I can boot into Arch, but not DM or DE [solved]
I just recently installed Arch in VirtualBox. Arch is running on 1GB of RAM (changed from 512MB) and 8GB of storage with dynamic size enabled. I set the specs low as I want this to be portable and load on almost any machine. When it boots up I can access command line, but not DM or DE. If I set it to automatically boot into a DM or DE, it hangs (black screen). I have tried different DMs (GDM, KDM, SDDM) and DEs (Gnome, KDE, Plasma), but I get the same problem. During the boot process I get intel_rapl: no valid rapl domains in package 0 and SMBus base address uninitialized. While researching though, these problems don't appear to be linked to mine. Any advice would be helpful, thanks.
Last edited by flavinator (2015-06-12 04:46:33)
flavinator wrote:Update: So, I'm a little lost. I got all the packages installed. I edited the xinit file the way it says to. I chmod it.
Why did you chmod it? This is not in the instructions.
flavinator wrote:When I startx though, X has no file or directory, and don't see where it says how to create one.
What does this mean? Is this some translation or interpretation of an error message? Post the *actual* output.
flavinator wrote:I thought it would do that when XDM installed.
XDM is also not part of the instructions for testing TWM. If you start doing random other steps, we will not be able to help you as we will not understand what state your machine is in.
flavinator wrote:Update 2: I got startx to run, but then it fails with "Using system config directory "/usr/share/X11/xorg.conf.d" 0x00c00000, type = 1) Invalid argument (22) (II) Server terminated successfully"
Please post the *full* output. The server terminated successfully suggests a problem with your xinitrc, so as ewaller requested, we'll need to see that - after you provided the actual output and error messages you are getting.
Similar Messages
-
MAX shows PXI card when booted into Windows but not in Hypervisor mode
Hello again all you helpful forum-goers!
I'm having some difficulties with a Hypervisor system seeing the two Pickering 6 channel programmable resistor cards that are loaded into the PXI chassis. When I boot into Windows mode, MAX sees them under the My System just fine. When I then run the Hypervisor configuration software, I see them both listed, and have them assigned to the Real-Time OS. However, when I then boot into Hypervisor mode, MAX does not see them under the Remote Systems -> Hypervisor Target -> Chassis (or anywhere else), and the drivers report not seeing any modules either when I debug my code running on the real-time system.
Does anyone have any idea what setting or configuration I might have incorrect? Is there any other information I can provide that would be relevant or useful to answer this question? I'm not the main hardware guy, he just got married and so isn't available, so I'm out of my comfort zone. ;-) I write the software that runs on the system, though, so I'm not completely clueless. I know we just replaced the controller in the main chassis with a faster one (unfortunately I don't have the number on hand, the simulator is down in the lab), but I also know we are using that same controller and Pickering card on a different simulator and it is working just fine.
Any ideas? I very much appreciate your time!
-Joe
Solved!
Go to Solution.Nevermind, the answer turned out to be that I did not have the drivers fully installed on the real-time system. Apparently that caused it to not recognize the cards. I never did figure out / remember exactly how to install the Pickering drivers on the real-time side, but fortunately I was able to just copy all the files that had "Pickering" in their name from the C:\ni-rt\system folder of the real-time file directory from another simulator to this one. ;-)
Cheers! -
Can boot in windows but not imac
I can start my imac by pressing down the option button on startup, but I can only get on windows partition. When I try to start up in mac, I get the grey screen with the apple logo. I have tried everything. Is there a way to fix the problem with the start up/boot up on the windows side?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 3
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 4
Boot in safe mode. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 7
Repeat Step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 8
This step applies only to older Macs (not current models) that have a logic-board ("PRAM") battery. Both desktop and portable Macs used to have such a battery. The logic-board battery is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. If you can't get to an Apple Store, go to another authorized service provider. -
I can boot into bootcamp,but cant boot to MAC OS.
I tried disk utility, and I cant mount my mac hdd and when i run hardware test it says perfectly fine. What do I do ?
When I try to login into Mac grey progress bar appears and than computer shuts down on its own.
Please give me solution.
Please help.flavinator wrote:Update: So, I'm a little lost. I got all the packages installed. I edited the xinit file the way it says to. I chmod it.
Why did you chmod it? This is not in the instructions.
flavinator wrote:When I startx though, X has no file or directory, and don't see where it says how to create one.
What does this mean? Is this some translation or interpretation of an error message? Post the *actual* output.
flavinator wrote:I thought it would do that when XDM installed.
XDM is also not part of the instructions for testing TWM. If you start doing random other steps, we will not be able to help you as we will not understand what state your machine is in.
flavinator wrote:Update 2: I got startx to run, but then it fails with "Using system config directory "/usr/share/X11/xorg.conf.d" 0x00c00000, type = 1) Invalid argument (22) (II) Server terminated successfully"
Please post the *full* output. The server terminated successfully suggests a problem with your xinitrc, so as ewaller requested, we'll need to see that - after you provided the actual output and error messages you are getting. -
I can not get or send mail from my iPhone, iCloud, and desktop mail. All are the same account, password is right and working. When the problem first happened I updated to a new password.
The Mail and the phone are telling me ( "The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “k****n******2”}
From the iCloud account i get a message saying mail could not be loaded and the details. Which i have copyed below.
