I can connect my lexmark printer by usb but not wireless

i can connect my lexmark printer s400 series by usb but not wirelessly any thoughts please

I'm having the same issue. On my MBP 15" OS 10.7.3 the Lexmark printer does not connect to WIFI. It works on the USB connection. In wifi however it will work on the Virtual Box Windows 7 partition.
In my logic this means the printer is properly connected to the wifi (green indicator and working with Virtual Box and Windows 7) The MBP is properly connected to the wifi network as Virtual Box works in the Mac's environment. The printer is present in the System Preferences indicating it is Idle and does have a IP address.
When I do send a document to the printer it just sits in the Que and in System Preferences the status goes to Busy. In the Que it also indicates it is busy until it tmes out and indicate that communication with the printer is a problem.
Thanks for any suggestions.

Similar Messages

HP 3210, OS X, can print w USB but not w WiFi. Can ping and access printers webpage.

I can connect and print on my HP 3210 directly via USB but not via the network. I can ping the printer and access its built in webpage through the network though, so it has network connection. When I try to add a network printer no printer shows up, so I manually add the printers IP address (valid and complete) and the ‘Generic PostScript Printer’ comes up as default. After I installed the printer through USB I can also access the specific 3210 drivers but it doesn't work either.
I once managed to print '%!PS-Adobe-3.0 Query userdict (\004)cvn{(\004) print flush}put', then it continued to feed out blank papers until I canceled. I've tried the IPP, LPD and HP Jetdirect socket protocols together with the universal PostScript driver and the HP 3210 driver. One of the combinations returned the above line. Besides this one exception nothing happens, the printer appears offline.
Computers: One MacBook Pro 15" from 2011 with OS X 10.7.5 and two new MacBook Pro 13" with OS X 10.8
HP Photosmart 3210 All-in-One
Serial Number:
{Removed for privacy}
Firmware Version: R0046xxNx
Printer connected with ethernet cable to router, computers connected over wifi.
It has previously worked on my older MacBook Pro and on a PC I had before. It seems like an installation problem not being able to install the IP printer automatically.
Any help would be highly appreciated, thanks!

It could be that your router does not support Bonjour or it is not enabled. Go into the router settings and look for mDNS or Bonjour and make sure it is enabled.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can connect iPhone to friend's wifi, but not MacBook Pro. Says password is invalid.t

My friend gave me her wifi password so I can connect at her house. I onnected my iPhone with no problems. But when I try to connect my MacBook Pro I keep getting a message that the password is invalid. It's the exact same password I used to connect my phone! recently she had relatives visit and the same thing happened for them. What's up?

You would do better to ask in the Mac Forum - this is the iPad forum.

Can connect to DB via SQL plus but not Toad!

I have installed: 10GR2 on D drive on XP machine, on C drive i have toad and Dev suite 6i (for connecting to old db's). Now, I can sqlplus from command line no problem, but when I try to connect through toad it says no listener, I also cannot tnsping my 10G db. Any idea's?

steve contents of Devsuite tnsnames are here: the 10G db is LOCAL
LOCAL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = weres09023)
(PORT = 1521)
(CONNECT_DATA =
(SERVICE_NAME = LOCAL)
EISPATCH =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = rmerptest)
(PORT = 2011)
(CONNECT_DATA =
(SERVICE_NAME = EISPATCH)
MKPEURT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = KARL)
(PORT = 1521)
(CONNECT_DATA =
(SID = MKPEURT)
MKPEUR =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = BARNEY)
(PORT = 1521)
(CONNECT_DATA =
(SID = MKPEUR)
UAT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbtest)
(PORT = 1800)
(CONNECT_DATA =
(SID = UAT)
DEV11 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = drerptest)
(PORT = 1700)
(CONNECT_DATA =
(SID = DEV11)
PROD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbprod)
(PORT = 1600)
(CONNECT_DATA =
(SID = PROD)
UPGD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = tcp)
(HOST = rmdbtest)
(PORT = 2200)
(CONNECT_DATA =
(SID = UPGD)
which net manager? the 10G home or the Devsuite home?

Can print via usb, but not via wireless network

My new MacBook Pro prints to my Epson RX500 when the printer is connected via USB to the MBP. However, when the the printer is connected by USB to my desktop PC running XP, the MBP does not print to it. I can see disks and transfer files wirelessly among desktop PC, laptop PC & MBP. The MBP finds the RX500 on the network, and has a driver for it. I can set it as the Mac's default printer. When I print, say from OpenOffice or TextEdit, the dialogs seem ok. Sometimes I see the print queue icon wink in and out on the dock. But the document doesn't get printed. The desktop says the printer is shared, and I can print over the wireless network from my PC laptop running XP.
One of the Apple troubleshooting pages suggests that I should have the same driver version on my XP desktop and my Snow Leopard MBP. I don't know how to tell what version the PC is running.
Any suggestions?

