I bought the Laser Jet CP1525. It would not install the wireless. Told me to contact HP support

After 99% completion, the install program signaled an "Error" and asked me to contact HP support. I tried first to install the wireless connection wirelessly, but the HP program could not detect my wirelsss system. It then asked me to use the USB port and set up the wireless system with the cable that comes with the printer, which I did. I tried twice (30 minutes each time) and, in the end, received an same error term with advice to contact HP Support.

Try contacting iTunes support and ask, we are just fellow users on here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

Similar Messages

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

I just bought a laser jet M1217 MFP and I wasn't able to enable the web services

Hi Aloolaab,
I understand that you're trying to enable web services on your printer. I would try the steps below.
1. Open an internet browser type printer's IP address.
2. Should bring you to the printer's status page.
3. Select networking tab at the top.
4. Left hand side select Network Identification.
5. Under DNS address Configuration select Manual DNS Server.
6. For Preferred enter 8.8.8.8
7. For Alternate enter 8.8.4.4
8. Select apply. You might get a warning saying this could interrupt connection that's fine.
9. Turn printer off for about 30 seconds then try again.

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data is not.) but

I bought Numbers because my Excel files would not work with Mavericks. How can I import a non-functioning Excel file into numbers? (As of now, the file NAME transfers but data does not.)

HI Dave,
I'm surprised you get no message when you attempt opening the Excel document in Numbers.
I'm assuming Numbers 3.1, since you are running Mavericks.
Does the Numbers file that opens show any content?
Does it contain a table?
How large?
Does it contain more than one tab (indicating more than one sheet)?
Do those other tabs contain a table?
Have you checked those tables for data content?
There have been cases in the past of imported documents opening with white text on a white background, giving the appearance of containing nothing. Check for this by selecting a block of cells, then applying a Fill colour or a Text colour using the Format button (paintbrush).
I'd also suggest attempting to open the Excel files using LibreOffice, which can be downloaded from the linked website.
Regards,
Barry

Laser Jet CP1025nw: Duplex printing not available from Mac

I just bought a new HP Laser Jet CP1025nw printer and have installed it for wireless use. When trying to print from my Mac (OS X 10.9.3) the option for (manual) duplex printing is not showing up (greyed out) in the print dialogues in applications (e.g. Microsoft Word, Adobe Acrobat Pro).
How can I get duplex printing workingfrom my Mac?
Thank you!
This question was solved.
View Solution.

Cool! That worked for me! Thanks!

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

Moved Itunes to an external drive. When prompted to update versions, the download would not install, now I get an error message indicating file msvcr80.dll is missing.

I moved my ITunes to an external drive. Whe I was prompted to run the update for a new version of Itunes, It downloaded but would not install. now when opening Itunes I get an error message indicating the file msvcr80.dll is missing. How can I restore this, and e

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I have bought the wireless keyboard for my iPad. I was working for a day but now the power light won't stay on and as such won't connect to the iPad. I have changed the batteries but still no difference.

I have bought the wireless keyboard for my iPad. I was working for a day but now the power light won't stay on and as such won't connect to the iPad. I have changed the batteries but still no difference.

Not knowing which wireless keyboard you bought, it is difficult to be specific. but ...
it is quite normal for the keyboard's power light not to stay on - it is a way of conserving battery power.
Try this:
turn you keyboard off
on your iPad go to Settings > Bluetooth
if your keyboard is listed under Devices, then touch the little blue i to its right and choose Forget this Device
now reset your iPad: hold both the Home and Power buttons down for about 10 seconds until the Apple logo appears, let go promptly when the Apple logo appears and wait another 30 seconds for your iPad to turn itself on
After your iPad is back on again go back to Settings > Bluetooth
now turn your keyboard back on and see if it appeard under Now Discoverable
if it doesn't read your keyboard guide to figure out how to put it into Discovery mode
touch the listing for your keyboard under Now Discoverable, it should now appear under Devices
touch the listing for you keyboard under Devices, and choose to pair with it.

