I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.
I can connect to internet with my MBP through Airport Extreme, but my iOS devices can't. Please help.
GerleMan, Welcome to the discussion area!
There are two probably causes:
Your ISP is blocking the port used by Entourage to send mail and the ISP used by the other wireless networks is not.
OR
Your ISP doesn't like OS X's default MTU seting of 1500. If this were the case it should also affect any large file transfers you try to make from your Mac to the Internet.
Similar Messages
-
Can't connect to internet via MacBook Pro to Airport Extreme
I can't connect to internet via MacBook Pro to Airport Extreme. I reset AE and modem (power down and back up again). Some computers on my home network will connect fine and others won't. The ones that won't don't populate the DNS server or the Search Domains. AE shows up on all the machines. I have one computer also connect to AE via ethernet and it has the same symptoms. Why do some Macs connect and others don't. Even when I get them to connect when I shutdown or put in sleep mode over night I lose the internet connection and have to start all over. Very frustrating.
Regrettably no replies. I have struggled with this for days with no success and I have given up on the Airport Extreme. I have found several other Forum posts with very similar problems and no one seems to have a solution to this. It seems other wireless routers work better than the Apple product. I was able to get my old Linksys wireless router reset and it is set up and working well. The Linksys router does populate the DNS servers and domains where as the AE does not. Apple engineers should look into this. If I am mistaken and there is a fix for this someone please let me know, otherwise my AE will probably appear on Ebay very soon.
-
you are running the latest version of iTunes, have no other USB devices attached, have no security software installed, and are directly connected to your ISP source, simply restarting the computer and the iOS device can clear up certain issues that could prevent you from restoring. After restarting the computer and iOS device, attempt to restore again.
How big is your library? I would recommend the following troubleshooting steps:
- Backup your library. Always a good idea before messing with things.
- Create a new library. Refer to this article for details: http://support.apple.com/kb/HT1589. This won't delete your old library, you're just creating a new empty one. Also refer to this article to get back to your old library later.
- Add a few albums into this new library. Not everything, just a small sampling, as a test.
- Activate Match on this new library. You shouldn't have to re-pay, it should just say "Add Computer" or similar.
- At this point, Match should run again. With just a few albums it should complete in just a few minutes.
If iTunes doesn't crash at this point, then likely there's something about your original library that Match doesn't like - what that is I don't know, but at least you'll know it's not your PC. If iTunes still crashes, then if could be a number of other things, but probably not your library. My next suggestion (if you haven't already done this) is to uninstall / reinstall iTunes. If that doesn't work, then my next ideas you won't like. -
How can I mirror my Macbook Pro desktop through Airport Extreme to a digital projector with only a DVI & VGA inputs?? Want to use it for presantation like Keynote/ Pages.
Never mind, I solved it. Didn't know the converter needed a power source to operate (duh!) Now I have that, it works just fine.......
-
How do I set up a wireless network with an AirPort Extreme base station and two airport extreme but between apple devices either by ethernet
This Apple support document provides good general information on configuring different types of neworks using multiple AirPort routers.
http://support.apple.com/kb/HT4145
In particular, you would want to focus on the information regarding a "Roaming Network" -
I tried to install adobe reader in my PC with Win 7 OS 32 bit but after opting run nothing happens, please help
installer
On Tue, Aug 19, 2014 at 12:21 AM, Pat Willener <[email protected]> -
IMac can not share internet with new MBP
I just purchased a 13" MBP(10.5.7)and wanted to update software, register, etc. I'm trying to share the internet from my G5 iMac(10.5.7). With airport turned on,I've turned on internet sharing from ethernet to airport on the imac but the Radar icon does not display the "arrow" to show that the iMac is acting like a base station. The firewall setting in the security pref. is set to allow all incoming connections. i keep trying different combinations of settings but the only change is a light gray "monitor" icon on the airport radar in the tool bar. ( and I can't seem to repeat that)The new MBP sees the iMac in the airport drop down menue but does not connect, it says it needs a password but none was established on the imac. When opening safari is says not connected to internet. I've read many post regarding sharing but I must admit I'm confused. I thought this was supposed to be simple.
