I Cal question

I am trying to subscribe to our son's school calendar program (url) with ical. It is prompting me to enter a logon name and password ..having tried my apple id, computer logon and password, nothing seems to work. Does I cal have its own login that I need to set up?

iCal has no log-in requirement. I'm fairly sure it is the school's calendar web page that requires a password. Quite common

Similar Messages

SQL 2012 user CAL Questions

I tried to setup a SQL 2012 server with 5 SQL client PC. Those 5 PC use same application to connect to SQL server with same network user account. It's a 24/7 manufacture enviroment each PC use by 3 operators with 3 shifts. How many user CAL I need
to buy?
(5 PC with same SQL account) 5 user CAL?
(5 PC x 3 user) 15 user CAL?
(5 PC x 3 user x 3 shift) 45 user CAL?

Each CAL is assigned to a specific user _or_ a specific device. If assigned to a user, it covers that user on any device. If assigned to a device it covers that device when used by any user.
So either assign one CAL to each person who works as an operator (looks like 9 or more), or each of the 5 PCs. When you assign the CALs to the devices you don't have to use the same SQL account on all 5. Each user can have a unique login, but
they would only be able to user the application or connect to SQL server from one of the 5 PCs.
Note that assigning CALs to users also covers those users for connecting to other SQL Servers.
David
David http://blogs.msdn.com/b/dbrowne/

Licensing question for AD enterprise with new SQL Server

Hi!
We have Server 2008 R2 STD where our AD is located and it has enough User CAL's. Additionally we have Terminal server with TS licenses.
Now we're purchasing a Server 2012 where we plan to install SQL Server 2012 STD where we will install our third party program and this program is going to be used through Terminal server.
Now the question is do I only need SQL CAL's or will I have to get both SQL CAL's AND User CAL's for the new server? I'm thinking AD servers User CAL's is enough for the whole enterprise, but I'm not 100% sure and need help with this!
Thanks!

Licensing questions should be directed to trained Microsoft licensing specialists instead of a technical forum.
www.microsoft.com/licensing.
That said, SQL CALs and operating system CALs are sold separately. Talk with the vendor from whom you are purchasing your licenses. They should be able to help you sort out the CAL questions.
. : | : . : | : . tim

This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

This is probably a stupid question, but what does the red circle with a number in it mean on iCal? It looks just like the emails notification. I do not have anything do or up in my cal.

Actually, another person on the "more like this" had the right answer. It meant I had a notification for an invite that I needed to respond to.
Hope this helps you as much as it helped me.
D

A question about SharePoint 2013 CAL

Hi all,
I have a question about SharePoint 2013 licensing. We are at the moment using SPS 2010, for 2015 we are going to use SharePoint 2013. We licensed SharePoint 2010 with enterprise CALs and we feel that most of its features are not being used by us. The only
thing that we use is publishing InfoPath forms to form libraries within SharePoint, do we need to have Full enterprise license to use this feature? Or would the standard CAL suffice to do this function. Any advice would be appreciated.
Thanks

InfoPath Forms services is an Enterprise license feature. Anyone using InfoPath forms will need an Enterprise cal in 2013.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

DreamSpark Standard/Premium CAL licensing question

Hi to all,
Sorry in advance for not technical question, but I was redirected here from DreamSpark Support which wasn't able to answer my question. Since there is no forum which suits my problem best, I decided to post here.
I'm administrator of IT Academy within which we are allowed to use DreamSpark Standard and/or Premium subscription. My question is - do I need any additional CALs for Windows Server ,Windows 7, SQL Server or any other software used for only LAB purposes?
For example if I installed Windows 7 on PCs in LAB and sql server on central server for students to learn T-SQL - do I need any CALs or are they included in DreamSpark Premium/Standard subscrption. If yes, should I download/install these CALs in any special
way or can I just use all the software without considering any CAL issues?
Thank you for any reply,
Regards,
Pawel Damian

Pawel, do you still need to know this?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!
Ed,
Because of such question I have raised below thread if you could please have a look.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b8fa57c6-251b-4b47-b1f8-b47a451aa09d/sql-server-licensing-expert-on-forum-from-ms?forum=suggest
Pawel,
Unfortunately this is technical forum and its difficult to find MS licensing expert here who only can correctly answer your question. Did you talked to MS licensing expert of your region.
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Cal script question to calculate exchange rate

