I can call out or recieve incoming call on the Iphone 4s.

Iphones 4s, on the sprint network. I can not place an outgoing call or recieve an incoming call.

Hello cobyco3,
Thanks for using Apple Support Communities.
To troubleshoot this issue of not being able to place calls on your iPhone please follow the steps in the article below.
iPhone: Troubleshooting issues making or receiving calls
http://support.apple.com/kb/TS3406
Take care,
Alex H.

Similar Messages

I can call out but all incoming calls are going directly to VM with no signal that I missed a call or have VM. I can send/receive text messages from other iPhone/iPad/iTouch users, I am assuming this is really "iMessage." Is it apple software?

I have spent hours on the phone with Apple and AT&T. I went thought reset, on/off, etc, etc with both companies to no avail. Each company pointed fingers at the other....as being the source of the problem.
Problems: Suddenly ALL incoming calls were going directly to VM with no signal I missed calls and/or had VM. I was also unable to receive all Text Messages...Oddly, I could send text messages to anyone (even non-apple users but I could not receive their responses)........then I when I got home I started receiving text messages from other apples users ONLY. I assume now - iMessage kicked in and I could text (send/receive) other iPhone/iPad/iTouch users ONLY. ....yes, I could still (send) text messages to my husband's blackberry (he received my messages fine) but my phone would NOT receive his text respones.
Finally, I googled the problem and found this community where other people have had the exact same problems! One person said he "turned off 3 G" which was the solution for him....so I did the same and VIOLA! My problem solved! Nevermind the fact that I pay for 3G and cannot use it....so here's my question, if 3G is the problem on my phone is this an APPLE issue or a NETWORK problem? Do I purchase a new phone and slip in my same SIM card and hope the same does not occur or do I get a whole new SIM card and phone? What is the long term resolution to this problem?
I am happy however to find that my problem is NOT an isolated incident and wish Apple or AT&T had told me this is not so uncommon because I thought (based on the baffled response from Apple) that this has never occurred before. Where is Steve Jobs when we need him?

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

When apple iPhone 4s battery completely drain out and recharge again,no out going or incoming call can be sent or received

when apple iPhone 4s battery completely drain out and recharge again,no out going or incoming call can be sent or received until rest the phone completly. Do we have any solution for this?

The problem was only for calls and network and other functionlities were working fine. So i did reset through settings-general-Reset-Reset all settings and re tried then it worked fine. But this is only a temporary solution need a permanent fix.

Need help Creating a translation pattern that adds dial out digits to incoming calls

I came across an article yesterday and it showed the steps how to fix Missed Call/Received Call numbers so that you can dial them from the menu correctly (auto-add a 9, etc.)?
I tried it this morning and came up with this translation pattern:
voice translation-rule 6
rule 1 /^201$.*$/ /8\1/
rule 2 /$..........$/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
This translation pattern rule 1 adds the dial out character 8 and strips 201 for local calls. Rule 2 adds dial out character 8 and adds 1 for long distance. The purpose of this translation rule is when the ephone receives the phone call the characters 8 and 1 are added so when you quickly need to redial you do not have to edit the number and add 8 for each call.
I tested the translation-rule:
ROUTER-2911#test voice translation-rule 6 9082121231
Matched with rule 2
Original number: 9082121231     Translated number: 819082121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#test voice translation-rule 6 2019121231
Matched with rule 1
Original number: 2019121231     Translated number: 89121231
Original number type: none      Translated number type: none
Original number plan: none      Translated number plan: none
ROUTER-2911#
Issue is I am not sure with my inbound call leg if it can even work. We dial out through the SIP Trunk and the incoming is translated to the AutoAttendant on Cisco Unity Express.
voice translation-rule 1
rule 1 /2015552100/ /2003/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
dial-peer voice 9 voip
description **Incoming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
call-block translation-profile incoming BLOCKED-INCOMING
call-block disconnect-cause incoming call-reject
session protocol sipv2
session target dns:nd01-04.fs.SIPPROVIDER.net
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
Can what I am trying to do be done with my current setup?