Any thoughts or anyone I can ring ? This was a paid for mobile me account.
Thanks
Running 10.72
ORIGIN
server
TYPE
error
BUILDNUMBER
1FCS29.34215
TIME
Sun Dec 11 2011 10:49:50 GMT+0000 (GMT) (1323600590380)
HOST
www.icloud.com
USERAGENT
Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_2) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7
PRSID
217870346
RECENTLOGMESSAGES
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: MAIL in main()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 1: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc1074:dispatch('load content')
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: "2.0 Waiting for Content" handled event 'load content' (no transition)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Attempting to load 'addresses'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' is not loaded, loading now.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Loading JavaScript file in 'addresses' -> '/applications/mail/frameworks/addresses/en-us/1FCS29/javascript.js'
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Object:sc3099:initStatechart()
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: -> entering "9 Address List Not Visible"
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: --> Request 2: GET to https://p03-contactsws.icloud.com:443/co/addressbook/?order=first,last&locale=en _US, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' finished loading.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Evaluating and invoking callbacks for 'addresses'.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: SC.Module: Module 'addresses' has completed loading, invoking callbacks.
Sun, 11 Dec 2011 10:49:22 GMT: DEBUG: APPLICATION: Received applicationWillBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: WARN: APPLICATION: Received applicationDidBecomeActive
Sun, 11 Dec 2011 10:49:23 GMT: DEBUG: <-- Response 2: 200 (1257ms), headers: Cache-Control=no-cache, no-store, private, Content-Type=application/json; charset=UTF-8 body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:1
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: --> Request 3: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:25 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:2
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: --> Request 4: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:29 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:3
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: --> Request 5: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:33 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:4
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: --> Request 6: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:37 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Got HTTP 500 : Redirecting request: /wm/preference : Redirect count:5
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: --> Request 7: POST to https://p99-mailws.icloud.com:443/wm/preference, headers: Content-Type=text/plain, body: (omitted)
Sun, 11 Dec 2011 10:49:40 GMT: DEBUG: Request out: /wm/preference-list-->1323600562085/1
params: {"locale":"en-us","timeZone":"Europe/Dublin"}
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: willReceive: Status:500, Request:/wm/preference
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: <-- Response 7: 500 (4248ms), headers: Content-Type=text/html body: (empty)
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: Request in: /wm/preference-list-->1323600562085/1,500,4249ms
Sun, 11 Dec 2011 10:49:44 GMT: DEBUG: ServerPreferencesDataSource.retrieveResponse error = -1/500/guid=serverPrefsGuid
Sun, 11 Dec 2011 10:49:44 GMT: ERROR: CoreMail handled error 13002 before exiting MailSpent at least 40 min talking to apple support, to sort it out. luckly not at my cost. After trying lots of things and speaking to a higher grade support person I was given a temp password which did the trick. I then was able to reset that with my own password.
The impression i got was no one knowns what the problem is and resetting the password at the apple end works. Not sure if you would be able to self fix. -
I can get into GMail but not my Calinder it is blocked by firefox ?
GMail runs fine ... but when i try to use my calender I get.
The page isn't redirecting properly. I don't know what to do ?
thanks Help if you can :)This can be often be fixed by clearing the Google cookies and the cache. For details on how to do that see [[deleting cookies]] and [[how to clear the cache]].
-
[Solved] Can't boot into Arch after deleting some partitons
About 6 months ago I installed Arch on a machine that used to run Ubuntu. Had some trouble at the time getting to boot into Arch but somehow managed. Now eventually decided to delete the old Ubuntu partitons to free up some space using gparted. Arch partition number changed from sda12 to sda6.
On rebooting after deleting ubuntu partitions with gparted, I got an ubuntu splash screen and a whole lot of ubuntu boot options. Somehow these were all contained in my Arch's /boot/grub/menu.lst. Arch is all on one partition and no separate boot partition (which I had with Ubuntu - maybe I haven't deleted that and this is the problem?). Will need to check that out.
I can chroot into Arch and did the following -
grub> find /boot/grub/stage1
(hd0,5)
grub> root (hd0,5)
Filesystem type is ext2fs, partition type 0x83
grub> setup (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/e2fs_stage1_5" exists... yes
Running "embed /boot/grub/e2fs_stage1_5 (hd0)"... 16 sectors are embedded.
succeeded
Running "install /boot/grub/stage1 (hd0) (hd0)1+16 p (hd0,5)/boot/grub/stage2 /boot/grub/menu.lst"... succeed
ed
Done.
