I build databases with appleworks over 10 years on my ibook, and continue to add to them. Now I have a macbook pro. How can I translate the databases to a compatible program?

Over 10 years I have built several databases with Appleworks. Now I have a macbook pro. How can I translate these databases to a 10.6.8 program?

Thanks Joe, but that won't work. I've finally found a site that answers the question: http://www.wilmut.webspace.virginmedia.com/notes/aw/page1.html
I can only say that by Apple I have been royally screwed. I'll never buy another mac -- everything I do would simply disappear into cyberspace.

Similar Messages

How can I change the database & schema used by an Application?

Hi community,
I am very new on Essbase and I need help to find out how can I change the database connection (and schema) used by the database of an Application. The figure is that I need to point this database to a QA environment (currently it points to DEV).
If I do a right click over the properties of the database, I can see the following tabs: [ General ][ Dimensions ][ Statistics ][ Modifications ][ Compression ]. However, there is no option to change the database connection.
Is there a way to do this?
Thanks in advance for any help! Cheers!

Are you trying to change a database connection of Planning application?
Essbase application do not have a relational connection.
Regards
Celvin
http://www.orahyplabs.com

My laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?

my laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?

See this user tip for recovering the media from the iPhone: https://discussions.apple.com/docs/DOC-3991

Just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

just replaced my iphone 4 with new 4. restore from icloud is hung on an app I no longer use (password probably expired) how can i get the restore to move on to the next app

Read another post in the forum about this and it appears this app also installs a profile with a proxy service that you will have to try and delete as well. Check that out.

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

I have an iPhone and when I got it, I had a Toshiba laptop. Now I have a MacBook Pro, but when I try to wi-fi sync my iphone and new computer, it doesn't work because on my iphone it is still trying to sync with my old computer. How I can fix this?

Move the content from the old computer to the new computer.
Sync the iPhone via cable to the new computer and enable Wi-Fi syncing.
It should now be possible to sync via Wi-Fi to the new computer.

Hello i would like to stop using outlook (office 2011) and use instead "mail": how can i transfer the database?

hello i would like to stop using outlook (office 2011) and use instead "mail": how can i transfer the database?

Hello Sylviefrombuenosaires, here is a link from macworld that can solve your question. Try reading this.
http://www.macworld.com/article/158112/2011/02/export_outlook_ical.html
Carlos

How can i open the database by force?

my database is crash because the machine power problem, when i restart again, oracle error say the control file is older than the system tablespace file,
so i have to create the controlfile again, then , the database need recover , but my database is not archived, it can't take a media recoer , what should i do?
how can i open the database even lost some data?

Pallofa,
Try open img file using some software.
You need a software to mount the img file.
http://techie-buzz.com/how-to/mount-iso-files-as-a-virtual-cd-dvd-drive.html
If thinstead of using an img file, just use this command.
repair-bde e: d: -rp xxxx-xxxxx-xxxxxx-xxxxx -f -lf c:\log.txt
where d is the portable disk whereyou want the data and d drive should at least
equal to e drive.
Where xxxx-xxxx-xxxxx is the 48 digit recovery password.
-lf will generate a log file and point to a certain location, here I have pointed to c drive.
After repair-bde is completed, run chkdsk /f on D drive, then try to access your data.
Manoj Sehgal

How can i check the realtime ability of my program with LV 6.1?

Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
LV 6.1 the single scan vi in my control loop displays no error, if i put too
much stuff in the loop. i check data remaining, everything exactly as in
the example i attached. With Labview 6.0.3 i did use the opcode "read
oldest" all the time and got a "1" at data remaining output if runnig too
slow. How can i check the realtime ability of my Program with LV 6.1? The
attached example is running with 35kHz and green RT-LED, even if i put a
"wait 1 ms" in the loop.
Thx4help.
Joerg
[Attachment Optimized HW Timed Loop.llb, see below]
Attachments:
Optimized_HW_Timed_Loop.llb ‏242 KB

You should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.

How can I know the database is using Cost Based or Rule Based?

Hi all expertise,
How can I know the database is using Cost Based or Rule Based?
If cost based it is using, what methods are need to use to minimize the cost when database is running? And which tables I can see the performance of the database?
Thanks
Amy

how to see database setting ?
use this
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 1
optimizer_features_enable string 9.2.0
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_max_permutations integer 2000
optimizer_mode string CHOOSE
choose means if table statistics is available then it will use cost
else
use rule based optimizer
for seeing performnace of table use
set autotrace on
and run your query
if it doen't show cost.it means it use rule based
for using cost based
u will calculate table statistics
9i
dbms_stats.gather_table_stats('owner','table');
8i
analyze table <table_name> compute statistics;
hope it will help you
kuljeet pal singh

HT1725 Everytime I plug my phone into to sync, Itunes starts downloading the same rented movie over and over. I go in and delte it from my library but it does it again. How can I stop this from happening?