Hi All expert,
I'm new in Essbase, can anyone help and tell me what's wrong with the following cal script?
I got 10 dimension
- Account
- Month
- Year
- Market
- Product
- Cost center
- Currency
- Version
- Currency type - USDvalue, EURvalue, etc.
For data upload, we'll upload only either USD or EUR value, then based on exchange rate for the month (also loaded as data), try to calculate the value in other currency
/* GET EXCHANGE RATE */
     FIX(@LEVMBRS("3000000000",0),@LEVMBRS("Company",0), @LEVMBRS(Market,0),
          @LEVMBRS(Product,0),@LEVMBRS("Cost Centre",0),@LEVMBRS(Month,0),
          @LEVMBRS(Year,0),@LEVMBRS("Version",0),@LEVMBRS(Currency,0))
          "USDValue" (
          IF (@ISMBR("USD"))
               USDValue;
          ELSE
          EURValue / (@CURRMBR("Year"))->(@CURRMBR("Month"))->(@CURRMBR("Version"))
          ->(@CURRMBR("Currency"))->"CTR_ACC"->"MKT_HK"->"PROD_TRY"->"999999"->"COM_1010"->
          "RPT to EUR ex rate";
          ENDIF;
ENDFIX;
CALC All;
I got stuck after running this script, thanks for all your help in advace.

/* GET EXCHANGE RATE */
     FIX(@LEVMBRS("3000000000",0),@LEVMBRS("Company",0), @LEVMBRS(Market,0),
          @LEVMBRS(Product,0),@LEVMBRS("Cost Centre",0),@LEVMBRS(Month,0),
          @LEVMBRS(Year,0),@LEVMBRS("Version",0),@LEVMBRS(Currency,0))
          "USDValue" (
          IF (@ISMBR("USD"))
               USDValue;
          ELSE
          EURValue / (@CURRMBR("Year"))->(@CURRMBR("Month"))->(@CURRMBR("Version"))
          ->(@CURRMBR("Currency"))->"CTR_ACC"->"MKT_HK"->"PROD_TRY"->"999999"->"COM_1010"->
          "RPT to EUR ex rate";
          ENDIF;
ENDFIX;
CALC All;
I got stuck after running this script, thanks for all your help in advace.I'm not sure what you mean by you got stuck after running the script, can you eloborate? I will point out that there are some things in your script that are a bit odd.
(@CURRMBR("Year"))->(@CURRMBR("Month"))->(@CURRMBR("Version"))->(@CURRMBR("Currency"))
is unnecessary as the fix statement above it will set that all for you.
I think I would rewrite this as
     FIX(@LEVMBRS("3000000000",0),@LEVMBRS("Company",0), @LEVMBRS(Market,0),
          @LEVMBRS(Product,0),@LEVMBRS("Cost Centre",0),@LEVMBRS(Month,0),
          @LEVMBRS(Year,0),@LEVMBRS("Version",0),@LEVMBRS(Currency,0))
          "USDValue" (
          IF ( @ISMBR("USD"))
          "USDValue" = EURValue / "CTR_ACC"->"MKT_HK"->"PROD_TRY"->"999999"->"COM_1010"->"RPT to EUR ex rate";
Else
          "EURValue" = USDValue * "CTR_ACC"->"MKT_HK"->"PROD_TRY"->"999999"->"COM_1010"->"RPT to EUR ex rate";
          ENDIF;
ENDFIX;

Cisco and CALEA compliance question.

Greetings! I was wondering about how Cisco hardware supports/will support CALEA compliance? For those of you that don't know, CALEA stands for Communications Assistance for Law Enforcement Act, and means that service providers are mandated to be able to accommodate law enforcement agencies in the serving of warrants to tap data lines, observing all forms of data traffic (VoIP, Instant Messaging, Surfing, etc.) for use as evidence. Any information on this topic in relation to Cisco hardware would be greatly appreciated. Thanks!!

Bryan, the MARS does not support SCAP and there are no plans to do so. Matthew

I cal subscribe question

Do I need icloud to subscribe to someone elses ICAl? Also do I need to update to Lion to subscribe to someone's I Cal?
Thank you!

iCal has no log-in requirement. I'm fairly sure it is the school's calendar web page that requires a password. Quite common

Cal Month question

Hi
My requirement is to Have Months in the Rows. Jan --- Dec as the fixed format.and i'll put varialble for the Year..Based on the year variable it shoud display the months..
Year :2010
month--P1-p2--tot
Jan--1--1---2
Feb--2-3----5
Mar--1-1---1
Apr--41----5
May----
Jun----
jul----
aug
sep
oct
nov
dec
My question in selection and whle createing variable where will i capture the values of Jan,feb etc.
Please advise on this..
Any updates on this
Regards
Edited by: Bi power on Apr 15, 2010 6:17 AM
Edited by: Bi power on Apr 15, 2010 8:27 AM