grub>
The Arch /boot/grub/menu.lst had a whole lot of ubuntu stuff in it but I edited to the following -
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
title Arch uuid
#root (hd0,5)
uuid d15cf4f9-18ca-4ec5-95bc-db0f6f264736
kernel /boot/vmlinuz26 root=/dev/sda6 ro vga=775
intrd /boot/kernel26.img
title Arch hd
root (hd0,5)
kernel /boot/vmlinuz26 root=/dev/sda6
intrd /boot/kernel26.img
I have a bootinfo script which gives the following (from the chroot environment) -
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
sda6: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Mounting failed:
mount: /dev/sda5 already mounted or sda5 busy
mount: /dev/sda6 already mounted or sda6 busy
sda7: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sda3: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /etc/fstab
sda4: _________________________________________________________________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/menu.lst /grub/grub.cfg /grub/core.img
sdb1: _________________________________________________________________________
File system: xfs
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 417,690 6,554,519 6,136,830 82 Linux swap / Solaris
/dev/sda2 25,414,954 1,465,144,064 1,439,729,111 5 Extended
/dev/sda5 25,414,956 1,360,287,809 1,334,872,854 83 Linux
/dev/sda6 1,360,287,873 1,423,198,349 62,910,477 83 Linux
/dev/sda7 1,423,198,413 1,465,144,064 41,945,652 83 Linux
/dev/sda3 6,554,520 25,414,829 18,860,310 83 Linux
/dev/sda4 * 63 417,689 417,627 83 Linux
Drive: sdb ___________________ _____________________________________________________
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 1,953,523,711 1,953,521,664 83 Linux
blkid -c /dev/null: ____________________________________________________________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 2a95d85a-45fe-4584-88dd-0ee20e651ec5 swap
/dev/sda2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="2"
/dev/sda3 32495e1a-227c-4d23-9f63-b1319def0dd9 ext3
/dev/sda4 d6dc69b0-967d-4886-b62d-8c0d6be06b41 ext3
/dev/sda5 37971286-b8d3-4a1b-9f94-4008288fed6d ext3 data
/dev/sda6 d15cf4f9-18ca-4ec5-95bc-db0f6f264736 ext3 30GB-02
/dev/sda7 eb736131-b558-4404-9b83-7f1e6d9e76ae ext3 var
/dev/sda: PTTYPE="dos"
/dev/sdb1 0e83045d-a0bd-4d36-b61d-bdb905130dc2 xfs 1TB-04
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda12 / ext3 (rw,commit=0)
=============================== sda3/etc/fstab: ===============================
# /etc/fstab: static file system information.
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1 = swap
/dev/sda1 none swap sw 0 0
# /dev/sda3 = root
#UUID=32495e1a-227c-4d23-9f63-b1319def0dd9
/dev/sda3 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda4 = boot
# UUID=d6dc69b0-967d-4886-b62d-8c0d6be06b41
/dev/sda4 /boot ext3 relatime 0 2
# /dev/sda5 = home
# UUID=670eee83-0a3e-429c-863f-b9ecced9f97e
/dev/sda5 /home ext3 relatime 0 2
#/dev/sda6
#UUID=37971286-b8d3-4a1b-9f94-4008288fed6d
/dev/sda6 /home/ben/Data ext3 defaults,relatime 0 0
# /dev/sda7
# UUID=fdb14ca4-d71d-489f-a00e-6e608770674c
/dev/sda7 /var ext3 relatime 0 2
# /dev/sda8
/dev/sda8 /opt ext3 relatime 0 2
# /dev/sda10 - Arch
/dev/sda10 /mnt/arch ext3 relatime 0 2
# Not sure what this is doing here
# Have commented it out - May be the reason why xbmc and mythtv were crashing on dvd insert and play
# /dev/hda /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
# /dev/sde1
# uuid appears to be 644406B3570C1846 -> ../../sde1
#/dev/sde1 /home/ben/Data/TVRecordings-1TB01 xfs defaults,relatime 0 0
#1TB-01
UUID=76f3823a-81dc-45c9-a0b7-2bc6c3beb2f8 /media/1TB-01 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-02
UUID=59cbf7a1-7008-40d0-96ed-c6f231823d4f /media/1TB-02 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 1TB-03
UUID=0e936800-3c53-4b87-abc8-19be0ffca7f9 /media/1TB-03 xfs noatime,nodiratime,allocsize=512m 0 0 #remove
d defaults, relatime
# 750GB-02 ext3 Partition
# UUID giving problems, trying with dev
# UUID=c23b9c9a-66fc-4256-9211-73156c1ac64a /media/750GB-02_ext3 ext3 defaults,relatime 0 0
/dev/sde2 /media/750GB-02_ext3 ext3 defaults,relatime 0 0
============================= sda4/grub/menu.lst: =============================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
# examples
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,3)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-26-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-26-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,3)
kernel /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
initrd /initrd.img-2.6.32-22-generic
title Ubuntu 10.04.1 LTS, memtest86+
root (hd0,3)
kernel /memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
============================= sda4/grub/grub.cfg: =============================
# DO NOT EDIT THIS FILE
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 32495e1a-227c-4d23-9f63-b1319def0dd9
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-26-generic ...'
linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-26-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-24-generic ...'
linux /vmlinuz-2.6.32-24-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-24-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-23-generic ...'
linux /vmlinuz-2.6.32-23-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-23-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash
initrd /initrd.img-2.6.32-22-generic
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu -
-class os {
recordfail
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
echo 'Loading Linux 2.6.32-22-generic ...'
linux /vmlinuz-2.6.32-22-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.32-22-generic
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,4)'
search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41
linux16 /memtest86+.bin console=ttyS0,115200n8
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Arch Linux (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26.img
menuentry "Arch Linux Fallback (on /dev/sda10)" {
insmod ext2
set root='(hd0,10)'
search --no-floppy --fs-uuid --set 26851879-58d1-4d65-90b4-e0845fe1176c
linux /boot/vmlinuz26 root=/dev/sda10 ro
initrd /boot/kernel26-fallback.img
#### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
# From Arch grub menu.lst
# (0) Arch Linux
#title Arch Linux [/boot/vmlinuz26]
#root (hd0,0)
#kernel /vmlinuz26 root=/dev/sda3 ro
#initrd /kernel26.img
#Note: With a separate boot partition, omit /boot from the path, (i.e. type set prefix=(hdX,Y)/grub and insmod
(hdX,Y)/grub/linux.mod).
