I can dial out on my 4s & can answer calls, but no one can hear me talking? Tried network reset...anything else?

Please help...can dial out & answer calls, but no one can hear me...tried network reset...anything else?

Or you can call 1-800-My-Apple
Sounds like there's a hardware problem with your Mic and you need to get it repaired which can be done either at the store (which is going to get super busy very soon) or you can call into tech support for them to set up the repair for you

Similar Messages

  • What do you do when you can receive a call, but no one can hear you?

    What do you do when you can receive a call, but no one can hear you?

    From a Kappy  post
    The Three Best Alternatives for Security Questions and Rescue Mail
       1. Use Apple's Express Lane.
    Go to https://expresslane.apple.com ; click 'See all products and services' at the
    bottom of the page. In the next page click 'More Products and Services, then
    'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
    ID security questions' and click 'Continue'. Please be patient waiting for the return
    phone call. It will come in time depending on how heavily the servers are being hit.
    2.  Call Apple Support in your country: Customer Service: Contact Apple support.
    3.  Rescue email address and how to reset Apple ID security questions.
    A substitute for using the security questions is to use 2-step verification:
    Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

  • Phone can dial out but does not ring on incoming calls

    We have a strange problem with a 7961G phone. It's configured the same as all of our other phones in CMM, but it can dial out but when dialing in the phone does not ring nor does the call appear to be routed to the phone. I called out from the phone to my cell and it displays the correct Caller ID information. Any ideas???

    I would check the partition that the DN on the called phone is in and the CSS of the calling phone. These are the two fundamental principles that control when a phone can call another phone.
    You might want to change the partition of the called DN to momentarily, to see that the calling phone can call it. All phones can call the partition unless there are explicit blocks put in place.

  • HT201257 I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to

    I just bought an imac in september 2012.  And i just find out that my microphone is not working.  So i did an apple hardware test and with no problems found?  I have sound but no one can hear me, not even the computer.  Should i bring it back to the store

    Before you go through that trouble open About this Mac > More Info... > System Report > Audio and see if the system actually knows it has a microphone.  Then you can look into Applications > Utilities >  Audio MIDI Setup and see if the microphone is there, select it and make sure the sliders are set to full. Then in System Preferences look for Sound > Input and make sure it shows up there and the sliders are at least half way up. If none of that works do a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    It is the 5 second timing that initiates the reset.
    then go through the process of looking for the microphone again as the reset may reenable the mic.

  • Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

    Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

    Grum12 wrote:
    Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
    Hi Grum,
    If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
    Jerry

  • I have to upload files from pagemaker 6.5 but no one can open them.

    I have a lot of files (posters, brochures, etc) created in pagemaker 6.5. I try to send them to graphics services but no one can open them. They all want pdf files but acrobat will not convert the p6.5 documents. Any suggestions. Or is pagemaker out lived its usefulness and I should get another program.

    Everything you need is on the PM Setup CD.  However, PM6.5 is ten years so if you are using WinXP SP3, expect problems.
    There's some advice here, but it relates to PM7 and Win2K (which indicates it's no longer current).   ISTR that you cannot simply copy/extract Distiller because Adobe are very protective of it.
    Installing and Setting Up PM7's Export… Adobe PDF… using the “Application” CD-ROM
    and here: Install Distiller from the PM7 application CD

  • HT4628 My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected

    My airport seems not to be working anymore. I have internet but now I can't play music through Itunes remotely. Airport kept flashing amber. Now I have tried to reset it it only flashes briefly amber and then no more light and it seems disconnected?? Any help out there?

    Unfortunately the Netgear DG834N router is rubbish with Macbook Pro's. I've had a few netgear routers, which were all good with my mac, which is why I bought the 'N' series one as an upgrade to the 'G' version, but basically it crashes my Mac constantly. I get the fade up grey screen forcing my to hard power off my book. everything freezes. It plain just doesn't work. wireless 'N' is still just in draft form and the difference between the Netgear and Mac version on the macbook pro just clash. Netgear haven't updated the firmware on the router since last year, so hopefully the will soon, but I've just gone back to my old 'G' version, and stuck the DG834N on ebay. I tried all the configs, with and with out security and no luck, it always disconnected, froze and crashed.

  • Droid X receives and sends calls but neither party can hear

    My Droid X would receive and send calls but nether party can hear each other, however I can send dial tones on the line.  The receiving side can not send tones.  Resetting to factory is dramatic.  What can I do to fix this.  Thanks!

