I bounce in AAC - and no file appears!?!?

This is insane.
I check AAC in the bounce area - I tell Logic where to put the file... and the file isn't there!
I'm going nuts! Can anybody figure this out??
Thanks!

Is it automatically imported into iTunes?
Maybe it is there. Mine go ther automaticaly, into my own "logic songs" playlist.
Cheers
Or you can do the AAC convert after exporting from Logic as an AIFF or WAV file.
Cheers

Similar Messages

Camera raw and DNG files appear as generic icons

Camera raw and DNG files appear as generic icons instead of image previews (Bridge CS5)
What can I do ?

Hi Yammer.
First thanks a lot for taking your time to help me. I am really happy about it!
I will try to answer:
1)
I meant by having the Camera Raw.8bi placed in BOTH "C:\Programmer\Adobe\Adobe Bridge CS5\Plug-Ins" and in C:\Programmer\Fælles filer\Adobe Plug-Ins\CS5\File Formats" the ACR will be found in two versions - or rather in two places (I know the former shouldn't be, but it solved my preview problem).
2)
YES - I do have tried twice starting the Adobe Bridge holding down the Ctrl-key and ticking the two (the third was greyed out but ticked anyway) and with no help.
3)
I have tried to do the *.8bi search you suggested, and this gives me the following dump - absolutely with a few more entries than yours. Some are like doubled.
Do you think I can just delete these?
Kind regards, Jan

What are these mp4._00_ and .aac and 5TIuwq files from?

I'm going through folders of old video projects and came across mp4._00_ and .aac and 5TIuwq files and they are between 5.3 and 5.8GB. I'm not sure if these are just some temp files? Anyone know? They do not seem to open up.
Thanks.

You need to delete Bitdefender from your Mac. It will cause you nothing but problems.
Removing Bitdefender Antivirus for Mac
The best way to prevent malware from being installed on your Mac is to enable Gatekeeper.
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

Difference between AAC and m4a files, converting from AAC to useable format

Does anyone know the difference between AAC and m4a files? iTunes has an option to use an AAC encoder to compress CD files, but this creates an m4a file not an AAC file. I just got some actual AAC files and iTunes cannot read these, is there a way to convert from AAC to a format that iTunes recognizes? Thanks

iTunes uses AAC data wrapped in an MPEG 4 container file. If you got some *.AAC files, and they're just raw AAC files, then you need to wrap them in an MPEG 4 container. The only way I know to do this is using the foobar 2000 program. You can find more information at http://www.hydrogenaudio.org and http://www.foobar2000.org

Media Encoder rendering MP4 files with AAC and M4V files leftover

Hey all,
Just a quick question. My computers' media encoder has started rendering mp4 files and leaving the m4v and aac files there once the render is complete. The mp4 is fine but it's a bit anoying and messy that it's not deleting the files afterwards. Anyone familiar with this issue?
Thanks

Sorry my computer AND media encover version. I run Creative Cloud on a new Mac Pro
File seems to render fine
Log info:
- Source File: ***
- Output File: ***
- Preset Used: Match Source - High bitrate
- Video: 1920x1080 (1.0), 25 fps, Progressive, 00:00:42:17
- Audio: AAC, 320 kbps, 48 kHz, Stereo
- Bitrate: VBR, 1 pass, Target 10.00 Mbps, Max 12.00 Mbps
- Encoding Time: 00:13:13
04/27/2015 03:55:51 PM : File Successfully Encoded
No errors reported.
And this is what I end up with.
Is that helpful?

"common" and "client" files appear in ADF with "remote" turned off.

We are getting files created in our business component directories that we specifically ask JDev NOT to create. We are using ADF/UIX, and all are running in the same application server. In our Application Module Editor, we do NOT enable the "Remotable Application Module", and really have no need for the "common" and "client" interfaces. There is really no rhyme or reason to what files are created, and when changes are made to the Entity or View objects that the files deal with, the "common" and "client" interfaces are often not changed, and errors are generated on compile.
Anyone around that can tell me how to disable the creation of these files?

Hi Scott,
Thanks for using Apple Support Communities. The Remote app does not appear in the iTunes library; instead, the iTunes library appears in the Remote app which you can then use to manipulate that library. This article has some information that might help:
About Remote app for iPhone, iPad, and iPod touch
http://support.apple.com/kb/ht1947
This page also has some additional information:
Apple - Apps - Remote
http://www.apple.com/apps/remote/
Cheers,
- Ari

.dll and .tgz files appear seemingly at random...