Hi ,
I can not provide you the code, but I can give you steps.
1. Create one Variable on 0CALYEAR, set its processing type to User Entry. Set its property for ready to input. So whenever you will run a query which uses this variable ,a screen willl appear where you can enter the year for which you want results.
2. Create variable on 0CALMONTH with type Customer Exit. go to CMOD and write a code for this. Which will have the following logic.
-> i_Step = 2 // Post Processing.
-> Read the value of the variable which you have created on 0CALYEAR.
-> Get the first month of the year and set it as a lower range of the variable which you have created on 0CALMONTH.
-> Get the last month of the year and set it as a higher range. Thus you will get the all the months of the year which you have entered in the selection screen.
-> use this variable in the query as per the output required.
Hope this will help.
-Jaimin

PXI 2527 & PXI 4071 -Questions about EMF considerations for high accuracy measurements and EMF calibration schemes?

Hi!
I need to perform an in-depth analysis of the overall system accuracy for a proposed system. I'm well underway using the extensive documentation in the start-menu National Instruments\NI-DMM\ and ..\NI-Switch\ Documenation folders...
While typing the question, I think I partially answered myself while cross-referencing NI documents... However a couple of questions remain:
If I connect a DMM to a 2 by X arranged switch/mux, each DMM probe will see twice the listed internal "Differential thermal EMF" at a typical value of 2.5uV and a max value of less than 12uV (per relay). So the total effect on the DMM uncertainty caused by the switch EMF would be 2*2.5uV = 5uV? Or should these be added as RSS: = sqrt(2.5^2+2.5^2) since you can not know if the two relays have the same emf?
Is there anything that can be done to characterize or account for this EMF (software cal, etc?)?
For example, assuming the following:
* Instruments and standards are powered on for several hours to allow thermal stability inside of the rack and enclosures
* temperature in room outside of rack is constant
Is there a reliable way of measureing/zeroing the effect of system emf? Could this be done by applying a high quality, low emf short at the point where the DUT would normally be located, followed by a series of long-aperture voltage average measurements at the lowest DMM range, where the end result (say (+)8.9....uV) could be taken as a system calibration constant accurate to the spec's of the DMM?
What would the accuracy of the 4071 DMM be, can I calculate it as follows, using 8.9uV +-700.16nV using 90 days and 8.9uV +- 700.16nV + 150nV due to "Additional noise error" assuming integration time of 1 (aperture) for ease of reading the chart, and a multiplier of 15 for the 100mV range. (Is this equivalent to averaging a reading of 1 aperture 100 times?)
So, given the above assumptions, would it be correct to say that I could characterize the system EMF to within 8.5uV+- [700.16nV (DMM cal data) + 0.025ppm*15 (RMS noise, assuming aperture time of 100*100ms = 10s)] = +-[700.16nV+37.5nV] = +- 737.66nV? Or should the ppm accuracy uncertainties be RSS as such: 8.5uV +- sqrt[700.16nV^2 + 37.5nV^2] = 8.5uV +-701.16nV??
As evident by my above line of thought, I am not at all sure how to properly sum the uncertainties (I think you always do RSS for uncertainties from different sources?) and more importantly, how to read and use the graph/table in the NI 4071 Specifications.pdf on page 3. What exactly does it entail to have an integration time larger than 1? Should I adjust the aperture time or would it be more accurate to just leave aperture at default (100ms for current range) and just average multiple readings, say average 10 to get a 10x aperture equivalent?
The below text includes what was going to be the post until I think I answered myself. I left it in as it is relevant to the problem above and includes what I hope to be correct statements. If you are tired of reading now, just stop, if you are bored, feel free to comment on the below section as well.
The problem I have is one of fully understanding part of this documenation. In particular, since a relay consists of (at least) 2 dissimilar metal junctions (as mentioned in the NI Switch help\Fundamentals\General Switching Considerations\Thermal EMF and Offset Voltage section) and because of the thermo-couple effect (Seebeck voltage), it seems that there would be an offset voltage generated inside each of the relays at the point of the junction. It refeers the "Thermocouple Measurements" section (in the same help document) for further details, but this is where my confusion starts to creep up.
In equation (1) it gives the expression for determining E_EMF which for my application is what I care about, I think (see below for details on my application).
What confuses me is this: If my goal is to, as accurately as possible, determine the overall uncertainty in a system consisting of a DMM and a Switch module, do I use the "Differential thermal EMF" as found in the switch data-sheet, or do I need to try and estimate temperatures in the switch and use the equation?
*MY answer to my own question:
By carefully re-reading the example in the thermocouple section of the switch, I realized that they calculate 2 EMF's, one for the internal switch, calculated as 2.5uV (given in the spec sheet of the switch as the typical value) and one for the actual thermocouple. I say actual, because I think my initial confusion stems from the fact that the documenation talks about the relay/switch junctions as thermocouples in one section, and then talks about an external "probe" thermocouple in the next and I got them confused.
As such, if I can ensure low temperatures inside the switch at the location of the junctions (by adequate ventilation and powering down latching relays), I should be able to use 2.5uV as my EMF from the switch module, or to be conservative, <12uV max (from data sheet of 2527 again).
I guess now I have a hard time believeing the 2.5uV typical value listed.. They say the junctions in the relays are typically an iron-nickel alloy against a copper-alloy. Well, those combinations are not explicitly listed in the documenation table for Seebeck coefficients, but even a very small value, like 0.3uV/C adds up to 7.5uV at 25degC. I'm thinking maybe the table values in the NI documentation reffers to the Seebeck values at 25C?
Project Engineer
LabVIEW 2009
Run LabVIEW on WinXP and Vista system.
Used LabVIEW since May 2005
Certifications: CLD and CPI certified
Currently employed.

