I can connect to MAC but not my PC

I have a new Nano, that connects to Mac but not my PC. When I try to connect to PC it says "iTunes as detected a Macintosh formatted iPod. You must restore this iPod before you can use it on Windows."
How can I get my Nano to work on both?
Thanks!

Windows cannot read a Mac formatted disk.
You need to Restore on iTunes for Windows and it will then work on Mac & Windows.

Similar Messages

Can connect with Macs but not PCs - iChat 2.1 OSX 10.3.9

Hi, I am having problems connecting to PCs but can connect to other Macs fine. I have ploughed through as much of the correspondance on here as I can find but with no luck. Would I be right in assuming that if I can connect OK to another Mac (with .mac name or AIM name) my settings should be OK?
Cheers,
Mike

Hi Mike
Try me and see, defcom1 .mac account.
Has the PC side-up ok, see for set-up http://www.mvldesign.com/videoconferencetutorial.html#xp they must be using AIM5.9 and not AIM Triton
Tony

Changed to secure - can connect with mac but not pc running vista

I changed my wrt54gs from unsecured to secure by changing the wireless > wireless security > to security mode: WPA personal, the wpa algorithms is set to TKIP, i set up a password in the shared key area and the group key is set to 3600. I saved the changes and now i can connect with the password with a macbook pro as well as with a ipod touch but i cant connect with a laptop running windows vista. I would get an error saying unable to connect, funny thing is though i am connect (and it is the correct router, not a neighbors) but it says connected with limited access. I tried to run diagnostics and repair but to no avail. Any thoughts on what to door is limited access ok?
thanks,
Dave

Try this :
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer.

I have a problem to connect with FaceTime. I am using OS X 10.9.1 on a Mac PowerBook which is 4 weeks old. I can connect on iPhone but not from my computer. Does anyone have a similar problem???

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Can connect to appstore but not can't download songs or music albums

can connect to appstore but not can't download songs or music albums in mp3.

Sorry, but music tracks and other media contact are not available in Israel via an iTunes Store at this time. None of us here can say when Apple will be able to obtain the necessary licenses and feel it worthwhile to set up an iTunes Store for your country.
Regards.

I can connect to WiFi but not the internet

I am trying to connect a new IPad 2. I have a Belkin router that is B+G+N. I use WPA2 encryption and MAC filtering. The IPAD's MAC address was entered into the router and when I provide the encryption key as the password I am able to connect to WiFi but not anything Internet related except for email. When I type any URL in Safari it takes me to my router's management page. In fact I can log into my router and manage it from my IPad but I can't connect to anything else. I have 8 other computers/devices that connect to the router fine including two Apple Ipod touch's. This has me baffled.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can connect to skype but not internet, running snow leopard

Moved to new house; was able to connect to internet with firefox first day; after that can get on Skype but not internet. Is it my computer or the wireless router in the house? what should I do?

This is all I could find on the topic, but it doesn't resolve my issue:
http://docs.info.apple.com/article.html?artnum=106798
http://docs.info.apple.com/article.html?artnum=106797

Can connect over wlan, but not using ethernet cable between mac and extreme

Hi, I have a brand new Airport Extreme base station. Wireless LAN works well and both my wife's and my Mac can connect to the internet. When I connect the ethernet cable to my macbook, it does not connect to Extreme. Is this a feature or a required change in the setups?
br
Vesa

vesaw, Welcome to the discussion area!
On your MacBook, open System Preferences-> Network preference pane and ensure that Ethernet is enabled.

Find my iPhone can find my mac but not show the location

hello, i need some feed back. i am using find my iPhone to locate my devices and all is found but one problem, i see that my mac is shown to be online but location not found. how do i get the location to show because my other devices i can see on the map but my mac just shows up as a mac mini. am i doing something wrong?
Message was edited by: belto

Yes, your Mac needs to be connected to a Wi-Fi. See this help text: iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac http://support.apple.com/kb/TS4006
Find My Mac can only locate your Mac if it is connected to the Internet via a known Wi-Fi network. If your Mac is connected to the Internet only by an Ethernet cable, Find My Mac will not be able to locate your Mac.
Your iPad, iPod Touch, or Mac is asleep and not connected to a known Wi-Fi network. You will still be able to request an erase, send a message to display and lock your device, or request that a sound be played. The command will be processed when your device is awakened and connected to the Internet.

