I bought my mini Ipad the first days of December.  Now I cann´t use it because it shuts down everytime I use an application.

I bought my mini Ipad the first days of December. Now I cann´t use it because shuts down the applications.  I would like to know how to proceed?

Hello valecasafont,
Congratulations on your new iPad mini!  I would be concerned too if my iPad was unexpectedly powering off.  I found an article with steps you can take when you encounter an issue like this.  I recommend following the steps below (these steps refer to an iPhone, but the steps also are relevant for an iPad):
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Similar Messages

  • RSD the first day i got my macbook, am i the unluckiest or what...?

    first, my order was delayed for THREE WEEKS!! then the day i got my computer, RSD occurred. all sorts of random shut down too, the shut down without any message, the message of multiple languages to restart, and the fact that i can't even turn it on for a long period of time after RSD occurs.
    it seems that RSD happens to people after some time, but mine happened the first day i got my computer...

    I'm sorry to hear that your macbook RSD the first time you got it. That *****! Did you get the Black Macbook or the White? I just got my Black Macbook from Ebay and I only paid $1,100 for it and it had 2ghrz processor and 2 gig RAM. The person I bought it from, got it in the middle of June so it still have 9 months of warranty. It works great no RSD, I hope I never get it 'cause I am using it right now and it works great! I am loving it! The first day I got it, I used it all night until the morning and did the yes test to see if it will RSD. It never RSD so I hope it will stay this way at least up to when I am ready to buy the new model of macbook. Hopefully in two years.

  • On my iPad 3, how do I make calendar items lasting more than one day appear as such on the monthly view of my calendar? Right now only the first day of the item appears.

    On iPad 3, all of my calendar items lasting more than one day do not appear correctly when looking at the monthly view of the calendar; only the first day of the appointment appears. For example, if I am taking a vacation for 4 days, only the first day of the vacation is marked on the calendar, instead of being listed on all 4 days. When I look at the weekly view, however, it is correct and is listed on all 4 days. The problem here of course is that at a glance, there is no way to look at my monthly schedule. On my iPhone, everything is correct, regardless of month or week view, so clearly this is an iPad problem I guess? Please advise on how this can be corrected. Thank you!

    Unfortunately you can't do what you want. Many people have complained to Apple about this. I suggest you provide Apple feedback directly at http://www.apple.com/feedback/macosx.html. They will not provide a direct response but hopefully if enough people provide feedback Apple will fix this.

  • We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. N

    We have two iPads. mine is the first one purchased. I opened iTunes to put some photos from the Mac to my wife's iPad. I plugged in my wife's iPad.  Both ipads have the same apple id and password. iTunes synced everything from my iPad to my wife's iPad. Now we have two identical iPads looking like mine. Everything on her ipad seems gone and replaced with mine, all her recent holiday photos, emails, settings, etc etc seem gone. 
    I'm toast!
    Help!!
    LJ

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How to Share a Family iPad
    http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
    Using iPhone, iPad, or iPod with multiple computers
    http://support.apple.com/kb/ht1202
    iOS & iCloud Tips: Sharing an Apple ID With Your Family
    http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • I've bought a few songs recently and they played the first day but now it says that i need to Authorize my computer with is already authorized How can I fix this?

    Ive bought a few songs recently and they played the first day but then when i go to play them again it say i need to Authorize the computer which is already authorized I don't understand can someone help me??

    Hello there, HelpMePlease117.
    There is a good Knowledge Base article that helps resolve authorization issues you might want to look over:
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/TS1389
    Any one of the steps listed there should help you get to the bottom of your issue and resolve it for you.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • I'm trying to use my iPad mini for the first time with a previous apple ID and password but it will not connect to iTunes but I can download apps from my iPhone using the same appleID and password and it works on my iphone...PLEASE HELP NOW

    I'm trying to use my iPad mini for the first time with a previous apple ID and password but it says "iTunes is not working try again"...it allowed me to download an app on my iPhone using the same apple ID & password but all my apps are in "Waiting Status" on my iPad mini because it says "iTunes is not working"...PLEASE HELP ME NOW!!!

    Previous user installed iOS 7 beta on that iPhone.
    Take it back and get your money returned. You
    are running into a new security feature. Whoever owns
    the ID that it is asking for is the only person who can
    remove the security. That iPhone is worthless to you.

  • Bought a mini IPad, how do i activate the Att cell service i paid for?

    bought a mini IPad, how do i activate the Att cell service i paid for?

    http://support.apple.com/kb/HT4157
    Regards.

  • Mini mac will not register my digital camera. It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

    It connected the first day and I was able to upload some video; however, I pulled the USB out--there was a bad message--and I cannot get the mac to register that I plug it back in.

    Have you downloaded everything that is on the camera? If so format the SD card on the camera (will erase everything on the card).
    If you have not downloaded everything can you see stuff on the camera? If you have a card reader you could try putting the SD card in that and trying on the mini. If your mini has a SD card slot you could try that.
    In any case format the card on the camera before taking more pics.
    Next time be sure to eject the camera from the Mac properly and turn the camera off before disconnecting.
    EDIT: You might also check the camera's USB Mode is set to PC.

  • Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

    Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?  I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
    Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
    This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

    Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

  • I have just bought a mini ipad for my daughter set it up in my apple id so she could keep all her apps games etc, how do i set up a seperate account for her ipad and also keep my own id @

    I have just bought a mini ipad for my daughter and used my apple id to set it up for her so she can keep all her apps and downloads of my ipad that she was using, i was wondering how do i give her, her own apple id so that she can keep all her apps and then i can two seperate accounts ?

