I broke the M and W key cap on my MacBook Pro

I broke both of the keys they wont stay on when i press on the bottom left corner of them. What can I do about this?

Order new keys? Try Replacement Laptop Keys.
Good luck,
Clinton

Similar Messages

"Home" and "End" keys in FCP on MacBook Pro (2008/09)

I just started using my new MacBook Pro 17. While I was in FCP and tried to move the playhead to the "Home" position, I realized that my keyboard doesn't have a "Home" or an "End" key. What keys/functions do I need to use in this case? When I tried to look up the solution online, I found a forum in which someone suggested "Command/Arrow Key" (up for "Home" and "down for "End") but that didn't work.
Thank you!

On my macbook pro hitting function (the "fn" key) and the left arrow works for home, and function and right works for end. My laptop is a few years old, but I'd assume it's still the case.

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. don't need the caps/lock or ctrl key and due to an injury my daughter can only use her left hand to type. She is using a text to speech app to verbaliz

I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini. I don't need the caps/lock or ctrl key. Due to a brain injury my daughter can only use her left hand to type. She also uses a text to speech app to verbalize all of her needs since her speech isn't intelligible any longer either. And her vision was significantly affected also, so the keyboard has to be mounted about 6 inches from her face. So to reach across the keyboard with her left hand to the right side delete and enter button is physically difficult and causes typing errors, which cause people to not understand what shes trying to say.
The best keyboard so far is the Zagg folio mini. I just had to make stickers to enlarge the letters on the key buttons.
Does anyone know how I can reprogram these two keys? Or where I can buy a wireless mini keyboard for Ipad made for lefthanders with these two functions on the left side. I have searched for days and days. It's sooooo important to me that she be able to contribute her voice again. Imagine if you got in a car accident and couldn't speak clearly any longer, but understood everything still. Thanks for any help and suggestions you all take the time to share with me. I really appreciate the kindness of strangers to help me help my daughter.
Sami's mom

Sami\'s mom wrote:
I need to reprogram the delete and enter key to the left side of a external keyboard for the ipad mini.
You cannot.

How can I use the F14 and F15 key for a shortcut?

Hi folks,
I've been trying to assign custom shortcuts to the F14 and F15 keys of my keyboard (wired, full sized type) on my Mac Pro 2008 running Mac OS X Lion 10.7.2 however every time I try to assign those keys to an app's "Record a shortcut" function I get the same error dialog from the OS:
The key combination F15 can't be used!
The key combination "F15" can't be used because it's already used by a system-wide keyboard shortcut. (If you really want to use this key combination, most shortcuts can be changed in the Keyboard & Mouse panel in System Preferences.)
(note: the same happens with F14, F13 and lower as well as F16+ work fine however)
I have looked into my system settings as the dialog suggests however there isn't a single shortcut that uses F14 or F15 anywhere in any of the shortcut groups.
If any of you have an idea of how I could "clear" or even just find out what these keys are currently being used for/by that would be super… they don't seem to do or trigger anything when I press them.
Here is another screenshot of the issue:
Note: This is not app specific, I've tried this in various apps and every time I get the same Mac OS popup.
Thanks for reading,
I look forward to your ideas and insights!

Hi,
Use the step reference to get a PropertyObject reference using the Step.AsPropertyObject. With this PropertyObject reference you can then get the values of Limits.High and Limits.Low using the PropertyObject.GetValNumber() method.
Limits.High and Limits.Low will be the lookup string for the PropertyObject.GetValNumber() method.
Hope this helps
Regards
Ray Farmer
Regards
Ray Farmer

I have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

i have an iphone and an ipad (which are connected by the same apple id) i broke the phone and sold it but i didnt get to factory reset it because it was broken, is there any way for me to wipe my iphone from my ipad?

Try this:
Open the "Find my iPhone" app on your iPad, fill in your AppleID and password at the start up screen, and you should see a list of all your devices and their current location, if connected to a Wi-Fi or mobile data network. Devices not connected will be shown as "offline". But you can still trap on the icon and hit "erase iPhone" in the right hand window.
If your iPhone is not listed, you did not activate this feature during the setup of the phone and it can't be erased remotely.
If the phone is listed, even as offline, tap on "erase" to send the erase command. The next time your device will be connected to any kind of network, the content will be erased.

