I can get on the itunes page and click download itunes but now i cant figure out what to do next?, i can get on the itunes page and click download itunes but now i cant figure out what to do next?
i cant figure out to download itunes, all that shows up so far it the download now on the webpage, but then after that im lost.
after this you have to go were the file was downloaded to and then double click on it and itunes will walk you through the rest
Similar Messages
-
all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.
Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time? -
Ok, I have a Mac g4, os9. ..450 Processor. I Think I upgraded ram, can't remember. Maybe a 512 card. Added an 80 gig internal HD for music storage. Computer was solely used for protools LE 5. I knew I was kinda close on my memory for running the program after recording things with plug ins etc. It was beginning to get slow at startup. Anyway it's been a couple years since I used it. I got it set up yesterday and it wouldn't launch and kept giving me error code 10. So I replaced the battery and tried again. the small finder icon in middle of screen would then pop up and alternate with a "?". Then it would change to a pict of a hard drive disk and then a me alternating "?". It would still give me the error code if I clicked on anything. So I then held down the shift key to turn off extensions as it had mentionEd to do a couple times. Still would give me the error code on my home page. If I tried to get into my hd which is on desktop it would give me the message, but somehow it did open one occasion and I went into it and scrolled to disk verify and repair. Did it. Said things were fine. I then saved the results in a file which was then offered along with location. I chose desktop. Probably really bad idea in hind sight.. It did it, but now no matter if I turn extensions off, the home screen pops up but then goes blank. The hard drive icon along with the new folder, and my protools icon immediately dissapear. And it freezes. at one point a message did pop up saying finder could not start up because there is not enough memory available. I'm not a computer guy. Ive tried finding the guy who helped me set this thing up 10 years ago but to no avail. If I can be guided to somehow uncover some of the unneeded memory usage I would then learn how to more efficiently use it. How the heck do I even start. I can't get to a screen which shows what's eating my computers space to even start getting rid of unneeded stuff. Please help if you can. I have so much to loose if I can't get it to work. Btw...I no longer have the os9 disk. I think it was tossed 10 years ago or more. May not even have my original pro tools disks anymore. Uggh.
Ouch, tough spot, but offhand I'd say some memory may have gone bad, or maybe just needs re-seating after all this time.
Not much you can do, but try this anyway...
PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/ht1379
In fact, do 3 in a row, takes a bit of time. -
I purchased an ablum thru itunes on my phone and it says i purchased the songs on itunes but when i go on my music it says i have to repurchase all the songs how can i get the songs with out havin to pay again
Whether you can redownload music depends upon what country that you in. If you are using your computer's iTunes then does music show in the Purchased link under Quicklinks on the right-hand side of the iTunes store home page (on your phone you might be able to redownload media via the Purchased tab in the iTunes store app) ? If music shows there, but not that album, then check to see if it's hidden : http://support.apple.com/kb/HT4919
If you aren't in a country when you can redownload music and it's still on your phone then you should be able to copy it over from the phone via File > Devices > Transfer Purchases. -
I am running Windows 7 and have tried to install iCloud. No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account." How can I resolved this?
I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish -
I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?
After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others. -
what happened is that my internet connection was not good so i downloaded .ipsw file from a torrent but now i cannot get it to update my ipad because ios 5.0.1 is out i tried copying files to ipad updates in the itunes folder but it still asked me to download a 700mb software update
plz helpIf you downloaded the correct version for your iPad model (and the different models have different ipsw files), then you should be able to navigate to it in iTunes by pressing and holding the shift key on Windows (command key on Mac) when clicking the Check For Updates button.
Message was edited by: King_Penguin -
After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?
How is it not working? And how are you doing it? Drag the movie onto the iTunes icon on the Dock... what happens?