    You cannot transfer the purchases to another account. What she has purchased with your account will always be tied to your ID. That's the way that it works. You can have her create her own Apple ID to use with Cloud account, FaceTime and Messages.
    But if you create a new ID for her, she will have to flip flop between the two Apple ID's in order to update apps, and if she wants to make purchases with her own ID, you also have to consider the fact that she may run the risk of locking herself out of her own ID by downloading a past purchase using your ID, after she starts buying with her own ID.
    Read this about associated devices in iTunes.
    http://support.apple.com/kb/HT4627

  • Setting the first day of the week

    Hi,
    Is there any other place in Mac OS X where I could set system's first day of the week, except iCal? In iCal it's set to Sunday, but in OmniFocus mini calendars show Monday as the first day of the week, although even there in OmniFocus preferences I've set it to use Sunday as the first day of the week. Developer says that OmniFocus is using system's settings, but nowhere in my system (except iCal) I can find where I could set the first day of the week. I have set English as the default language and order of list sorting in the International settings. Any ideas or suggestions?

    Unless it is set with the Country in the International preferences, I don't think their tech support knows what they are talking about. However, if that is where it would be set, you should be able to override it with the custom settings, but you can't.
    I'd ask them to tell you where that gets set, or is stored. Ask them what system call is used to get that value. My guess is they won't be able to tell you.

  • Sunday as the first day of the week in month view on the iTouch

    Does anyone know how to change Sunday to the first day of the wek in the month view of the calendar on itouch?
    BTW, I have selected Sunday as the first day of the week in ical on my imac which syncs the ipod itouch. Am I forgetting something or is there a hidden preferences page?
    Tom

    TLGreen58 wrote:
    Does anyone know how to change Sunday to the first day of the wek in the month view of the calendar on itouch?
    BTW, I have selected Sunday as the first day of the week in ical on my imac which syncs the ipod itouch. Am I forgetting something or is there a hidden preferences page?
    Tom
    Hi,
    OMG! How bizzarre, another quirk of the "Region Fortmats" setting.
    *Settings > General > International > Region Format*
    If I set mine to U.K. (where I happen to live), Monday is apparently the first day of the week on the calendar and I have no 12/24 hour clock option.
    If set to U.S., Sunday is the first day and the 12/24 hour clock option is available.
    I guess changing the Region is your answer.
    How odd! Not to say irritating.
    Dud.
    Message was edited by: Duddo

  • I want the minimum of the horizontal axis to be the first day of the month.

    I have a situation where I want the minimum of the horizontal
    axis(with date time axis) to be the first day of the month. I
    attempt it like so:
    var max:Date = new Date();//current date is our max from
    which we will calculate the min
    var min:Date = new Date(max.fullYear,max.month,1);
    dateTimeAxis.minimum = min;
    However this first date on this axis is the last day of the
    previous month for example 31 August instead of 1 September. Any
    ideas how to fix?

    Nikos, the only thing I can think of (off hand) is that it's
    defaulting to "zero" hour on that date, if you tried:
    var min:Date = new Date(max.fullYear,max.month,1,13);
    Would that make it work? That would set the date to 1pm.
    Have you considered defining the axis with the data you are
    binding to?
    Cheers,
    David

  • HT5479 My brand new ipod nano is no longer connedting to my brand new jbl wireless speaker. It worked fine the first day and now either cannot find the apeaker or the connection "fails."  Any advice?

    I bought my dad a new ipod nano and a jbl wireless speaker from the same apple store. Everything worked perfectly with the bluetooth connectivity the first day. Then my dad accidentally hit the "forget this device" button when he was trying to turn the bluetooth off. Now the nano either does not recognize the device or it will recognize the device but not connect. I would appreciate any advice.

    Does it charge on a computer? Does it appear in iTunes?
    If so:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          
    Also see:
    - See:      
    iPod touch: Hardware troubleshooting
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.

  • Broken on the first day HELP

    hello have just bought a iphone 5 and in the first day the lock button has jammed down what can i do please HELP  many thanks declan

    It's under warranty. Take it back.

Maybe you are looking for

  • Availablity check at storage location level in STO

    Hi,   There is an unique requirement from my client with respect to the Availability check at storage location level in STO Process:   Based  on the inputs from APO we are creating STR for moving the material from one plant to another plant. These ST

  • Transfer Game from Iphone 3GS but data lost

    Hi I have the iphone 3gs and my husband kept stealing it to play an online game so i bought him a iphone 4 however when we synced the phone it sent him back to the start of the game is their anyway of him transferring the game including all his games

  • Getting "Protection Error" msg due to same serial number on network

    Hello Finale Cut Studio users, I've run into an annoying problem here and I was wondering if anyone else has dealt with this issue who is working in a similar situation as me? I take care of eleven student iMac workstations, all of which are exact cl

  • Decide which event was started

    Hi guys, I'm working on a workflow for vendor master data. It starts when a vendor is created or changed. This occurs in a 3rd party application but the information is passed on to R/3 without problems. However, I would like my first decision step to

  • HT4061 how can i reset my phone when my home button isnt working ?

    My phones home button hasnt been working for a few days. I tired installing the new software but now its stuck on a loop trying to switch on then saying connect to itunes. I've tried restoring it on itunes but that is giving me the error message (319