How can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc?

how can I acess my ipad content from the pc, without enter the security code on ipad? I broke the screen and it doesn´t work. theres a way to enter the code on the pc? thank you

No. Get it fix by making an appointment with the Apple genius bar.

HT2638 since updating iPhoto it has ceased to open. i have tried to Hold down the Command and Option keys on the keyboard but it does not work. iPhoto still does not open

Since updating iPhoto it has ceased to open. I have tried to Hold down the Command and Option keys on the keyboard which is the suggested solution to then open a suggested solution to rebuild the library, but it does not work. iPhoto still does not open. can someone please help?
thank you

Try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
Home/Library/ Preferences folder.
2 - delete iPhoto's cache folder(s):
Home/Library/Containers/com.apple.iPhoto
and, if there is one, the
Home/Library/Caches/com.apple.iPhoto folder
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Happy Holidays

The L and O keys on my keyboard stopped responding. Now locked out

After the L and O keys ceased responding I decided to restart my computer.
The computer is password protected and one of the elements to my password contains one of those letters.
So I am currently locked out of my computer as the key to enter the password is not responding.
Any help to at least get back in
And any further help in the keys?
I'm many miles away from any store
Thank You

single user mode
1) command + S
2) fsck -fy
3) mount uw /
4) passwd username [username=your username]
You will be prompted for new PW. enter it twice.
Only problem is "mount" has an O in it...
Attach USB keyboard? Bluetooth keyboard?

Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook?

Where are the plus and minus keys on a Pavilion dv6-3150us Entertainment Notebook? Joe
Joe B.

Its on the keyboard somewhere on top center close to the number keys. To be straight, its just below F12 key.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

My up and down arrows as well as page up and page down no longer work properly only when using firefox. Page up and down function more like the "home" and "end" keys as do the arrow keys.

Honestly I'm not sure if these began just after I updated FF to the current release, but it's been happening for at least 2 weeks. The arrow keys and page up and page down keys all work as if I'm pressing the 'home' and 'end' keys on my keyboard. This is only when using FF. Please contact me if you need more clarification. Thanks in advance!

Sounds that you have switched on caret browsing.
* http://kb.mozillazine.org/accessibility.browsewithcaret
You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
* Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"
* http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
* http://kb.mozillazine.org/Accessibility_features_of_Firefox

How to get the private and public key?

there is my code,i want to get the public key and the private key �Cbut i could not find the the approprite method to solve the problem.
import java.security.Key;
import javax.crypto.Cipher;
import java.security.KeyPairGenerator;
import java.security.KeyPair;
import java.security.Security;
public class PublicExample {
public static void main(String[] args) throws Exception {
if (args.length != 1) {
System.err.println("Usage:java PublicExample <text>");
System.exit(1);
byte[] plainText = args[0].getBytes("UTF8");
System.out.println("\nStart generating RSA key");
KeyPairGenerator keyGen = KeyPairGenerator.getInstance("RSA");
keyGen.initialize(512);
KeyPair key = keyGen.generateKeyPair();
System.out.println("Finish generating RSA key");
Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding", "BC");
//System.out.println("\n" + cipher.getProvider().getInfo());
System.out.println("\nStart encryption");
cipher.init(Cipher.ENCRYPT_MODE, key.getPublic());
byte[] cipherText = cipher.doFinal(plainText);
System.out.println("Finish encryption:");
System.out.println(new String(cipherText, "UTF8"));
System.out.println("\nStart decryption");
cipher.init(Cipher.DECRYPT_MODE, key.getPrivate());
/*i want to get the private and public key in this method ,but i found the result was not
the one i expected to get,how to solve the problem?
thanks in advance!
System.out.println("private key:" + key.getPrivate().toString());
System.out.println("public key:" + key.getPublic().toString());
byte[] newPlainText = cipher.doFinal(cipherText);
System.out.println("Finish decryption:");
System.out.println(new String(newPlainText, "UTF8"));
thanks in advance!