Everytime I plug my phone into to sync, Itunes starts downloading the same rented movie over and over. I go in and delte it from my library but it does it again. How can I stop this from happening?

The sort fields should generally be empty unless you've putting in custom values to sort solo artists by their surnames. You can apply common changes to thousands of tracks at once, just don't apply the wrong change because there is no undo.
It is a good idea to backup before undertaking large scale changes. See this backup tip for a suggested approach.
tt2
Message was edited by: turingtest2

URGENT HELP How Can I clone the database only?

Hi all
I have two database, oracle9.2.0.6 running on RHEL4
one is testing server and the other for the production server
how can i clone the testing DATABSE on the productioin DATABASE?
please help me urgent
Thank You
Regards

Hello Tawfik,
You can use RMAN duplicate with the following link for 9i.
http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php
If you want to clone manually then follow this thread
Cloning 9i database manually

I recently got a hand-me-down Macbook (white) 2010 and want to restore to factory settings. The computer did not come with any discs. It is running 10.6.8 and I purchased 10.6.3 recently to upgrade my MacBook Pro. Can I use that to restore the MacBook?

I want to give the hand-me-down to my kids so they will stay off my MacBook Pro I'd like to start fresh with the MacBook, remove all the former owners information, restore it to factory settings, but it did not come with any installation discs, so I don't know what to do. I recently purchased Snow Lepoard for my 2008 MacBook Pro. Can I use that to restore the MacBook? Also, the former owner purchased Microsoft Office (ugh) with the computer but again, no installation discs. How do I keep that when I restore?
Any help would be appreciated.
Thanks!

I purchased a mini to HDMI cable and tried to connect to the TV but the TV is not recognizing the computer. I attempted to set sound and display settings under the "my Preferences" utility with no success. Again, I'm not sure if I need to upgrade my OS software Any Suggestions?

How can i find the database session of Configurator request ?

Hello at all.
When a user click on configure button of configurator from application i want trace his session on database.
How can i identify the Sid ?
Many thanks.

Search for reg.properties file on server, i think it will give you name of database..
Or
Run configuration again and cancel it once you reach to data details (Not recommended).
Cheers!
Sh!va

How can I edit the database in Lookout OPC Modbus driver OPC sever with the address that has a write attribute?

When I use Lookout Modbus driver OPC to communicate with my instrumnets, I edited the database number such as 41202 that has a Write attribute in my instrumnet manual, the OPC explorer got bad data, and the OPC server gave the illegal address alarm, when I input the address such as 41203 that has R/W attribute, it worked very well. Is there a way to fix this problem. When I used other OPC server, there was no this kind of problem. Thanks!

Thanks for your suggestion. I checked the Modbus manual of my instrument, the register is 16 bit. I tried to edit the data according to the Modbus data member in lookout modbus drivere server for several different member, but the OPC still gave me the illegal address. I think the problem may be produced by their attribute, for the address 1201 and 1202, they have the write attribute, for other addresses, they have W/R attribute, and they can be read or write through Lookout OPC server perfectly. when I used the demo OPC server from other company, it can work well, but it is not convinient for me to use Labview when I use that software. I prefer NI Lookout OPc server. I am using the Lookout 4.5. I am wondering whether the Lookout has some shortcoming when I
use the Modbus driver. Please give me any suggestion, is there any newest version of Lookout OPC sever? Thanks!

How can I use the database default time rather than Java supplied time

I've searched over and over and nobody seems to have this issue so maybe its just me!
When inserting a record I would like the a create_date column to automatically use the database time rather than a supplied time via JPA. That was all times a relative to the database which makes sense.
The trouble is I cant figure out how to do this in a sensible manor.
If I specify an column like :
     @Temporal(TemporalType.TIMESTAMP)
     @Column(name = "CREATE_DATE")
     private Date createDate;
and IDL
CREATE_DATE TIMESTAMP WITH TIME ZONE DEFAULT CURRENT_DATE NOT NULL
If I leave createDate null I get an exception. If modify the column to allow Nullable then column is set as Null.
If I leave the column out of the entity bean and then and create a row then the database current time is inserted. The trouble then is that if I want to read the date I'm going to have to create a copy of the bean but with the CREATE_DATE in it, and this doesn't make sense.

I should also mention that TopLink has always supported the ability to retrieve the current time from the database for use in optimistic locking. The TimestampLockingPolicy offers the ability to configure the next value being retrieved from the database instead of using the local time from the JVM. Our extended optimistic locking configuration does not currently support setting this option but it could be done using a descriptor customizer which can be configured in your persistence unit properties.
Using optimistic locking may be a good solution for the last modified date since it will also ensure that you do not corrupt the database if someone else has incremented this value since your last read.
Doug

I build databases with appleworks over 10 years on my ibook, and continue to add to them. Now I have a macbook pro. How can I translate the databases to a compatible program?

Similar Messages

Maybe you are looking for