I came up with the brilliant idea to add Photoshop Elements 6 to Adobe CS3
My original purpose was to add the OneOn Software with Elements. Well I found I started having some problems with Photoshop. I was adding Nik filters to both the elements and the CS3. I didn't realize that I had Elements 6 so I downloaded 8 to help the situation. This only made it work. I decided to delete Photoshop CS3 and both elements 6 and 8. I notice that the CS3 and Elements were sharing software. When I tried to reload CS3 but I kept getting requests for Elements 6 and then 8 and back again. I wasn't able to reload the software. I kept getting errors to complete the software before loading other software. I went through the computer and deleted all the Adobe files in Applications and in Utilities. I have repaired the hard drive and the permissions under Disk utility. I still have a problem loading CS3. At this time I am going to start fresh and reload Adobe Snow Leopard. Does anybody have any suggestions to fix the problem without reloaded the software and wiping everything out. Thanks.
Mark
The moral in this story is keep it simple and don't mix Elements and Photoshop CS3.
I did call Adobe tech support and they only support the most current software which is CS5 so they didn't help me at all.
Well, I don’t quite follow the problem … but maybe the cleaner script can help removing CS3 properly before reinstalling?
http://kb2.adobe.com/cps/829/cpsid_82947.html
Similar Messages
-
Why don't changes made in camera raw with the adjustment brush carry into photoshop?
Why don't changes made in camera raw with the adjustment brush carry into photoshop?
Using the Open button in ACR to get to PS doesn’t create a PSD or a TIF, it just transfers the image in memory.
As has been asked, already, what are the precise steps of your workflow starting with your painting the adjustment brush strokes in ACR and seeing the image in PS without the strokes, and what exact versions of PS and ACR are you using?
Use Help / About Photoshop..., and Help / About Plug-ins... / Camera Raw... -
My browser recently updated to firefox 23 and I was so shocked to see the core functions - disable images and javascript missing. I spent a good while going through every single menu and sub-menu because the idea that firefox could make such a laughable and stupid decision to remove it didn't even occur to me. I've been using firefox for YEARS, and in all the 20+ releases I've lived through, this by far wins the cake of WTF. I use these features on daily basis and I seriously have no idea what made firefox developers think that they won't make users flip the tables by removing such useful basic functionality. So if this isn't fixed in next update, I'm giving up firefox. It sucks to have to part with it after so long, but you're giving users no choice. A browser that is so severely handicapped isn't worth wasting my time on. I'll go back to firefox 22 until I see if this is addressed in near future, else I need to go for google chrome.
Honestly, VERY very disappointing update from firefox.Agreed with the first poster. I just had to spend more time than I thought necessary trying to deal with this just to simply do something that was always so simple before in FireFox.
Thanks to that complicated QuickJava plugin suggested as an alternative, I clicked its button to see what would happen... and WHOOPS! There goes Javascript. Clicking it back doesn't re-enable it. Thanks. This is just what I needed when I wanted to ONLY DISABLE IMAGES.
Instead of playing around with its settings I decided to just remove it asap and try another avenue instead of screwing up my settings any more being new to the add-on. Removing the plugin left my browser without Javascript... great. That was a fun experiment. I guess that's my "thank you for trying!".
Congratulations, OP, for making it clear how ridiculous this dumb decision was. I'm going to follow your suggestion and actually say "bye bye" to Firefox. I've been using it since the days when it used to be called Firebird. Yeah, long time ago. And this day marks the end. It seems the policy these days is to appeal to newcomers to computers, instead of the actual computer users who made this program popular in the first place. This seems to be the death kiss for any good piece of software that gets too popular.
</rant> -
FAQ: Where can I download the manual / user guides for Photoshop Elements?
Find the manual / user guides here:
Photoshop Elements 13 Editor:
http://helpx.adobe.com/pdf/photoshop-elements_reference.pdf
Photoshop Elements 13 Organizer:
http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
Elements 12 Organizer:
http://help.adobe.com/archive/en/elements-organizer/12/elements-organizer_reference.pdf
Elements 12 Editor:
http://help.adobe.com/archive/en/photoshop-elements/12/photoshop-elements_reference.pdf
Elements 11 Organizer:
http://helpx.adobe.com/pdf/elements-organizer_reference.pdf
Photoshop Elements 11 Editor:
http://helpx.adobe.com/pdf/photoshop-elements_reference.pdf
Elements 10 Organizer:
http://help.adobe.com/en_US/elementsorganizer/using/elementsorganizer_10_help.pdf
Photoshop Elements 10 Editor:
http://help.adobe.com/en_US/photoshopelements/using/photoshopelements_10_help.pdf
Elements 9 Organizer:
http://help.adobe.com/en_US/elementsorganizer/using/elementsorganizer_9_help.pdf
Photoshop Elements 9 Editor:
http://help.adobe.com/en_US/photoshopelements/using/photoshopelements_9_help.pdf
Elements 8-10 Organizer Help PDF archive:
http://helpx.adobe.com/elements-organizer/archive.html
Photoshop 7-10 Elements Editor Help PDF archive:
http://helpx.adobe.com/photoshop-elements/archive.html
Photoshop Elements 6 resources:
http://www.adobe.com/support/documentation/en/photoshop_elements/
Photoshop Elements Key Concepts glossary:
http://www.adobe.com/designcenter-archive/photoshopelements/articles/concept_index.html
You might want to bookmark the new Help hub for Photoshop Elements: http://helpx.adobe.com/photoshop-elements.html
A one stop destination with help, tutorials, installation, community and more!
Message was edited by: Brett N
Message was edited by: Barbara B.It should be available within the app. Press the F1 key.