#This introduces the "linux" and "initrd" commands, which should be familiar (see #Configuration).
#An example, booting Arch Linux:
#set root=(hd0,5)
#linux /boot/vmlinuz26 root=/dev/sda5
#initrd /boot/kernel26.img
#boot
###menuentry "Arch1" {
###insmod ext2
###set root='(hd0,10)'
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
###search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UU
ID
###linux /boot/vmlinuz-26 root=635d7d02-3f5b-4af6-9c74-16b2af8cc7fd ro quiet splash # ARCH'S ROOT UUID
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch2" {
###insmod ext2
###set root='(hd0,4)' #= TRYING UBUNTU'S BOOT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
###menuentry "Arch3" {
###insmod ext2
###set root='(hd0,10)' #= TRYING UBUNTU'S BOOT IN HD FORMAT
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 = FOR UBUNTU THIS IS THE BOOT
PARTITION
#linux /vmlinuz-2.6.32-26-generic root=UUID=32495e1a-227c-4d23-9f63-b1319def0dd9 ro quiet splash = FOR
UBUNTU THIS IS THE ROOT PARTITION
#initrd /initrd.img-2.6.32-26-generic
#search --no-floppy --fs-uuid --set d6dc69b0-967d-4886-b62d-8c0d6be06b41 # UBUNTU'S BOOT PARTITION UUID
###linux /boot/vmlinuz-26 root=/dev/sda10 ro quiet splash # TRYING ARCH'S ROOT DEVICE FORMAT
###initrd /boot/kernel26.img
# /dev/sda10 uuid = 635d7d02-3f5b-4af6-9c74-16b2af8cc7fd - obtain using ls -l /dev/disk/by-uuid/
### END /etc/grub.d/40_custom ###
=================== sda4: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: grub/menu.lst
.0GB: grub/stage2
.0GB: initrd.img-2.6.32-22-generic
.0GB: initrd.img-2.6.32-23-generic
.1GB: initrd.img-2.6.32-24-generic
.1GB: initrd.img-2.6.32-26-generic
.0GB: vmlinuz26
.0GB: vmlinuz-2.6.32-22-generic
.0GB: vmlinuz-2.6.32-23-generic
.1GB: vmlinuz-2.6.32-24-generic
.0GB: vmlinuz-2.6.32-26-generic
=============================== StdErr Messages: ===============================
No volume groups found
mdadm: No arrays found in config file or automatically
[/quote]
Output of fdisk -l from chroot is -
[quote]Disk /dev/sda: 750.2 GB, 750155292160 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465147055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000b084
Device Boot Start End Blocks Id System
/dev/sda1 417690 6554519 3068415 82 Linux swap / Solaris
/dev/sda2 25414954 1465144064 719864555+ 5 Extended
/dev/sda3 6554520 25414829 9430155 83 Linux
/dev/sda4 * 63 417689 208813+ 83 Linux
/dev/sda5 25414956 1360287809 667436427 83 Linux
/dev/sda6 1360287873 1423198349 31455238+ 83 Linux
/dev/sda7 1423198413 1465144064 20972826 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x00025bd3
Device Boot Start End Blocks Id System
/dev/sdb1 2048 1953523711 976760832 83 Linux
I need to post this now and come back from a different machine to note the error messages I am now getting on boot. ...
Note that when I boot and press esc to get the menu I get the menu.lst I created (in the second quote) above in /dev/sda6, ie the one with the Arch hd and uuid entries - so grub is looking there and finding that menu.lst, but something goes wrong after that.
OK. Have now booted the machine and after pressing esc and selecting the uuid entry (the same thing happens with the hd entry) I get a whole lot of stuff, but what seems relevant is (typing it out) -
List of all partitions:
No filesystem could mount root, tried:
Kernel panic - not syncing: VS: Unable to mount root fs on unknown-block(0,0)
Pid: 1, comm: swapper Not tainted 2.6.39-Arch #1
If anyone can help I'd really appreciate it. This is my MythTV machine so the WAF is about to take a big dive!
If I could just install grub to the MBR as if this was a new installation of Arch that would be great.
I am really lost as to what is going on, which I'm sure is evident.
Thanks a lot
belbo
Last edited by belbo (2011-08-12 13:31:23)Hi. Unfortunately that didn't help.
So next, based on this post https://wiki.archlinux.org/index.php/Ke … el_version I chrooted into Arch and (a) rolled back and (b) reinstalled my kernel but that didn't help either. I suspected it wouldn't because the kernel was working fine before I deleted the partitions in question.
[2011-08-08 23:32] ==> Image generation successful
[2011-08-08 23:32] upgraded kernel26 (2.6.39.3-1 -> 2.6.39.3-1)
I then did a pacman -Suy and the linux package has now replaced kernel26. ( See this wiki entry http://www.archlinux.org/news/changes-t … filenames/). I didn't change anything in menu.lst owing to this and it seems there is no need to. Unfortunately this hasn't helped either - still getting the kernel panic.