Hi patldmart012,
The dial-peer 9 that you have attached will not be affected by following config
voice translation-rule 6
rule 1 /^201$.*$/ /8\1/
rule 2 /$..........$/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
Because you have not applied the translation profile "filter_incoming" on the dial-peer.
Could you please provide the exact call flow?
Along with that, If you are facing issue with calls on SIP Trunk, please collect following debugs in a logging buffer and attach the file. I will analyse it and will get back to you.
debug voip ccapi inout
debug ccsip message
debug voice translation
Debug h225 asn1 (If H323 involved)
Debug h245 asn1 (If H323 involved)
Debug MGCP Packets (If MGCP involved)
Also provide the running config of the GW.
These are verbose debugs, so please collect them in the following manner:
Router(config)# service sequence
Router(config)# service timestamps debug datetime msec
Router(config)# logging buffered 30000000 7
Router(config)# no logging con
Router(config)# no logging mon
Router# Clear log
Router# term no mon
<Enable debugs, then wait for issue to occur.>
Router# term len 0
<Enable session capture to txt file in terminal program.>
Router# Undebug all
Router# sh log
Once i have the logs, i will analyse it and will get back to you.
Regards,
Mudit Mathur

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
I continued to use the phone on EDGE mode for two more days until the problem was fixed.
I even got a call back from a tech support guy asking me if my phone was working properly....
I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

After upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

after upgrading to OS5 my i phone is not showing names of incoming callers in my contact directory, i can only see number of incoming caller. Is there any settings to put this right? what can you do?

This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.

My iphone 4 squeals when i make an outgoing call or answer an incoming call. if i put it on spkr phone...the squealing stops

My iphone 4 squeals when i make an outgoing call or answer an incoming call thru the handset....if i switch to spkr...the squealing stops....any ideas??

I am having the same problem. Squeal with handset calls, no squeal with bluetooth in the car or on speaker phone. Some calls have no squeal, but then I can hear the person on the other end, but they cannot hear me. Has anyone come up with a solution? I am going to reset to factory settings and see if that helps.

Are there any apps which will allow local calling using data only that do not require any special numbers called out initially and does not require the receiver to have a similar app or account?

Are there any apps which will allow local calling using data only (not minutes, no extra charge) that do not require any special numbers called out initially and does not require the receiver to have a similar app or account? Just for random local calling.

Yup.
Here is a way you could solve this by adding an extra column and a small lookup table:
The lookup table is here for the copying:
0
1
k
kilo
2
M
mega
3
G
giga
4
T
tera
5
P
peta
6
E
exa
7
Z
zetta
8
Y
yotta
In table 8 (the one on the left in the image) column A is where the values are.
B1=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
this is shorthand for... select cell B1, then type (or copy and paste from here) the formula:
=A1÷(1024^VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 1))&" "&VLOOKUP(INT(LOG(A1, 1024)), Binary Prefixes::A:D, 2)&"B"
select cell B1, copy,
now select all the cells in column B, paste

Imessaging doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

imessaging on ipod touch doesnt work after iOs 6 update, can't send or recieve messages. it isnt the wifi since everything else is working. have tried every solution possible. help?!

Short of a reset to factory settings I've found making sure iMessaging is not left minimised helps. It doesn't seem to keep its connection. So, by closing after each use this helps. I've been doing this since I logged out of iMessaging at least 1/2 doz times and even changed my apple id pw as this had ceased to be recognised. I get fewer send failures now and don't have an inactive send button so much. Having said this its all a bit of a work around as iMessaging isn't behaving as it once did. If over time not resolved will do factory reset. All the best.

Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

Is there an app or way that you can take a single frame out of a video shot on the iPhone and use it as a picture?

I don't know if there is an app, but you can take a snapshot of the video. I do this all the time. You just need to hold down the power and home key once and it will take a snapshot.

HT201263 Hi, I forgot the password of my iphone4s I tried more than ten times and it lock me out with a message to connect the iPhone with itunes on the screen but the itunes doesn't recognise it. What can I do?

Hi, I forgot the password of my iphone4s I tried more than ten times and it lock me out with a message to connect the iPhone with itunes on the screen but the itunes doesn't recognise it. What can I do?

Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Also, see iTunes- Restoring iOS software.

Things my WM 6.1 phone did that I can't find a way to do with the iphone

Hi All iphoners
I have a small list of things that I can't find a way to do with the iphone. I was hoping that someone would be able to help me with this. I know there must be a way to do these but I just have not found it yet.
here they are:
Play video clips from my favorite news web sites.
search my contacts by just typing the name from anywhere in the contact list
Play music and sounds thru by stereo bluetooth headset
Sync my notes and tasks from outlook
setup different tones and alarms for new e-mail, new SMS, so on
voice announcement of who is calling if the caller is in my contacts
Download document to the phone, word, PDF, so on
Mark all e-mail as read with one button
place call from calendar if phone number is in appointment
Beam files from one phone to another
Picture mail
Rotate e-mail while ready e-mail. this works for web pagers but not e-mail
thanks for all the help
Bill