    Sounds like the software could be corrupt, how is hard reset dramatic?
    It is either hardware or software, you won't know until you eliminate one.

  • I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    I need to reset my security questions, but can I  message  support  by text and not call or if you can tell me how to reset my questions here that will be great and I don't have a rescue email.

    If you've forgotten the answers, you can't do that yourself. Click here, tell the iTunes Store staff that you can't call, and see what they say.
    (109704)

  • I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.

    I can't make or receive calls in my iPhone 5(just bought second hand and unlocked), but I am able to use 3G network. If I use the same SIM card in other phone it works fine. I have tried network resetting and restore.
    I bought this cheap from an unknown persons. I have checked it is not in blacklist. And unlocked by apple.

    Those are all carrier features, so contact your cell phone provider.

  • I can play music from my ipod on my computer but now i cant hear anything from headphones

    i can play music from my ipod on my computer but now i cant hear anything from headphones

    You can also redownload it by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box , as I can see on my classroom book and in many tutorial.any one can help please

    I m trying to import some picture from my iphoto library but element 12 don't show me the iphoto dialog box ,where i choose what i want to import,  as I can see on my classroom book and in many tutorial.any one can help please ? thanks

    I have the same problem... but the photo library is neither on my iPhone or my Computer!! Please help.. its taking too much space.

  • HT1222 I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

    I was trying to update my iOS to 7.1 but I can't, I have internet connection but if requires WiFi? before I can update my OS just using my phone internet but now I can't. Does OS 7.1 really require WiFi? Thanks!

    The iPhone requires wi-fi to update if you try to update over the air, since the phone needs to reboot, thus disconnecting itself. You can update via iTunes and the computer, but you would not be able to tether to the phone for the internet connection, since the phone would disconnect. So, you can either update via wi-fi and the phone, or you can update with a computer that has an internet connection other than the phone.

  • Can anyone give me step by step for calling FM from one SAP to another SAP

    can anyone give me step by step for calling FM from one SAP to another SAP
    points will be rewarded,
    thank you,
    Regards,
    Jagrut BharatKumar Shukla

    *& Report  RFC_FOR_CUSTOMER_LIST
    *& RFC to a Fn. module from another system which implements BAPI
    REPORT  rfc_for_customer_list.
    DATA:
      fl_status TYPE i.
    DATA:
      fs_message TYPE bapiret2.
    DATA:
      BEGIN OF fs_customers,
        id   TYPE s_customer,
        name TYPE s_custname,
      END OF fs_customers.
    DATA:
      t_customers LIKE
         STANDARD TABLE
               OF fs_customers.
    CALL FUNCTION 'Z_BAPI_GET_CUSTOMER_LIST' DESTINATION 'R3N'
      IMPORTING
        return = fs_message
      TABLES
        customerlist = t_customers.
    IF sy-subrc EQ 0.
      fl_status = 1.
      LOOP AT t_customers INTO fs_customers.
        WRITE:
          /10 fs_customers-id,
           30 fs_customers-name.
        AT LAST.
          WRITE:
            /,/5 'No of customers in R3N = ', sy-tabix.
        ENDAT.
      ENDLOOP.
    ELSE.
      MESSAGE 'RFC failed' TYPE 'S'.
      EXIT.
    ENDIF.
                           TOP-OF-PAGE EVENT                            *
    TOP-OF-PAGE.
      IF fl_status NE 0.
        WRITE:
          /12 'ID'   COLOR 6,
           32 'NAME' COLOR 6.
        SKIP.
      ENDIF.
    This is one small example...
    Regards,
    Pavan

  • My Iphone 4 will switch on but will not respond as screen frozen (can't slide to switch on or answer calls) I have tried holding for 15 secs to reboot but same problem???

    My iphone 4 will switch on and charge, but a lot of the time the screen is frozen (can't slide to switch on or answer calls) I have tried holding for 15secs to reboot but it doesn't clear the problem????

    When you say "holding" is it both the sleep switch and the home button until the Apple Logo comes up? If it isn't then I would recomend doing that. If not, turn the phone off and then (while holding the home button) plug it in to iTunes, this will send the phone into recovery mode and will need to be restored from there. Note* this process does have the possibility of losing data if it is not backed up on the computer!!!

Maybe you are looking for