Just to be sure - you know that you can't use Epson's "USB-only" driver for printing to a Windows-shared printer?
You must use the Gutenprint driver - that's why Apple included the Gutenprint drivers in OS X.
Updates for Gutenprint:
http://gimp-print.sourceforge.net/MacOSX.php

Photosmart 7515 connect via USB but not wireless, Device not found on Network

Purchased a 7515 all-in-one, was able to setup wirelessly to MacPro but has lost ability to connect wirelessly. This happened with OS X Lion and nor MountainLion. Have a TimeMachine Airport. Printer connects to network but during setup from MacPro, repeatedly get "Device Not Found on Network" after stepping through wireless installation setup screens. I have reset router, printer, firmware updates, software updates.... at wits end. I have followed the instructions on the below resource page link with no luck. Use WPA-PSK encryption (Automatic AES or TKIP) on network and diagnostics on printer pass.
Please help anyone!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02946597&tmp_task=solveCategory&cc=us&dlc=en&la...

It sounds like the Macs and the printer just aren't communicating.
If you press the network icon on the printer, does it indicate it is connected to the network?
I recommend two additional steps that are not listed in the linked document. The printing system of the Mac may need to be reset as it will clear any software that could be interfering (such as corrupted installations).
Follow the steps as outlined for 10.7 or 10.8 in this document from HP.
The next step is to install the driver package from Apple. This can be found here.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can connect to exchange using eM Client, but not Outlook 2013

Hi There,
I have been using eM client to connect to an exchange server with no problems for months. The reason I chose eM Client was because it was free (ha) and it could sync my email, calendar and contacts using Exchange Web Services (EWS).
But then I decided to make the plunge and get myself an Office account so I could use Outlook. The problem is I just can't connect. I have to use a address in eM client that ends with ews/exchange.asmx to connect, but for there is no option
to that in outlook.
Thanks for any help.
Mike
(Also, in case I am in the wrong place, I was referred here after I posted @ answers.microsoft.com)

Hi Mike,
Is there any update on this thread?
As Ed mentioned, have you checked the settings of outlook anywhere ?
In addition, you can refer to the following article to configure:
Configure Outlook Anywhere in Outlook 2013
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Can connect to local DB via SQLPlus but not via SQLDeveloper, all info incl

Have a database running on a new local Windows 7 Professional Machine with data, users, etc from an db import. Able to access database via sqlplus, run queries, etc. Cannot run from Oracle SQL Developer. Trying to use Connection Type Basic, Hostname localhost, port *1521*.
Using SID = xe I get:
Status: Failure -Test failed: Listener refused the connection with the following error: ORA-12518, TNS:listener could not hand off client connection The Connection descriptor used by the client was localhost:1521:xe
When I add a service in my listener.ora file for sid_name=xe and program_name=xe (which I include below), I get
ORA-12518, TNS:listener could not hand off client connection. The connection descriptor used by the client was localhost:1521:xe
Using Service name = xe I get:
Status: Failure -Test failed: Io exception: the Network Adapter could not establish the connection.
Here's every single piece of information I think you may possibly need to help me with the issue. [I've been trying to find the solution on these forums so I hope I haven't messed my settings up even more than they had been before.]
TNSNAMES.ORA (XE is the name of my local database):
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(service_name = XE)
(SERVER = DEDICATED)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
LISTENER.ORA
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = XE)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = XE)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
C:\Windows\system32>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 25 19:36:15 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
SQL> select sysdate from dual;
SYSDATE
25-APR-10
SQL> exit
Disconnected from Oracle Database 10g Express Edition Release 10.2.0.1.0 - Produ
ction
C:\Windows\system32>tnsping xe
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2
010 19:43:02
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = localhos
t)(PORT = 1521)) (CONNECT_DATA = (service_name = XE) (SERVER = DEDICATED)))
OK (20 msec)
C:\Windows\system32>lsnrctl services
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 19:46
:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "XE" has 1 instance(s).
Instance "XE", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:10
LOCAL SERVER
The command completed successfully
Edited by: user1966631 on Apr 25, 2010 4:59 PM