-
Having an intermittent issue where my iMac blanks out on me. On restarting I get several bands running down the screen with pixels jumping around within the bands, then the white screen of death and nothing... This happens intermittently and usually restarts OK. Happened again three days ago and wouldn't restart for two days (again the bands/pixels etc) but now operating fine? Any ideas whats wrong with my iMac and what the solution may be? Also gets very hot from time to time, particularly if I'm playing music/watching youtube/movies for extended periods. Mac is 3.5 years old, running OS X 10.6.8, processor 3.4 GHz i7 memory 8GB 1333 MHz DDR3
If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. Use 2nd link if not near an Apple Store or aren’t in the US.
Genius Bar Reservation US
Authorized Service Provider -
my daughters ipod currently reads"ipod is disabled, connect to itunes". i am currently connected to itunes, but im clueless as to what i need to do to get the ipod back to the normal screen that displays the main screen to be able to use the ipod properly. i have tried resetting the ipod by turning the system off and back on already, can anyone help me?!!
thanks
blonde mom in tennesseePlace the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?
Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao. -
Trying to re-install iTunes and the message "Apple mobile device failed to start. Verify that you have sufficient privileges to start system services." But I don't know what to do? Please can someone help, I'm not the most technologically advanced person.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
Hello everyone
I've recently messed up my Mac OS X Lion by deleting Aperture, but I need to get my data out of the computer. I've tried to repair it using DU, but it said I needed to backup all my data and reinstall the OS. How do I backup my data to an external drive?
And by the way, I've got an important project in Final Cut Pro X. Is there any way I can back it up (including fxs and positions of the clip) ?
Hope you guys can help me!You need to back up 2 folders, Final Cut Events and Final Cut Projects which by default are located on your Movies Folder. You can always check by clicking on a clip inside Fianl Cut X and selecting Show in Finder in the contextual menu for the selected clip.
-
When I want to create apple account for my new iphone5 with different apple id than this in billing and card details page I am stuck and get the message contact itune store support to complete this transaction. Need to know what to do as I can't creat apple id
The first step would probably be to contact iTunes support as you're being told to do.
-
What does it mean when you get a "The iTunes library file cannot be saved. There is not enought memory available." ? And what can I do to correct it?
Well, I installed the latest iTunes this AM, works perfectly. Although for some reason it did lock up after playing a song today.
Horror stories? That's a bit overly dramatic.
No, it isn't.
The issue you are experiencing is one that has occurred in multiple versions of iTunes, a simple search would have revealed this.
A simple search was conducted, no one seemed to have an answer. Do you always adopt such a haughty attitude? Or was I just lucky. -
Hi - clock in tool bar stuck, somebody in another post suggest bettertouchtool, but don't know what that is and can't get to magnifying glass next to clock, get the error-beachball. I'm a novice w/ Mac. Thx.
HI ..
Open a Finder window.
Select your user account on the left in the Sidebar. It has a small house icon.
Now open the Library folder then the Preferences folder.
Move the com.apple.systemuiserver.plist file from the Preferences folder to the Trash.
Restart your Mac.
edited by: cs
Maybe you are looking for
-
Why my iphone show in the screen like it's conected to iTunes when it's not?
I WAS ACTUALITZATION FOR THE WIFI PROBEMS AND WHHEN FINISH I CAN USE IT FOR THE PROBLEM
-
Fios quantum gateway router problem
Hello, when I connect my coaxial cable and power adaptor to my old verizon mi424wr router, the internet works fine. But when I connect my coxial cable and the power adapter that came with the fios quantum gateway router, the internet doesn't work. On
-
PL/SQL and EGO_ITEM_PUB question
I will try to make this simple. I am using an API and it has a datatype called EGO_ITEM_PUB.ITEM_TBL_TYPE It is essentially an object which has all of the fields for it's base table (which is MTL_SYSTEM_ITEMS_B). When using the API, I do something li
-
When I try to execute a client/server applet , unable to connect to the server (server is external, not in my subnet). Client applet throws the following error, Error message: Server port: 30000 MPStudent.ERROR: Can't open socket on rendezvous port 3
-
Hello I hate on my apple tv screensaver facebook photo now I can not remember how I did