Does anyone out there know what the purpose of these files are?
lsprst7.dll
sysprs7.tgz
They seem to appear sporadically in premier pro project folders every now and then. (I often use Photoshop in conjunction with PrPro. Just thought I'd throw that in).

Jeff Bellune wrote:
Attempting to shed some light:
I found that files named lsprst7.dll, tmpprst.dll and lsprst7.tgz are created in various places on my hard drive. What's the matter with them?
These files are part of the persistence layer of the licensing component used by SparkMaker. Usually these files are created once in the
%WINDIR%\system32 folder, if the user has local administrative privileges. If the user does not have local administrative privileges, these files might be created in the directory containing the Office document you have opened. In order to change this behaviour make sure SparkMaker is executed once from a user having administrative privileges. This user should have write access to the %WINDIR%\system32 folder.
You can extrapolate that information to apply to your system(s). I suspect there is a piece of software on your system that uses the same licensing component as this SparkMaker (or as SafeNet) and that is what is generating the files. These files have been discussed here before, and SafeNet was one likely source of the files. Regardless, it's not Pr or any CS5 suite app.
-Jeff
That's what it was looking like to me too. But Todd_Kopriva seemed to shoot that theory down (reply #8). Hopefully he will elaborate on what their actual purpose is, what is creating them and why.

HELP! Logic Pro bouncing EMPTY MP3 and AIFF files..

Hi everyone.
I've recently installed Logic Pro 8 onto a new Mac Pro. Entered the code and did a full session recording. But when I go to Bounce the track it goes through the process but then when I look at the Bounced track it is blank :s
I have tried both Mp3 and AIFF bounce and sending them straight to iTunes, but no luck.
Any ideas?
The only other thing is that I have not yet Registered this Logic online as the Mac hasn't got a connection yet. Could this be the problem?
Cheers for any help.
Barka

There is another possibility.
If, like I do, you are using ANY outboard or DSP FX (UAD-1 for example), or are using an interface with a DSP mixer that you are routing through (Metric HALO, for example), then back to your Logic 2-Buss (Out 1-2), you will need to check the real time check-box on bouncing dialog, and let the project sum in real-time.
Does this make sense?
Kind Regards,
Mark

.AppleSyncInfo and .dat* files appearing in Favorites folder in Windows

I've seen a complaint similar to mine posted in the iPhone forum. A list of files with names like ".dat028c.373", together with a single file called ".AppleSyncInfo" is scattered throughout my Favorites folder and is beginning to interfere with my use of Favorites. I can only conclude that this is linked to my syncing my ipod touch to my windowos computer. As someone who is starting to switch over to Mac's, I find this terribly disturbing. And please don't tell me that this is keyed to using Windows. I don't even ask for automatic sync with my ipod. So, what's this stuff doing in there? And how can I prevent it in the future?

Peter,
You can safely delete all the files in \Adobe\CameraRaw\Cache they are (or were) used just to generate previews of your raw files, not to store edits. When you delete the cache, PSE will (or would) regenerate the cache on demand, as needed, to generate thumbnails. But there is no other impact on your photos or catalog.
Depending on your option setting, the edits to your raw files are stored either in the XMP sidecars or in the ACR database, which is stored in \Adobe\CameraRaw\Database.
Last year, many of us noticed that ACR in PSE 6 was using the ACR cache, and then at some point it stopped using it. An Adobe engineer on the Adobe ACR forum claimed that Elements never uses the cache, but that was clearly wrong for many of us last year. However, my current PSE 6/ACR 4.5 and PSE 7/ACR 5.1 dont use the cache, so I suspect some other version of ACR was buggy with PSE and used the cache. Version 4.5 was released 7/28/2008, and perhaps 4.5 fixed the cache bug with PSE, and perhaps you updated to it soon after, which would explain why your last cache entry is dated 7/26/2008.

Migration Assistant issues and losing files (Mt. Lion on new hard drive)

I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over Leopard and Snow Leopard previously, and did not rewrite the drive before I did that.)
The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
Thoughts appreciated.