Got it. No, no virtualization. Just Win7 64-bit computer running XE.
C:\Users\Gil>sqlplus ccxreg/ccxreg@XE
SQL*Plus: Release 10.2.0.1.0 - Production on Sun Apr 25 21:23:20 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 19:54:10
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=760
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-APR-2010 19:55:46 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51031)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:11 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51040)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:18 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51043)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:31 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51048)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:34 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))(SERVICE_NAME=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51050)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 19:56:37 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=51052)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 20:42:45 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52547)) * establish * xe * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
25-APR-2010 20:43:08 * (CONNECT_DATA=(SID=@xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52558)) * establish * @xe * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
25-APR-2010 20:43:13 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))(SERVICE_NAME=@xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=52562)) * establish * @xe * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
25-APR-2010 21:03:00 * ping * 0
25-APR-2010 21:03:17 * ping * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 25-APR-2010 21:06:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=6836
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
25-APR-2010 21:06:11 * service_register * CLRExtProc * 0
25-APR-2010 21:06:11 * service_register * CLRExtProc * 0
25-APR-2010 21:06:11 * service_update * CLRExtProc * 0
25-APR-2010 21:07:04 * (CONNECT_DATA=(SID=xe)(CID=(PROGRAM=)(HOST=__jdbc__)(USER=null))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=53945)) * establish * xe * 12505
TNS-12505: TNS:listener does not currently know of SID given in connect descriptor
25-APR-2010 21:07:55 * service_update * CLRExtProc * 0
25-APR-2010 21:09:35 * service_update * CLRExtProc * 0
25-APR-2010 21:11:15 * service_update * CLRExtProc * 0
25-APR-2010 21:12:55 * service_update * CLRExtProc * 0
25-APR-2010 21:14:35 * service_update * CLRExtProc * 0
25-APR-2010 21:16:16 * service_update * CLRExtProc * 0
25-APR-2010 21:17:56 * service_update * CLRExtProc * 0
25-APR-2010 21:19:38 * service_update * CLRExtProc * 0
25-APR-2010 21:21:21 * service_update * CLRExtProc * 0
25-APR-2010 21:23:02 * service_update * CLRExtProc * 0
25-APR-2010 21:23:20 * (CONNECT_DATA=(service_name=XE)(SID=XE)(SERVER=DEDICATED)(CID=(PROGRAM=C:\oraclexe\app\oracle\product\10.2.0\server\bin\sqlplus.exe)(HOST=WIN7X64)(USER=Gil))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=54388)) * establish * XE * 12514
TNS-12514: TNS:listener does not currently know of service requested in connect descriptor
25-APR-2010 21:24:43 * service_update * CLRExtProc * 0

Can connect to Snow with MacBook Pro but not G4

I have used my G4 with the airport for a long time. I recently got a MacBook Pro and it connects in fine to the ABS. Both worked connecting to the ABS for a few months. Suddenly, the G4 quit recognizing the ABS. Nothing I do allows it to find it. Could there have been a software update that caused this? There was a thunder storm, but no recognizable issues on the G4, everything seems to be fine...except it doesn't see the Airport.
Thanks in advance for any ideas.
Larry
G4 Mac OS X (10.3.9)

try unplugging your broadband modem and ABS for a short time and plug them back in.

HT4061 Got new router my samsung galaxy will connect to my printer and eprint but Ipad won't connect keep saying connect to the same network this ipad connected before but now it won't

I had upgrade of new router my samsung galaxy can connect to my printer and eprint but my ipad won't it says connect to the same network my printer is hp deskjet 3550A printer my ipad connected to my last router

Hi Pvclayton,
If you are having issues with AirPrint on your iPad, you may find the following article helpful:
Apple Support: AirPrint Basics
http://support.apple.com/kb/HT4356
Regards,
- Brenden

Can video chat with Imac non-intel but not with Powerbooks

Hi,
I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
Is there anything else I can do?
Please help. Thanks.

Hi cmbell,
Do you know how to access your modem ?
This should give you somewhere to turn off DHCP.
Then you go to System Preferences > Network and select the connection method you are using.
Then select the TCP/IP tab.
In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
Type the IP you wish to use in the next entry field.
Copy the subnet mask form the Using DHCP
Copy any DNS servers listed.
Copy the router IP address which will be the modem or router in question.
Hit Apply.
Done.
9:23 PM Sunday; May 7, 2006
Message was edited by: Ralph Johns (UK)

A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1

A printer that I have connected to my iMac via usb in not showing up in printer options on my iPhone or iPad and it use to before I upgraded to 8.1. How can I fix this?

Is it an Airprint-compatible printer, and is its WiFi enabled if it is? (see: About AirPrint)
If it isn't an Airprint supported printer, then you need a 3rd party driver on your iMac to print from an iPhone. Such as Printopia. As it worked in the past you probably have such a printer driver installed; check and see if it's running.
Beyond that try restarting the printer, restarting the phone, restarting your router, and restarting your computer.

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooed it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

I just got a wireless printer and we followed the directions on how to hook it up to the iPad. Somehow it seems as if we hooked it up to the wrong printer. How do we disconnect this printer from the iPad so that we can connect the correct printer?

AirPrint finds any air print enabled printers on your wifi network, and won't find any printers that are not. So if you print from, say, safari, and it finds that printer, then that is your printer. It may have a different name than you were expecting.
Turn the printer off, and see if the print job still sees the printer. That will confirm that the one it sees is yours.
What happens when you send the print job?
If you are sharing a wifi network with others, and one of them has a AirPrint printer on the network, you will see that one. There is not way to have it forget one, so you will need to know your printer from the other printer, and select the right one.

I CAN PRINT HP PAGES--- BUT NOT ON LINE PAGES

I CAN PRINT HP PAGES BUT NOT ON LINE PAGES
ERROR HAS OCCURRED IN SCRIPT ON THIS PAGE
ERROR UNSPECIFIED

Please read this post then provide some details. What printer model? What operating system? How is the printer connected?
What browser are you using? Are you using HP Smart Printing or some similar program?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

I can connect my lexmark printer by usb but not wireless

Similar Messages

Maybe you are looking for