Seebeck EMV needs temperature gradients , in your relays you hopefully have low temperature gradients ... however in a switching contact you can have all kind diffusions and 'funny' effects, keeping them on same temperature is the best you can do.
Since you work with a multiplexer and with TCs, you need a good Cold junction ( for serious calibrations at 0°C ) and there is the good place for your short cut to measure the zero EMV. Another good test is loop the 'hot junction' back to the cold junction and observe the residual EMV. Touching (or heating/cooling) the TC loop gives another number for the uncertainty calculation: the inhomogeneous material of the TC itself..
A good source for TC knowledge:
Manual on the use of thermocouples in temperature measurement,
ASTM PCN: 28-012093-40,
ISBN 0-8031-1466-4
(Page1): 'Regardless
of how many facts are presented herein and regardless of the percentage
retained,
all will be for naught unless one simple important fact is
kept firmly in mind.
The thermocouple reports only what it "feels."
This may or may not the temperature of interest'
Message Edited by Henrik Volkers on 04-27-2009 09:36 AM
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

License Question for SharePoint Foundation 2010

I have a question as it regards to the user agreement for SharePoint Foundation 2010.
When I deploy code to the front-end of the Foundation service which directly modifies the code on the front-end to make the system do anything different out of the box, does this mean I have violated the code agreement.
For instance, using JQuery to manipulate the look and feel of a form, use third party tools like SPServices, attach SharePoint Designer workflows, modify the server end by using STSADM command line to turn features on and off, create and deploy site
collection features using Visual Studio, or create web parts?
Also, if I am using this software for business purposes of any kind, does it mean I need to purchase the software?
I have received a copy of Share Foundation along with a Server 2008 R2 OS which was purchased.
IF I use Foundation to run my business processes, am I in violation of the user agreement and do I need to purchase SharePoint Server 2010 with CALs?

The official answer: "I'm not a licensing person. Please contact Microsoft."
In general:
Foundation is a "free" download, but can only be installed on Windows Server. You can install Foundation 2010 on Windows 7, but only for testing/development, not as a production server.
Foundation is "free" in that it is licensed as part of the Windows Server it is installed on.
If you have 500 users, then Windows Server will need to be licensed for 500 users. The Windows Server licensing will also depend on if the users are internal or on the internet.
SQL Server: If you are using SQL Express, then no license costs, but the number of SharePoint users may impact the licensing costs of your SQL Server.
The choice between Foundation vs. Standard or Enterprise is the list of features needed and scalability (how many users?).
"JQuery, SPServices, SharePoint Designer workflows, STSADM, Visual Studio..."
None of those will impact your licensing. Anything that you do to directly query or manipulate the SQL tables will impact your support. SharePoint is a platform and you are expected to configure and customize it.
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Recommendation for home wireless service in So Cal?

I need to purchase wireless internet service for new home in Southern California. I currently use ATT DSL. After briefly switching to ATT Uverse on advice of ATT customer service when I wanted to upgrade to faster service and old airport apparently stopped working correctly, it was a disaster. (There is a separate conversation on the Apple Forum about the experience.) After much hassle I switched back to ATT DSL and bought a new airport. Things have worked fine since, although my son still thinks it takes too long to download movies. We are a Big Mac household - iPad, iPad Mini, iPhone 5, two MacBook Airs, iTouch - and an oddball Droid phone. New home currently uses Verizon phone and internet service through Time Warner (I'm choosing to go with Direct TV).
So my questions - Does Verizon wireless internet service work well with a household full of Macs? I prefer to use an Airport. Is there a modem and/or router that Verizon uses that is good or bad? Fios or DSL? (I had a horrible experience with the modem/router with the Uverse disaster.) Has the modem/router/Mac connection improved with Uverse? Or should I just stick with what I know works for me - ATT DSL even though its not the fastest speed?
I'm not technologically sophisticated (this is probably obvious), so would appreciate replies in plain English. Thanks!