Thanks for any responsesI have done those things. I tried the same with an older ibook and three clicks and the airport icon showed an arrow (signaling it now is a base station) no problem but not on either of the leopard machines. is there a problem with sharing using leopard?
When I set the imac to share the ethernet connection and choose by airport the red Button changes to green. the preference window says "sharing your ethernet connection" but no change at the icon on the upper right menu bar. (I've always thought it changes to an arrow over the "radar" icon) if I close the sharing window and then reopen it or turn the airport on/off the internet sharing box becomes unchecked and sharing is turned off. I can't seem to get the radar icon to change and the sharing settings to stay "set". -
Can't connect to internet through airport extreme but have full signal
I've seen a lot of posts but I still can't connect wirelessly via airport extreme.
Using a Powerbook running 10.6.4, I have updated the airport extreme's firmware and have a full signal strength, but I can't connect to the internet.
I get an error message that it can't find the server.
I can get online if I connect the internet cable directly to my computer.
so..
Airport is working
Internet is working
Wireless is not working
suggestions?Robin Berman wrote:
I still can't connect wirelessly via airport extreme.
Using a Powerbook running 10.6.4
That's not possible. Do you mean "MacBook"?
I ... have a full signal strength, but I can't connect to the internet.
First try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take a minute or so to try.
If that doesn't help, connect to your wireless network, then open the Network panel of System Preferences. Select the AirPort connection item, click on the "Advanced" button, then on the "TCP/IP" tab. What do you see for the three values below "Configure IPv4"? Now click on the "DNS" tab. What do you see for "DNS Servers"?
Finally, type this URL in the address bar of your browser:
http://74.125.157.99/
and press "return". Does that take you to Google? If so, there's something wrong with the way your computer or router is handling DNS lookups. -
Just changed modems, can connect via wifi to surf the net, but can't connect via wifi to update aps in iTunes store
OK thanks, I thought that maybe some of the iphone 3s were not able to connect to Wifi,
-
New AirPort Express, but only 1 device can be connected at a time
I recently switched out a Linksys router for an AirPort Express, and now I am only able to connect 1 of my devices (MacBook, iPad, iPod Touch, Tivo) to the internet at any given time. I'm not sure if this is an AirPort or ISP (Earthlink DSL) issue, but with the Linksys, I was always able to have multiple devices on my home network at once.
With each of my Apple devices, I have to open Safari and obtain a connection by entering my DSL password. Specifically, the Earthlink ASDL Modem page says, "The Internet connection is currently in use by another computer (lists the IP address). Enter your DSL Account logon password to switch the Internet connection to this computer."
After I do this, Earthlink gives me the option of 'Releasing the Connection' so other computers can access the internet without entering the logon password...whether I do or don't, it doesn't change the fact only 1 of my devices can be online at once.
Did I configure my AirPort incorrectly or is there a setting that I need to change to fix this issue? Thanks!Welcome to the discussions, kaytoem!
This sounds like you may have the AirPort Express set up in "bridge mode", which would only allow one device to connect at time.
Open AirPort Utility - Click Manual Setup
Click the Internet icon
Look for the Connection Sharing setting
This should be set to Share a public IP address
Update to save any changes
Does that help? -
Can I get my phone to work through airport extreme?
I Have NBN and I'm trying to find a way to use my cordless phone through my AirPort Extreme device. Any suggestions?
Sorry, but what is NBN? Would that be National Broadband Network in Australia?
What is your goal in using your cordless phone with your AirPort Extreme base station? Is it to configure it as an IP phone? Does it support this type of feature or does it rely on a standard POTS phone line connection?
If your goal is to set up an IP phone system at your home, you may want to consider another modem/router that has this as an offered service as the Apple routers do not. I would suggest that you contact your NBN provider to see what they offer/support. -
How I Can "chain" 2 HDD and share it through Airport Extreme?