Pacman.log relating to the new kernel package below -
[2011-08-09 00:22] Running 'pacman -Suy'
[2011-08-09 00:22] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:23] Running 'pacman -Suy'
[2011-08-09 00:23] synchronizing package lists
[2011-08-09 00:23] starting full system upgrade
[2011-08-09 00:26] removed python-mygpoclient (1.5-1)
[2011-08-09 00:26] removed kernel26 (2.6.39.3-1)
[2011-08-09 00:26] warning: /boot/grub/menu.lst installed as /boot/grub/menu.lst.pacnew
[2011-08-09 00:26] upgraded grub (0.97-17 -> 0.97-19)
[2011-08-09 00:26] upgraded icu (4.8-1 -> 4.8.1-1)
[2011-08-09 00:26] upgraded linux-firmware (20110512-2 -> 20110727-1)
[2011-08-09 00:26] >>> Updating module dependencies. Please wait ...
[2011-08-09 00:26] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2011-08-09 00:26] ==> Building image from preset: 'default'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [autodetect]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2011-08-09 00:26] 7079 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] ==> Building image from preset: 'fallback'
[2011-08-09 00:26] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2011-08-09 00:26] ==> Starting build: 3.0-ARCH
[2011-08-09 00:26] -> Parsing hook: [base]
[2011-08-09 00:26] -> Parsing hook: [udev]
[2011-08-09 00:26] -> Parsing hook: [pata]
[2011-08-09 00:26] -> Parsing hook: [scsi]
[2011-08-09 00:26] -> Parsing hook: [sata]
[2011-08-09 00:26] -> Parsing hook: [filesystems]
[2011-08-09 00:26] -> Parsing hook: [usbinput]
[2011-08-09 00:26] ==> Generating module dependencies
[2011-08-09 00:26] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2011-08-09 00:26] 23360 blocks
[2011-08-09 00:26] ==> Image generation successful
[2011-08-09 00:26] installed linux (3.0.1-1)
I don't think I've mentioned that my old menu.lst seems to have disappeared and so must have been on one of the partitions that were deleted. I did have 2 Arch installations when I was setting things up months ago and that menu.lst may have been on the other partition but pointing to this partiton's kernel for booting. Presumably that's possible since this partiton is definitely the one I have been using for the last several months (confirmed by log and other files updated in the last few days etc). Even so, I suppose that probably wouldn't be relevant to this issue, since grub is finding the menu.lst on this partition when it boots so it is looking in the intended place now.
It seems I'm at a bit of a dead end. It seems these kernel panics are usually because there is something wrong with the kernel - which there wasn't with mine (and presumably the kernel in the new linux package is fine) or there is a typo in menu.lst (I can't see one and nobody has pointed one out yet) or menu.lst is pointing to the wrong partition (mine is pointing to the same partition and /boot directory that is found by grub - which is where my boot image is located - so it seems to be correct). I have nevertheless tried editing the menu.lst entry when booting to boot from different partitions but so far that hasn't worked either.
If anybody has other ideas I'd really appreciate it.
If not, some suggestions on re-installing would also be appreciated. I have a recent tar archive of the partition, but presumably reinstalling that wouldn't be of much use since it would just put back what is currently there. I guess that I need to format the partition, create a separate boot partition, do a fresh install of Arch into the formatted partition (and with boot in the new boot partition). And then restore my tar backup (excluding the boot directory) into the formatted partition?
Any assistance greatly appreciated.
Thanks
belbo
Last edited by belbo (2011-08-08 23:17:49) -
IMac running 10.6... I can boot into XP no problem, but Mac partition and Boot CD/DVDs will not go
Have an iMac running 10.6... I can boot into XP no problem, but although the mac partition shows up at (alt key) startup, it just spins for about 5 minutes then restarts. Also, it will not boot from any bootable CD/DVD at all (same spin cycle occurs). Tried about every trick I could research. No warning at all regarding this. Everything was going just peachy then pow... out of nowhere she won't boot. Any ideas
I sugggest you backup the windows xp and start from scratch. This means your disks partition is MBR and not GUID so the mac partitions cant effectively communicate with the EFI partition (bios) and boot.
So boot up using ur mac DVD.
Choose ur language
at the top of the screen, go to tools and open disk utility
highlight your hard drive and hit the partition tab. select 1 partition and make sure its set to format it as GUID and mac HFS+ file system
Reinstall mac os x do all ur updates
use boot camp utility to make a new windows xp partition and installation.
then to select between os's hold down option during startup -
[SOLVED]Ubuntu 11.10 broke grub2, can't boot into arch
Hi, I'm having a little issue with grub2 at the moment, I have Arch installed on seperate /home / and /boot partitions, I installed Ubuntu using the "alongside" option in the installer which has added an option to boot into Arch on the grub bootup screen. However when I boot up into arch I get the follow message:
Waiting 10 seconds for device /dev/hda3
[ numbers] usb 1=-4.2: device descriptor read/all, error -3
ERROR: Unable to find root device '/dev/hda3' .