System.out.println("private key:" +
" + key.getPrivate().toString());
System.out.println("public key:" +
+ key.getPublic().toString());
key.getPrivate() returns an instance of PrivateKey and key.getPublic() returns an instance of PublicKey. Since PublicKey and PrivateKey are interfaces then they will return one of the concrete implementations. Check out the Javadoc for PublicKey and PrivateKey.
When you know which concreate implemenation you have then you can use the methods on that object (by appropriate casting) to find the information you want.

Repairing Library Permissions: But the instructions didn't work clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Went to Help. But the instructions didn't work
clicking the iPhoto icon with the Option and Command keys opened iPhoto but not the First Aid as promised

Give this a try:
1 -be sure to have a current backup of the iPhoto library.
2 - download and launch http://www.macchampion.com/arbysoft/BatChmod.
3 - click on the File button, locate and select your iPhoto Library.
4 - check the Unlock and Apply to enclosed checkboxes.
5 - make no changes to the other checkboxes
6 - click on the Apply button.
OT

How to get the private and public keys to use recaptcha?

I have registered with google to get a recaptcha for my website. All I got was the site key and secret key! Though I need to get the public and private key for muse!

Hello,
Please use site Key as "Public Key"and Secret key as "Private Key".
Regards
Vivek

How usnig manuplate the Import and export Key word.

How usnig manuplate the Import and export Key word? and
how do the clear of those variable?

HI ,
For IMPORT Keyword :---
To retrieve data from the global memory area, use the IMPORT statement. The most basic form of the IMPORT statement is:
IMPORT <variable> FROM MEMORY.
To give the variable a different name in your program from what it is called in the global memory area, use the TO clause. You must define the local variable name with a DATA statement in your program. The format is:
IMPORT <global var> TO <program var> FROM MEMORY.
As with the EXPORT statement, you can specify multiple variables per statement, and you have the option of specifying which cluster ID you wish to import from.
After each IMPORT statement, SY-SUBRC is set to indicate whether or not the cluster ID you specified exists (but not whether specific variables were imported specifically). SY-SUBRC is zero if the cluster exists.
It is also possible to IMPORT and EXPORT to database tables .
ABAP memory that is used to store exported data is user and transaction specific, so when passing data between programs in this manner you must make sure that transaction boundaries are not crossed. Otherwise the contents of this memory will get destroyed and will not be available to the importing program.
For Export Keyword :---
The EXPORT statement moves data from your program into a global memory area. The most basic form of the EXPORT statement is:
EXPORT <variable> TO MEMORY.
This places the specified variable into a global memory area that another program can later read using the IMPORT statement.
You may specify multiple fields in the same EXPORT statement. For example:
EXPORT KNA1-KUNNR KNA1-BUKRS TO MEMORY.
You can give variables a different name in the global memory area using the FROM clause. For example, the following code exports SY-SUBRC and gives it the name RETVAL in the global memory area:
EXPORT RETVAL FROM SY-SUBRC TO MEMORY.
You can specify a cluster ID when exporting data to memory. You can freely choose the name of the cluster ID, which can be up to 32 characters long. Each cluster ID specifies a particular area in memory. Each time you EXPORT data to the same cluster ID, all data previously written to that ID is erased. For example:
EXPORT SY-SUBRC TO MEMORY ID u2018LJS1u2019.
Hope u understand
Thanks
Shambhu

HT4710 when i try to go into iphoto i get a message To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select "Examine and repair iPhoto Library file permissions."

in iphoto i get the shreen with just thr download circle and nothing happens. i click on on edit and get "
To examine and repair permissions, quit iPhoto. Press the Command and Option keys while you open iPhoto, and select “Examine and repair iPhoto Library file permissions.“
it still does not work

Have you tried doing what it says?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

I broke the M and W key cap on my MacBook Pro

Similar Messages

Maybe you are looking for