The question is, I have an Iomega HDD 500 Gb and I want to buy another, but I want to share it through the Airport Extreme USB Share Port. The idea is to see it as a single volume (better) or as a two different HDD (worse). It's possible to chain this two HDD through firewire ports or the USB? It's possible to share more than one disk through the Airport Extreme?
ThanksOnly drives I been able to connect successfully and continues are OWC drives on the Airport extreme base thru usb port. I have two drive thru belkin hub connected to two 250GB from OWC drives. To back up large files take for ever. So I have changed or converted to NAS drives.
I hope this will help you? -
Please help me! I badly want to transfer my videos to my computer but it won't appear as an ipod nano but a usb device instead. So I can't see the DMIC folder. I only see 'Recordings', 'Recylcler', and other folders but I can't see the DMIC folder. And yes, I already enabled it to disk use, but it still won't appear. Please help.
What generation iPod Nano do you have? I assume the Enable Disk Use option is ticked from under the iPod's Summary tab in iTunes?
If it's a 5G Nano, have you seen this article to help walk you through the process of copying these recorded videos to your PC.
iPod nano (5th generation): How to copy your recorded videos to a PC
B-rock -
PLEASE ONLY RESPOND IF YOU KNOW HOW TO CORRECT THE PROBLEM. I'M CONNECTED TO MY LANDLORDS INTERNET VIA AN EXT NETGEAR ROUTER, PASSWORD PROTECTED, THAT HE HAS PROVIDED WITH A G3 IBOOK. FULL SINGAL, CAN'T OPEN WEB PAGES. HAS NEVER HAPPENED BEFORE.
That's because your landlord probably is using WPA2 encryption or 802.11g or 802.11n wireless. The iBook G3 lacks support for WPA2 encryption, which is much stronger than WEP and the original WPA. It also only has support for 802.11b. If you want to join a newer router with a secure firewall, get an 802.11g or better wireless ethernet bridge.
P.S. Please avoid from using all UPPERCASE. It is hard to read, and in internet etiquette it means you are attempting to shout and be rude. I'm sure that was not your intent. So please avoid from doing that again. Thank you.
P.P.S. 10.7.1 can't run on an iBook. Are you sure you have an iBook and 10.7.1 is on it? If it doesn't say iBook on your screen frame, or Apple menu -> About This Mac doesn't say Mac OS X 10.7.1, it is not 10.7.1, or an iBook. MacBooks, which replaced iBooks in 2006, and later came out with Core2Duo and Core i processors, are the only Apple notebooks that can run 10.7.1. -
when accessing my teacher email through firefox I can receive and open email but can't send any (the teacher email uses IBM Lotus Inotes
I am running Lotus iNotes version 8.5.2 on Firefox version 6.02. I am not seeing any errors in a red bar. I click "send" and nothing happens.
Maybe you are looking for
-
I am getting an object reference not found error when trying to view the version history of any list item within my web application, as well as view or edit any list item properties in general. Below is what the ULS log generates when I try to view
-
In the line where one types the web address or can do a search, it goes to the link pages, showing all of the links associated with my search. When I click on a link it shows error 404, not found. This started about two wks ago Thanks for any help u
-
Display a Word Document in the Output
Hi All , I would like to display a word document in the Output . I cheked the demo application 'ZIOS_TEST_SIMPLE_MS' , but i am not able to see the Word Document in the output. Do we need to do any settings or configuration to be done to use these co
-
Citrix NetScaler Management Pack Account
Hello, I read the documentation and noticed this: The Citrix NetScaler Management Pack requires log on credentials of the NetScaler systems it is managing to be able to take corrective actions when the virtual servers become unhealthy. I created the
-
Event ID 12072 The WSUS content directory is not accessible
Getting this error in wsus on 2012. I cannot download any updates. any idea? Log Name: Application Source: Windows Server Update Services Date: 7/1/2014 7:26:57 PM Event ID: 12072 Task Category: 9 Level: Error Keywo