You are being dropped to a recovery shell
Then I am promptly dropped into a recovery shell.
My root device should be at /dev/sda5, not quite sure what's happened there.
Any ideas on how to get this fixed? I think ubuntu has /boot on it's own parition, along with the rest of /.
Last edited by will.price94 (2012-02-26 12:11:04)DSpider wrote:
hda is an IDE drive.
sda is a SCSI drive (SATA).
Do you have both on your system? Or is Ubuntu getting it wrong?
# sudo fdisk -l
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x568055d5
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT
/dev/sda2 206848 146802687 73297920 7 HPFS/NTFS/exFAT
/dev/sda3 146802688 148828159 1012736 83 Linux
/dev/sda4 148830206 1465147391 658158593 f W95 Ext'd (LBA)
/dev/sda5 148830208 344139775 97654784 83 Linux
/dev/sda6 344141824 781250559 218554368 83 Linux
/dev/sda7 781252608 1257244671 237996032 83 Linux
/dev/sda8 1257246720 1456762879 99758080 83 Linux
/dev/sda9 1456764928 1465147391 4191232 82 Linux swap / Solaris
Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0004c41c
Device Boot Start End Blocks Id System
/dev/sdb1 2048 2930276351 1465137152 83 Linux
Disk /dev/sdc: 1500.3 GB, 1500299395072 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005d269
Device Boot Start End Blocks Id System
/dev/sdc1 2048 2930272255 1465135104 83 Linux
Ubuntu is getting it wrong, I have 2 SATA drives and an external USB drive. -
Transferred certain files to my new Mac from my old computer via memory stick.Can open PDF files but not xlr,aww or wps ones.The important ones are in xlr format.Is there a solution please?
My guess is they don't care. Most likely they're illiterate and don't know what a colon is for. They probably think it's a little-used character. Remember: these are the people who don't know the difference between "deprecate" and "depreciate".
I have the same colon problem as you do. But it's not the biggest problem I have encountered in Lion. If it was only that I'd be Mr. Delighted with Lion. There's worse than having a colon - uh - that won't cooperate. A lot worse, in Lion. -
[SOLVED] Grub won't boot into Arch...
So, this all started when I got this wacky idea of trying Debian on a separate drive.
Installs great, boots up and get a blank screen with blinky cursor..not in the mood to mess with it since I can't find
a reasonable answer for what is wrong with it sooo I boot back into Arch but now I get Error device not found with a "Grub Rescue>" prompt.
Not sure what to do now. I installed grub to the drive I was installing Debian on but it seemed to screw with my precious Arch too
I looked around the forums for help but couldn't find anything.
Also, it goes from post directly to the Grub Rescue prompt
Last edited by PumpkinJack (2011-08-26 07:59:37)edit:
ok here it is:
# Config file for GRUB - The GNU GRand Unified Bootloader
# /boot/grub/menu.lst
# DEVICE NAME CONVERSIONS
# Linux Grub
# /dev/fd0 (fd0)
# /dev/sda (hd0)
# /dev/sdb2 (hd1,1)
# /dev/sda3 (hd0,2)
# FRAMEBUFFER RESOLUTION SETTINGS
# +-------------------------------------------------+
# | 640x480 800x600 1024x768 1280x1024
# ----+--------------------------------------------
# 256 | 0x301=769 0x303=771 0x305=773 0x307=775
# 32K | 0x310=784 0x313=787 0x316=790 0x319=793
# 64K | 0x311=785 0x314=788 0x317=791 0x31A=794
# 16M | 0x312=786 0x315=789 0x318=792 0x31B=795
# +-------------------------------------------------+
# for more details and different resolutions see
# https://wiki.archlinux.org/index.php/GRUB#Framebuffer_resolution
# general configuration:
timeout 5
default 0
color light-blue/black light-cyan/blue
# boot sections follow
# each is implicitly numbered from 0 in the order of appearance below
# TIP: If you want a 1024x768 framebuffer, add "vga=773" to your kernel line.
# (0) Arch Linux
title Arch Linux
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/6ab6f3ca-2c64-4264-97aa-10819e4561ed ro
initrd /initramfs-linux.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/disk/by-uuid/6ab6f3ca-2c64-4264-97aa-10819e4561ed ro
initrd /initramfs-linux-fallback.img
# (2) Windows
#title Windows
#rootnoverify (hd0,0)
#makeactive
#chainloader +1
Last edited by PumpkinJack (2011-08-26 02:42:08) -
Screen 'flicker'/artifacts after boot into arch
i experience some sort of flickering/artifacts (dunno how to call it, it's like pixels flying across the screen) after i boot into arch. even when i'm (still) in a tty with no x session running. (before booting into arch, while in the grub menu, it's ok)
it looks pretty much like this.
my gpu is an ati radeon hd4570, i have the free radeon driver (xf86-video-ati) installed.
not sure whether it can be a driver issue though, because it happens even when i'm not in a graphical session?
unfortunately i don't know what to do or what to look at to fix this. investigating this issue i'm led to believe it could have something to do with grub or kernel settings or sth, but i have 0 experience with configuring either.
i'm dualbooting with ubuntu 14.04 btw, which also runs the radeon driver, and i don't have the problem there.
i'd appreciate any sort of help!