spock4104 wrote:
Play video clips from my favorite news web sites.
depending on who your "favorites" are, they might have an app in the app store which includes videos
search my contacts by just typing the name from anywhere in the contact list
theres a search bar at the top of the contacts list. you type, it searches.
Play music and sounds thru by stereo bluetooth headset
sorry, can only be achieved via devices such as the Sony TMR-BT8iP (http://www.amazon.com/gp/product/B000XRW09Y)
setup different tones and alarms for new e-mail, new SMS, so on
all but SMS is not customizable for now. but even with SMS, you can only choose from those available.
voice announcement of who is calling if the caller is in my contacts
my suggestion is to set a particular ringtone for that person. OR, you can always record yourself saying that person's name, convert it to a ringtone, and use that. (if you dont know how to create your own ringtone, a quick search on this forum should help you out).
Download document to the phone, word, PDF, so on
Beam files from one phone to another
look for "Air Share" in the app store.
Picture mail
it can, you have to do it from the photo, not email tho.
i dont have an answer for the ones i left out. sorry. hope these help.

Can anybody actually RECOMMEND a bluetooth headset for the iPhone?

I see a lot of bad experiences, & not too many good ones.
Can anybody actually RECOMMEND a bluetooth headset for the iPhone? I just need one that works, with very little features (ie: redial button on headset).

I've actually posted another thread, and I don't mean to take over the original members post, but I'm hoping this will help others who may be having the same problems. Thanks to all of you who have posted your results with the various headsets!
I am now on my third iPhone 3G in under six months. The first one would drop calls when the corded Apple headset was plugged in during the call, and the second would cause the caller on the other end to hear an echo when I used the Apple headset. Plus, it did not respond well at all to Bluetooth headsets. Tons of static, call echoes, and noise cancellation not working.
My experience with the Jawbone 2 has been disappointing. I have heard way too many testimonials of satisfied iPhone users who love the JB2, so I'm beginning to think it's just me. I went through FOUR Jawbone 2 devices in under a month, all because of poor sound quality, and the Noise Assassin not working properly.
The white rubber tip sat very well against my cheek, and the default medium earpiece fit perfectly in my ear and was very comfortable to wear. Everything seemed to be in order, but the same problems would arise over and over again. I would get poor sound quality on both ends of the call, and people could hear the tv or the radio playing in the background on my end.
Maybe the structure of my head isn't suited for the JB2, but I have a very normally proportioned head. I refuse to believe it's the device——It has been rated highly by too many people to be the issue. I've all but given up on it, regrettably.
The Plantronics Discovery 665 I tested had issues with static. I would hear it on my end, even thought the phone was no more than two feet away.
I'll give the Plantronics 925 a try, as well as the Blue Ant V1. We'll see...

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files?

Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
For instance I have 1200 photos on my iPhone Camera Roll. Some of these are shots, that I've taken multiple times, some good, some bad. I just want to clean up my Camera Roll, but going through the pictures on the iPhone's small screen is tedious. I'd much rather look at the camera roll's photo's on my Mac, and then decide which files I'd like to keep, and which to delete.
I don't want to import the files, as when I import the files, and delete them from Camera Roll, now the Photo's are not on my phone, and the only way to get them back on my Phone is to Import them back in using iTunes, and then they go into the Picture Library and not the Camera Roll.
In the same way as I can view Pics from my digital camera's SD card on a Mac without having to actually copy them to my computer, is there any app out there that will let me view my iPhone pics without importing them.

gsharp01 wrote:
Is there any way I can view / remove pictures from Camera Roll on the iPhone, on a Mac, without actually importing the files? I just want to view / delete files without importing them.
The short answer is yes.
Connect your iPhone to your computer.
Open Image Capture application.
Click on the 4 little squares at bottom to view them as photos, not a list.
Select the photos them click the No Entry icon at bottom to delete.

HT1349 i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

i updated my iphone which they gave to me with out a sim card and now the iphone is asking for a sim card to activate it what should i do i dont have the sim card?

i had 4 point something i dont know lol but i used to text anyways with my wifi on "textfree app" until i updated like a dummy i didnt know they would ask for the sim card and my day got ruined . all i wanted to know is if i put a sim card like if i buy a at&t card for 4$ on amazon if it would unlock it and i can use it again for i can play angry birds -_- but u kinda made my day better thanks

I can call out or recieve incoming call on the Iphone 4s.

Similar Messages

Maybe you are looking for