Can connect to network, but not to internet

I have a wireless network set up with four macs connecting to it. Three of the macs can connect to the network and access the internet.
My Black Macbook can connect to the network, but when I open Safari or any other program that connects to the internet I cannot actually get on the internet. For example, I open safari and after a few minutes it says I am not connected to the internet.
I can connect to my neighbor's unprotected wireless network and have no problem getting on the internet with that connection.
I have tried turning the computer off and on and turning the airport off and on and it does not solve anything. I did not do anything to the compueter, it just started this problem out of the blue.
Any ideas on how to fix this?

Do you have IP address limits ? Say I have 5 IP
addresses limit.
That is not it. And, I did not change anything before it just stopped working. The strange thing it is only within my wireless network that I can't access the internet. I eventually get the "you are not connected to the internet" screen each time I try to bring up a web page.

Can connect via Ethernet but not via AirPort

I'm having some problems using my AirPort in Germany. I can connect just fine using an Ethernet cable direct from the modem (NETGEAR DG632B) but when I have plug the Ethernet cable into the AirPort I can't connect. I beleive it has to do with PPoE settings, which I am not really familiar with.
There are three spots I can enter my account info. 1, on the modem itself via Safari; 2, on the AirPort via AirPort Admin Utility; 3, on the Mac via Network Preferences. I have input my PPoE username/password into the modem while directly connected. I would tend to think that this shoudl be it and that everywhere on the LAN side of the modem would be able to utilize that account. The NETGEAR settings page shows the ADSL port Network Type as PPPOE and the LAN port as DHCP, so I have attempted to set up my AirPort and Network prefs using DHCP. That leads to "You are not connected to the Internet. Safari can’t open the page “http://www.google.com/” because your computer isn’t connected to the Internet." Network Diagnostics shows green at AirPort, AirPort Settings, Network Settings and ISP. It initially shows yellow at Internet and Server which lead to "Failed" on both. Network Diagnostics then asks me to choose my network port configuration (Built-in Ethernet, Internal Modem, Airport,Other). I select AirPort and select my AirPort network. Then all the Status lights except for AirPort turn red and asks if I use a DSL or cable model. I select yes, it asks me to restart the device, I do, it asks if I can restart any other devices, I select no. At that point Network Diagnostics says it is unable to connect to the Internet.
I have down-graded to Airport Firmware v5.5.1 as some have advised. No change. I'm running MacOS 10.4.6
My AirPort is just fine as I can use it to set up a LAN with no problem. I even pulled out my old Graphite base station and tried it. Same thing.
I have tried putting my PPPoE account info into my AirPort, my Network prefs both individually and both at the same time. Nothing. Is there something that I'm missing?

You'll need to connect your modem to your AEBS WAN port, configure your AEBS with the Airport Admin Utility, setting up the PPOE to properly log into your modem connection.
You should set up your mac to us DHCP (not PPOE).
THis should allow you to use either the ethernet port or wireless from your AEBS.
I hope this helps!