(this is my first time posting here, i apologize if i ignored any forum etiquette)
Last edited by weisbrot (2015-02-18 20:49:05)weisbrot wrote:my gpu is an ati radeon hd4570, i have the free radeon driver (xf86-video-intel) installed.
For Radeon you should use xf86-video-ati, not xf86-video-intel. -
I have a new issue with all DPs.
When I pxe boot, it will boot into WinPE but then it will fail and reboot after the step: “Preparing network connections”
I have tried reinstalling the DP and MP. Also redistributing the boot image.
When I press F8 to go into debug mode, ipconfig show me an IP address and I am able to ping my Management point, my DHCP server and also my Distribution point.
I have attached the smsts.log file.
<![LOG[LOGGING: Finalize process ID set to 900]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904"
file="bootshell.cpp:1055">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="util.cpp:964">
<![LOG[Debug shell is enabled]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:1066">
<![LOG[Waiting for PNP initialization...]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\SMSIMAGES\EVN0002F\BOOT.EVN0002F.WIM]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:302">
<![LOG[Booted from network (PXE)]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:317">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:319">
<![LOG[Found config path X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:548">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:582">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:599">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:613">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="10:43:28.956+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[Starting DNS client service.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:666">
<![LOG[Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908"
file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116"
file="tsmbootstrap.cpp:1165">
<![LOG[Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:1166">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="resourceutils.cpp:169">
<![LOG[Current OS version is 6.2.9200.0]LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:3094">
<![LOG[Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1363">
<![LOG[TsPxe.dll loaded]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1373">
<![LOG[Device has PXE booted]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="tspxe.cpp:134">
<![LOG[Variable Key Len: 69]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="10:44:14.028+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="10:44:14.106+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:146">
<![LOG[Successfully downloaded pxe variable file.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tspxe.cpp:187">
<![LOG[we are booted using PXE]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2673">
<![LOG[we are booted using PXE and we use a generated password]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2678">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.122+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Verifying media password.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:271">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Found network adapter "Intel(R) 82577LM Gigabit Network Connection" with IP Address 10.9.2.50.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="tsmbootstraputil.cpp:517">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Entering TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:527">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Setting LogMaxSize to 1000000]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:555">
<![LOG[Setting LogMaxHistory to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:556">
<![LOG[Setting LogLevel to 0]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:557">
<![LOG[Setting LogEnabled to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:558">
<![LOG[Setting LogDebug to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:559">
<![LOG[UEFI: false]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:569">
<![LOG[Loading variables from the Task Sequencing Removable Media.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:584">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Setting SMSTSMP TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSMediaGuid TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSBootMediaPackageID TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPSPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSIISSSLState TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSLaunchMode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSMediaPFX TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSPublicRootKey TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteCode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteSigningCertificate TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSUseFirstCert TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx64UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx86UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Root CA Public Certs=]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:615">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:621">
<![LOG[Support Unknown Machines: 0]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:632">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:675">
<![LOG[No hook is found to be executed before downloading policy]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:699">
<![LOG[Authenticator from the environment is empty.]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:838">
<![LOG[Need to create Authenticator Info using PFX]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:850">
<![LOG[Initialized CStringStream object with string: 6b7b5b1a-8a29-40a1-af6b-008746965168;2014-08-13T18:44:14Z.]LOG]!><time="10:44:14.200+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="stringstream.cpp:101">
<![LOG[Set media certificate in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:9401">
<![LOG[Set authenticator in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:7734">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SS01.adskevents.local:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="1"
thread="1116" file="libsmsmessaging.cpp:8604">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:432">
<![LOG[Error. Received 0x80072ee2 from WinHttpSendRequest.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="libsmsmessaging.cpp:8870">
<![LOG[hr, HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8919)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="libsmsmessaging.cpp:8919">
<![LOG[sending with winhttp failed; 80072ee2]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="libsmsmessaging.cpp:8919">
<![LOG[m_pHttpTransport->Send (0, 0, pServerReply, nReplySize), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5159)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:5159">
<![LOG[MPKeyInformation.RequestMPKeyInformationForMedia(szTrustedRootKey), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9410)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:9410">
<![LOG[Failed to get information for MP: http://SS01.adskevents.local. 80072ee2.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="tsmbootstraputil.cpp:1518">
<![LOG[sMP.length() > 0, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1526)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmbootstraputil.cpp:1526">
<![LOG[TSMBootstrapUtil::SelectMP ( sSMSTSMP.c_str(), sMediaPfx.c_str(), sMediaGuid.c_str(), sAuthenticator.c_str(), sEnterpriseCert.c_str(), sServerCerts.c_str(), nHttpPort, nHttpsPort, bUseCRL, sSiteCode, sAssignedSiteCode, sMP, sCertificates, sX86UnknownMachineGUID,
sX64UnknownMachineGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,907)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:907">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:1419">
<![LOG[GetPolicy(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2492)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2492">
<![LOG[RunWizardForPXE(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2834)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2834">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)]LOG]!><time="10:44:35.281+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="tsmbootstrap.cpp:1226">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1238">
<![LOG[Execution complete.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell"
context="" type="0" thread="908" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908"
file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 900]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="0" thread="908" file="tslogging.cpp:584">Every time a query is sent to the MP, it receives 0x80072ee2 which translates to "The operation timed out". This has nothing to do with your MP or DP though so reinstalling them won't make any difference.