DSL is yesterday's technology:
BEST is Verizon FIOS (or ATT Uverse) depending if either has fiberoptic cable to your door (call each to find out; they will know from your address). Be careful, ATT is now calling their non-fiberoptic service Uverse; so ask about fiberoptic!
I use Time-Warner Internet at its fastest consumer speed. I am currently uploading a 16GB file to an associate in UK and it will take 18 hours (remember upload is always much slower than download). I think my service is 20 or 30 down and 1 up; at about $40/month. I have multiple routers to connect it to many Macs, iPhones, AppleTVs, home entertainment systems, etc.
Stay away from satellite; it is ONLY for internet service to the boonies...
FYI: I use DirecTV (and a roof-top antenna) for TV and T-Mobile for both VoIP at home and iPhone 5. Everyone HATES the Time-Warner cable service due to their monopoly in So. Cal.
T-Mobile has best monthly rates in So. Cal for iPhone 5 AND you can purchase additional data for tethering (using your iPhone as a WiFi HotSpot or with BlueTooth, as I use it at an off-line office that has no internet service). AND you can talk and internet at the SAME TIME, unlike Verizon which on the iPhone is one or the other.
Soon T-Mobile will implement their UMA/WiFi Calling feature for the iPhone; already implemented on Blackberry, Android and other phones. This allows FULL T-Mobile talk and text coverage ANYWHERE in the world where you have access to WiFi. I use it with my Blackberry on every trip to London or at my girlfriend's house in the hills above Santa Cruz by swapping the SIMM card, now with micro-SIMM adapter.

SharePoint 2013 CAL and External users

Hi,
We are setting up an extranet site(SharePoint 2013 standard version) on Rackspace, Both employee and non-employee will use this site. Employee will use company existing SAML 2.0 based authentication and non-employee will use FBA to login to
the portal.
I would like to know if we need to buy CAL for external users(non-employee)? What is the definition of external users?
Thanks,
Pat

Check out this post and this should answer all you questions.
http://social.technet.microsoft.com/forums/sharepoint/en-US/0756aaa7-b307-4793-b019-bc58d4ace8b2/sharepoint-foundation-fba-on-internet-licensing
Thanks, Danny Hickman IT Support Specialist

How do we manage multiple users in a CAL account

Hello Gurus,
A colleague of mine has created an instance of HANA in CAL and I'd like to access it because we need to develop together, but we're not sure how to do so. We can see tabs "Accounts" and "Users" in CAL but how do we add someone else's user to your own CAL account?
Ideally, we'd like to both manage the same account (to start/stop the instances) with our own separate users. Should be very easy to do and yet there's no indication on how to do it.
Any help would be greatly appreciated.

Hi Daniel,
Lemme explain that in detail so that, you have a clear picture on this :-)
For Paid Subscriptions:
>> The pricing works per active instance, per month: so you can have only one active instance at a given point in time in your CAL account. This means you should see only one instance under the "Instances" tab in your CAL account (the state of the instance can be active or suspended but as long as you see an instance under the "Instances" tab - it is counted as an active instance).
>> If you want to create another instance (a new solution instance), then first you will have to terminate/destroy the previous instance under the "Instances" tab so that, the Instances tab is empty and then you can go ahead and create a new instance. You can do this multiple times and create multiple instances from the solutions library as long as you follow the above mentioned rules.
For Free Trials:
>> The above restrictions do not apply for free trials and you can create multiple "unique" trial instances in parallel. For example: you can create one trial instance for BW on HANA trial and in parallel you can create another trail instance for ERP on HANA and another instance for CRM on HANA (so you can have 3 different trial instances running in your CAL account at the same time under the "Instances" tab) but you CANNOT create two instances of the same trial (so you cannot have two instances of BW on HANA trial in the same account).
For Users:
>> You can add multiple users from your organization in your CAL account and give them administrator or read only access to the solutions instances in your account.
Btw, thanks for bringing-up this question, I will add this to our FAQ section as this would be helpful for everybody.
Hope this info. helps and lemme know if you have additional questions.
Best Regards,
Adarsh

I Cal question

Similar Messages

Maybe you are looking for