Two Users can connect to apleu3test02 but not each other

Hello,
I have been trying to connect to with my wife whom is on a road runner cable modem behind a belkin wireless router. I am on a comcast cable modem behind a linksys wrt54gv4 router, however it is flashed with an open source firmware. Both of us can connect to the various test users out there but we have intermitent issues connecting with each other. I am guessing that this could be partially due to our maximum uploads being about 345kbps. I have not setup any port forwarding, triggering, or ther router adjustments yet. I figured if I can connect to the apple test users it should not be a problem. I am working on trying to test without my router but comcast will not let me mac grab a dhcp address. Any advice would be greatly appreciated.
Me = macbook pro 2ghz with 2gb ram 10.4.7
Wife = 1.67 g4 ibook with 512 mb ram 10.4.7

I'm having the exact same problem. My father and I were able to communicate for weeks with no issues and since updating to 10.4.7 we have a 90% failure rate with video chat. It worked once last night and once this morning otherwise its an error -8.
Now until recently we have never port forwarded anything except VNC and I can't see how we could use this method with iChat when we have numerous users here at home.
I think the most frustrating part is it works from time to time and I can find the reason why.

Can connect to wifi but not to Internet

I had the problem that iPad2 suddenly could connect to wifi, and to 3G for that matter, but got an error trying to acces the Internet (from Safari or mail).
Tried for hours all the advice foud here and other places, like resetting this and that.
I had a feeling that it was something blocking on the iPad, not a router problem - all other devices could connect to Internet.
The solution: I had disconnected Dropbox! - Connecting to Dropbox again solved all problems. Now it's even possible to disconnect to Dropbox without getting problems with Internet access.
The lesson learned from this: apps can hang up Internet-connection, though they are not even using it!

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Can connect to network but not internet. Please Help!!!!!!!!!

I have a Thinkpad T-60p and have encountered a serious problem; I am unable to connect to the internet. The Thinkpad will recognize and connect to wireless networks but when I go to actually open a webpage it does not open. I spent hours troubleshooting the problem to no avail. My other laptop connects to the internet fine, so I do not think it is an issue with my router or modem. I also went to my neighbors and I was unable to connect to the internet even though I could connect to his network; once again my second computer does not have a problem. I tried what I could in the Thinkvantage wireless software but I am not that familiar with it. When I use the test connection option it just reads, “unable to connect to internet” but I have a strong signal to my network. I then tried a wired connection directly to my cable modem and my neighbors; once again it showed that I have a connection, but still will not connect to the internet. I tried disabling my Firewall and Virus software and still could not connect. I have shutdown, unplugged and reset everything. I still receive the same results. I am not sure what has happened, I have not installed any new software or hardware recently. The computer has been working great up until this morning. I ran my virus software and a free online scan as well, nothing had been detected. I called tech support and they said it was a software issue to either pay $100 for help or post in the forum. The only other option I can think of is a complete systems restore, which I am trying to avoid. Anyone have any suggestions?
Please Help,
P.

ConnectDon wrote:
Perhaps the domain names are not resolving properly. Instead of http://lenovo.com, try http://64.26.254.19, which is the numerical address for lenovo.com. If you see the Lenovo home page, it will point us in the right direction.
Don
I will try that when I get home from work, thank you for the advice. However,I did notice that when it attempts to connect it shows the IP Address in the IE window bottom left corner. In the past it would always read connecting to "website name" but since the problem started it shows the IP address instead of the actual name.

Can connect to VPN but not Remote Desktop

I hope I've go this post on the right section.
My current OS is Snow Leopard and I've been trying to connect to my work computer. I'm able to successfully connect to our intranet via VPN using a Nortel client, bust I just can't seem to connect to my work compy.
I have downloaded Microsoft Remote Desktop Connection for Mac v 2.0.1 and it keeps telling me that it can't find my work computer. I also tried CoRD v0.5.2 and this can't find my work compy either.
I have a PC running Win XP, and this one can connect to my work compy no problem - so I know it's not my home network/router that's causing the problem. It's either something to do with my settings or the Remote Desktop clients that I have.
Can someone please help me?
=(

Are you trying to connect to your computer by its name or IP address? If you’re using its name, use the IP address. If you are using the computer you find the problem is your DNS is not able to resolve the name to IP.
Once you have connected to the company VPN, when you fire up remote desktop software use the IP address of the computer you want to connect to.

I can connect to MAC but not my PC

Similar Messages

Maybe you are looking for