This error is indicative of network issues -- basically, the "client" is not getting a response back in a timely manner (and probably not at all). Assuming the MP is healthy though, then only other piece of the puzzle is the network.
You can try setting the SMSTSAssignmentsDownloadRetry and SMSTSAssignmentsDownloadInterval task sequence variables in the boot image to increase the client's tolerance for latency or other weirdness in the network. This has worked for many.
If that doesn't work, you'll have to break out a sniffer and watch the traffic to see what's going on at a network level.
Jason | http://blog.configmgrftw.com -
My movies and music videos won't show up on my computer screen, I can hear the sound but not see the video how do I fix this? I'm not sure what to do as far as turning my purchased movie into DVD goes either. I just want to put the movie onto a DVD disc but my itunes won't even show that I have a blank disc in the drive, I'm not sure what is wrong or how to fix this, any help at all would be much appreciated.
Hi @anthony7722 ,
Thank you for your query, I will do my best to help!
I grasp that you uninstalled the Intel graphic driver and the catalyst control. You reinstalled the Intel driver and now you can view and hear videos on the Internet but you are unable to set the resolution as high as previously.
When I checked the specifications for your notebook I see that you have switchable graphics.
Here are two links that I believe will help.
Overview of Switchable Graphics or Dual GPUs
Switchable Graphics on Notebooks Configured with Intel and ATI GPUs
Here is a link to HP Pavilion dv7-6150eb Entertainment Notebook PC Drivers
Please try this process.
1. Download the chipset driver, and both graphic drivers and save them but do not install them yet
2, Delete the chipset driver and install the updated one.
3. restart your notebook
4.Delete the Intel driver and install the updated one
5. restart your notebook
6. Delete the AMD driver and install the updated driver.
You should now have a Catalyst Control Center.
This should now allow you to use the higher graphic card which should support the higher resolution.
I hope this helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Bonjour - Mac A can see Mac B but not vice versa
Hi
Very odd behaviour with Bonjour. Up until yesterday, my macbook pro (call it A) would see my mac pro (B) - it would appear automatically in A's sidebar, I could listen to B's iTunes library on A and so on. No problem and there hasn't been for a couple of years. B could not see A - but I didn't really need it to and this wasn't an issue.
Suddenly, this morning, the situation is completely reversed. A can no longer see B at all, but B can see A.
I can connect both ways by using 'Connect', I can ping both ways, but I can't get A to discover B using Bonjour.
The only think I've done that I can think can have caused the changes is to use Omnifocus sync (with B holding the sync server) - it worked fine all day, but overnight Bonjour seems to have reversed itself as described above.
Bonjour Browser shows me that B can see A, but A can't see B. I have identical settings on both machines for sharing, network, firewall (all everything).
Bizarrely, for one two minute period a couple of hours ago, the situation reversed itself (A could see B but not vice versa), but then immediately went back to B can see A, but not vice versa.
Both computers are running the same version of Leopard (10.5.7). I've reinstalled the OS on B, just to see, but this hasn't improved matters.
I can find nothing on google or this discussions forum to explain this bizarre behaviour - most support threads seem to peter out without being resolved. Has anyone any idea what's going on please? I'm quite happy getting stuck into the command line, if that's needed.
Many thanks
DavidThe Macbook Pro is connected wirelessly to the router, the Mac Pro connects to the same router by ethernet.
As far as I'm aware, I'd made no changes to any of the setups (computers or router) before the problem occurred: bonjour worked fine, but in one direction only (the MBP could see the Mac Pro, but not vice versa). Now, the Mac Pro can see the MBP, but not vice versa - and this is a problem because my printer and itunes server both sit on the Mac Pro.
I've set all the firewall and security settings I could find to transparent access - and (except for the obvious difference between the wired and wireless links), the setups are identical on both computers.
By the way, I can connect to the Mac Pro easily enough and transfer files, I just can't see it via bonjour or use Screen Sharing (again the settings haven't changed since they were working!)
Many thanks
David
Many thanks
David
Maybe you are looking for
-
Can I cause checking a box to add 1 to a calculated form field? I have a field that sums the numbers entered in several previous fields and need to be able to add "1" if a checkbox is selected as well.
-
Photoshop Elements 10 Help with image jumping around the screen
I'm using a trial version of Elements 10 that I'm interested in buying it but 50% of the time when I click on an image so that I can click and drag it around the screen, it jumps off the screen. I have been using Elements 6 and never had this proble
-
FAGL_FC_VAL - Valuation isnu00B4t working
Hi there, I´m running the Foreign Valuation Currency report (t code FAGL_FC_VAL), but noted that there are some missing open item documents that don´t appear in the report. They exist, because I can see them in FBL1N, but not in the report. Besides,
-
Using cin node in labview error happen
my name is Juan Chen , I wish to use cin node to calculate crc check code in la view. I use an array as input and a unsigned word as output. when I use while loop, error not enough memory or the memory can only read happen. what is the reason,please.
-
Can't access some website after updating to OS 10.7.2
So after I updated my OS to 10.7.2 yesterday, I can't seem to open sites such as: megashare.info, and mytvline.com which are usually for free online stream of videos. I dunno why. Can you help me??