I just, by either dumb error or providence, migrated the contents of my backed up hard drive, which has my Mt Lion and all applications folders, to a new hard drive. The old and original drive on my 2008 Quad Mac Pro was starting to worry me. All of the applications and systems files appeared to have migrated flawlessly, and my calendar updated and my 20,000+ emails were restored. All of the programs/applications work. Everything appears normal, except data and obvious missing files. (Note I had installed Mt. Lion over Leopard and Snow Leopard previously, and did not rewrite the drive before I did that.)
The size of this new drive is substantially less than the last one. On the latter, I counted more than 50 gigs of data, on the volume with all of the primary OSX documents. That is what I see in the Time Machine backup right before I did the Migration Assistant. The size of the same volume on the restored new hard drive that has my OSX is about 31 gigs.
I did NOT run (by accident and perhaps curiosity) the Time Machine restore backup using disk utilities. Again I did, by accident or curiosity) Migration Assistant.
What does appear lost are all of the Windows documents that were accessible on my portioned drive on my old hard drive, accessible only via VMWare. (I had all of those previously backed up, brute force, before doing this, and I'm not worried if I don't access them now since I have them if I need them). This was about 18 gigs of data I guess.
Does anyone else have experience with using Migration Assistant and losing files that may have been on a partitioned drive (running Windows) and accessible by VMWare? I can still rewrite over the new drive I just formatted and do it all over again using disk utilities and running this from a boot jump drive I created before, but this time using Restore/Time Machine. I just had heard from one source it was best to download Mountain Lion first, and then do a Time Machine restore, which I ended up actually not doing.
Thoughts appreciated.

Why do more empty, localstore.rdf and perf.js files appear in my profile everytime I open and close Firefox?

I have hundreds of empty localstore{xxx}.rdf and perf{xxx}.js files in my profile folder. Where {xxx} denotes a number. New, higher numbered files appear every time I open/close firefox. There ate two pref files (perf.js and perf1.js) which are not empty. There is one localstore.rdf file which is not empty. All other files are zero byte files.
Also, my toolbar customizations will not stay put. I have to re-customize the toolbar regularly. Erasing all of the localstore and perf files in case of a corrupt file does not help.

That suggests something is preventing Firefox from modifying those files. This usually happens when anti-virus software keeps a lock on the files.
''localstore.rdf'' is the file that keeps your toolbar customizations. Since Firefox can't modify it, your toolbar customizations are lost.
* [[How to fix preferences that won't save]]
* [[Profiles - Where Firefox stores your bookmarks, passwords and other user data|What information is stored in my profile?]]
A less likely cause is a Read-Only attribute or permissions issue.
* [http://windows.microsoft.com/en-us/windows/what-are-permissions What are permissions? | Microsoft Support]
* [http://windows.microsoft.com/en-US/windows-vista/What-is-a-read-only-file-or-folder What is a read-only file or folder? | Microsoft Support]

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

File appears different in arrange window and sample editor

I received a few AIFF files from someone Im working with: 24 bit, 44.1, same as I use. However, although they show up fine in the sample editor, in the arrange window they look clipped, as if they've been recorded too loud. This is making them very hard to edit. I've tried refreshing the overview in the sample editor, but with no success. Has anyone got any tips?

Does the file appear distorted visually, or does it also sound distorted?
In arrange, between the *Horizontal Zoom Slider* and the *Horizontal scroll arrows* you'll see a Waveform button with which you can adjust how "fat" the waveform is displayed. Clicking toggles it between the last setting and fully zoomed out. Clickhold to let the slider pop up.
!http://farm6.static.flickr.com/5179/5407362168_6d8e888c2a.jpg!

How do I transfer PDF files from PC to IPAD using Itunes 12.1.2. Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook but can't get it to work in latest 12.1.2 version.

How do I transfer PDF files from PC (Windows 7) to IPAD using Itunes 12.1.2. I would like to do files manually rather then auto synch. Previous versions let me drag file in Itunes to Ipad and files appeared under Ibook and then I could move them to an appropriate collection title. The interface appears to have changed in the latest ITunes version and I am not sure what the proper procedure is.

King_Penguin - Thanks it worked perfectly. I had my pdf files copied into ITunes on my PC but when I clicked on a pdf file to copy it I thought the sidebar would appear with my IPAD name and then I would drag it over. I didn't realize that I needed to click-and start dragging it towards the left-hand side for the sidebar to appear. It worked like a charm - THANKYOU!!!

When I try to attach my css style sheet Dreamweaver gives me an error saying that my .css file appears to be an .html file and will not attach. How do I fix this so I can attach my style sheet?

I have built a css style sheet in Dreamweaver. When I try to attach it to my html website, it prompts me that my "css file appears to be an .html file and cannot attach". I've tried removing the /* */ as suggested by other forums, but this has not resolved the issue. I was using css style sheets with no problem 2 days ago. Now I get that error message. How do I fix this so I can attach my style sheet?

What does the code of the CSS file look like?
An external CSS file needs to be written in CSS only (no html tags like <html>, <body>, <head>, etc ).
It also must have a .css file extension, if yours has a .html extension it won't work.

I bounce in AAC - and no file appears!?!?

Similar Messages

Maybe you are looking for