-
I have an MacBook Pro 10.6, using disk utility I tried to verify my disk, but it came up with the message, please use your start up disk, I tried this, starting the computer up and pressing C, but it ejected the disk, the same thing happened while I running the computer. Is the hard drive damaged as laptop doesn't seem to recognize the start up disk ? If so, I presume I will have to put in a new one.
There haven't been any problems with the computer, apart from a sticky curser,I have run a permissions programme from disk utility, there were a lot of different ones, but it seem to be able to fix them.
Any comments or ideas ?
Thank you in anticipation.First backup your users files off the machine to a external storage drive (not TimeMachine!)
Most commonly used backup methods
Next to startup from the disk, have it inserted, hold c or option/alt (wired or built in keyboard) and then boot the computer and or select the disk when it appears and click the arrow.
Disk Utility is under the Utilities menu on the second screen.
Step by Step to fix your Mac
If you used the wrong 10.6 disk, it will spit it out or have issues, use the one that came with that machine or if it's defective, call Apple for a new one. -
I was talking outside on my iPhone 5 in a fairly humid environment (The Pilbara in January, 2014) then when the call was finished I hung up (as I was walking back inside to the air-conditioning) this white vertical line appeared in the centre of the screen and wouldn't go away. I couldn't use it NOR could I accept calls. (I called my number from my other phone). I eventually managed to turn it off after removing the protective casing (Otter Box) and then it came up with the white cord / iTunes screen........I left it for a while...it turned back on BUT is still had a flickering screen.......I re-charged it and I have backed it up this morning (at work) on iTunes and it seems to be working 'fine.' All I can say is 'DO NOT GET RID OF YOUR SAMSUNG GALAXY PHONE IF YOU HAVE ONE!' I haven't had an OUNCE of trouble with it and have owned it for at least 3 years. The iPhone has been up and 'running' since the 6th of January, 2014. This happened on the 15th of January, 2014.
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
My XP machine is unable to load iTunes 10.5.1. It gets about halfway loaded then says it can't find Bonjour.msi. However, that file is on the computer. I tried loading the Bonjour.msi from another computer but it came up with the same message. I also tried to remove iTunes from the add/remove sector on Control Panel but it also refused for the same reason. Help, please.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible - this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7
You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.8
Mac download (.dmg file) click here DNG Converter 8.8
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial -
Just the other night my phone desided to reset itself, and when i went to restore it it came up with The iPhone iPhone could not be restored. an unknown error occurred (-1).
Please Help i need this phone....and i dont have the money to replace it!I havent jail broken it so its probable a hardware issue then.......well then.......
anyway thanks man
Cheers! -
How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do? thanks
Hi frenchiem,
This is due to the PDF file cannot display the original fonts. To fix it, creator should create the PDF file with the embed font option enabled. Thus, user can open the file on any platform with the same layout. Or the Acrobat product can display them after you install the appropriate font support package on the client side.
Regards,
Rave -
A camera icon (with the ends cut off) is on my lock screen, and it wont open the camera app. how do i fix this? does anyone else have this problem with the iphone 4s?
What do you mean "with the ends cut off"?
You swipe the screen upwards starting on this icon to open the camera app. -
I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpfulHello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/ -
hey my iphone was working perfectly and then i sent it to check up and it came back with the itunes icon and data cable on it. so i tried plugging it in the computer and a message on itunes came up saying theres a problem with your phone and it may be damaged and cannot be activated. HELP PLEASE!!
Why on earth send a Worning phone for service sounds like cutting up a Heaththy PET to see how it looks on the inside
-
Firefox came up with the unresponsive script message and now if frozen?
Firefox came up with the unresponsive script message. I clicked 'stop script' but now Firefox has frozen and is not responding to anything I do. I cannot click on anything. It will not let me close it down, uninstall it or shut down my computer.
Upgraded to FF 33 and installed English dictionary. Now FF is hanging frequently in www.morningstar.com and I believe elsewhere with the following:
Warning: Unresponsive Script
Script: chrome://browser/content/browser.js.17006
I do NOT understand the "chrome" reference.
This is quite annoying. I upgraded to FF 33 in order to try to get back spell checking in Morningstar posts which I lost back at FF 24, as I recall, but it did NOT solve the problem. Now I have this mess. -
Hello friends,
i m trying to create my own CFL with the new idea
1. i created default form with 3 column using UDO
2. at the item event i m sucessful in opening the Default UDO form
but now i want to make rows to be select for the default UDO form matrix
so suggest me as soon as possible
Take care
ByeHi shirdhar
u r right after registring the UDO the system default form is opened which i want to access
the data present in grid/matrix how to do
the system is telling that only 2 columns were present and not showing the title of the caption
plz help me
Regards
Rajesh
Maybe you are looking for
-
Hi, What is the use of the SID in the update (or new) table of DSO? Anyway the values of the data and key fields are stored in this table. How does the SID entry help here? Regards,
-
Opening mail application from the dock sometimes doesn't open window.
In Mountain Lion, sometimes when I open Mail on the dock with a single left mouse (or touchpad) click, the Mail application opens, as shown in the menu bar, but a mail window doesn't open. I must then click or double click on it to get it to open a w
-
I have a photo cd from photographer that was burned on a mac but it will not open on my mac. It goes in, makes some noise, then ejects. My system pref. is set to open iPhoto when a photo cd is inserted. She has sent me 2 disc and both do the same
-
Oracle Text Indexing performance in Unicode database
Forum folks, I'm looking for overall performance thoughts in Text Indexing within a Unicode database. Part of our internal testing suites includes searching on values using contains filters over indexed binary and text documents. We've architected th
-
Access to Internet Routing Entries
Hi! I know that list of structures ire_t contains routing information of host. But where is the head of this list? What is it's name? Maybe somebody knows. My idea is to get IRE list's head and find entry that contains default gateway. One thing else