Office jet 4500 would not install by their directions on web on Mac computer.

I just talked with support for HP. They wanted $25.00 to fix my problem because my software update on Mac to Maverick made my cd obsolete. Driver would not install correctly by following their web instructions. Neve buy another HP product

Hi,
Kindly go to this link and see if you can download the drivers for your printer
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&jumpid=reg_r1002_usen_c-001_title_r...
Select the OS from the dropdown menu and check it out
Thanks
I am an HP employee, these posts are according to my knowledge and HP is not responsible for it.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution
I work for HP.

HT1918 I bought something with a credit card and it told me to contact iTunes support to complete the transaction. What do I do?

I bought something with a credit card and it told me to contact iTunes support to complete the transaction. What do I do?

Use this Link to contact iTunes Store Support for your issue...
Apple Support iTunes Store Contact Us

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

I am on Windows XP. Updated to latest iTunes but it would not install. Tried again and the system hung. I did a restart and iTunes had completely vanished from my system. Tried to do a new install but it won't finalise. Can anyone offer any suggestions?

OK, lets do a complete overhaul to make sure it's working ok.
First to check your Windows system file for any corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer.
Start iTunes and see if it is ok.
If it doesn't, will have to go through the whole process of uninstalling and installing acccording to the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
(Referenceinstructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components)
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

BootCamp made for Windows Vista would not install in WIndows 7

Hi,
I am trying to install Bootcamp drivers on Windows 7 with the Mac OS CD that came with my Intel-based iMac. The problem is that I bought my iMac when the latest Windows was Vista, and it would not install on Windows 7. The Bootcamp drivers for Windows 7 on Apple Support pages are "UPDATES" that require BootCamp 3.0 already installed in Windows. However, I cannot install BootCamp 3.0 in the first place, because it would be installed only on Vista. What should I do to have BootCamp installed on my Windows 7 so that I can set the default booting OS to be Mac OS again?

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
Boot Camp: Installation and Storage
Dah•veed

I downloaded newest itunes version and it would not install properly and now i can't open it. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. anybody having this problem.

i downloaded newest itunes version and it would not install properly and now i can't open itunes. i have removed and reinstalled several times. i get error 7 (windows error 126) something about apple mobile device failed to start. what can i do to fix this problem besides restoring system to an earlier date

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I attempted to download ITunes up date 11.1.4 and it would not install. Got two error messages, error 7 windows error 126 an "privileges. Also meesage that msvcr80.dll was missing. Would like help.

I attempted to download itunes up date 11.1.4 and it would not install. Received the following error messages: error 7 windows error 126 and "privileges. Did uninstall itunes , but could not ger new download. What do you suggest?

Hello, Jack.
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

Upgrade would not install (3.6.8) error message Licence file for this version could not be found

The latest upgrade 3.6.8 downloaded but would not install. Error message read "the licence file for this version could not be found.". Visit Firefox homepage for more info
== I tried to install the latest Firefox upgrade. Have tried about 6 times

It can also help if you delete the Firefox program folder (C:\Program Files\Mozilla Firefox) before installing a new full Firefox copy.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that are locked in any way.
You can skip the step to create a new profile, that is not necessary for this issue.

HT5022 Airport Utility 5.6 would not install

Airport Utility 5.6 would not install on my MacBook Pro with 10.7.5 (Lion): "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance." Hello, Apple?

Use the workaround described in this thread: How do I configure an Airport Express when I get this message in Airport Utility? "This version of AirPort Utility doesn’t support this base station."
Pay attention to the caveat in the final paragraph, restated here for emphasis:
Keep in mind that Apple's decision to abandon support for your original AirPort Express was for reasons known only to them. Remember that you are using obsolete equipment, should some future OS X feature not work for you.

I bought the Laser Jet CP1525. It would not install the wireless. Told me to contact HP support

Similar Messages

Maybe you are looking for