want the second column to move to the left, i have set b
-
Hi, We are facing some problems on our Datacanter but it is very hard to determine it is related to server or network device. We are looking for a software or appliance that collects all or part of the traffic with SPAN and analyse the traffic. Do yo