I can hear a slight lose part when I tap the back top of the iPhone 3GS?
I have the iPhone 3GS, gave my wife my old 3G. when I tap with my finger on the top of the 3GS up above the apple logo on the back I hear a slight rattle (or what seems to sound like a lose part inside the unit).
When I do the same tap my wife 3G it sound solid with no slight rattle inside?
Is it possible the compass component inside the phone or a different accelerometer Apple may of used (like a mercury switch) that may has a slight rattle?
I know this may seem trivial, but now I find myself tapping my phone and pondering if I have a lose part. The phone works great otherwise???
Thanks
Check the Ring/Silent switch above the volume rocker switch. It could be loose.
Message was edited by: dmiannay
Similar Messages
-
I updated to 7.0 and now my ipod wont play in my car stero. I have reset, bought an itunes song and reset again but nothing is working. Pandora wont play. I can hear it very slightly in my speakers if I turn up the speakers but it is so faint. It plays thru its own speakers and my radio plays thru my speakers in my car so my its not my speakers.Help! Thank you!
Hi Novagurl2369!
I have an article for you that can provide some helpful troubleshooting steps to address your issue:
No sound through stereo headset1
Inspect the headset jack for debris and clean if necessary.
Connect the headset and make sure the connector is pushed in all the way.
Check the volume setting. Adjust the volume by pressing the volume up and down button on the left side of the iPhone.
If you are trying to listen to music and cannot hear any audio, make sure that the music on iPhone is not paused. Try squeezing the headset microphone to resume playback. Additionally, from the Home screen you can choose iPod > Now Playing, then tap Play.
Make sure the latest version of iTunes is installed on the computer that you are syncing the iPhone with (songs purchased from the iTunes Store using earlier versions of iTunes won't play).
Try another Apple headset (some third-party headsets require an adapter to be used with original iPhone).
Try a different song or video.
Check to see if the iPhone alert sounds or other iPhone sound effects exhibit the same audio issues.
Disconnect the headset from the iPhone and see if sound comes from the built-in speaker.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
When I try to, the person on the other side can't hear me, and all I can hear are noises. But when I use apps like Viber or Facetime, I can make calls just fine! What may be the problem?
Did you fix the problem? I have the same problem and it has been pain in the neck.
-
How can I create accurate decimal dimensions when creating a new document or using the art board in Illustrator CS6? When I type in a number with a decimal, it automatically rounds the number up.
For my part you are welcome, sdowers.
Unfortunately, the uncertainty arising from the rounding has been up several times here in this forum.
I just came to remember a warning that needs to be given:
The rounding of the representation of a numerical value may be harmless in itself, but if you use it for any operation that changes the value, such as multiplication or whatever, things will go wrong because the operation will be made on the basis of the rounded value instead of the true value. So, as in your first case in post #2, 39.625 rounded to 39.63 will become 79.26 instead of 79.25. -
Can apple determine the location of my stolen iphone when it was powered back on and the remote data erase was initiated?
What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5 -
My screen is frozen with a picure of a plug trying to connect to an iTunes icon. I can't reboot my phone or sign on to iTunes. When I callmy cell phone number the call goes straight to voice mail! What happened? How do I get rid of the screen on my iPhone? Help please.
Thanks for any advice.There are multiple reasons why the update failed, unless you can provide an error message/code that came up then nodbody will know.
Now your iPhone is in recovery mode and will now need to be connected to a computer with iTunes and restored to factory settings. This will install the update at the same time.
If you have a back up of the iPhone before the issue occurred then after the restore to fqactory settings you can restore the back up to the iPhone. If there was no back up then I'm sorry your data is gone. -
I have an iPhone 5 and when i lightly tap on the back top part of my phone it sounds like something is rattling inside. Only on the top part of the phone, not on the bottom. I am wondering if anyone knows what this may be and should i have it looked at?
Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.
-
hi, I've got itunes music card for my birthday and when I scratched the back to redeem the code everything gone, so no code, what can I do? I've been to tesco to customer service and they told to contact itunes support
These are user-to-user forums. If the page that you posted from doesn't help then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.
varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules -
Where can i find .trn file location when i successfully take the back up of the database?
I accidentally deleted some records in my table, then i followed the procedure based up on this blog:
"http://sqlbak.com/blog/recover-deleted-data-in-sql-server/"
here it saying to find the .trn file, So here i am unable to find the .trn file where the location file i can found.
Can some one help to find out of this issue.
Ramesh SHi,
Try this select to check backup history:
Select
r1.database_name,
r1.name,
(case r1.[type] when 'D' then 'Full database backup' when 'I' then 'Differential database' when 'L' then 'Transaction Log Backup' else r1.[type] end) as BackupType,
r3.physical_device_name,
r1.backup_start_date,
r1.backup_finish_date,
r1.backup_size,
r1.compressed_backup_size,
r2.is_compressed,
r1.server_name,
r1.first_lsn,
r1.last_lsn
from msdb.dbo.backupset r1
inner join [msdb].[dbo].[backupmediaset] r2
on r1.media_set_id = r2.media_set_id
inner join [msdb].[dbo].[backupmediafamily] r3
on r1.media_set_id = r3.media_set_id -
I bought the song say something and it tried to download and it's in my library and I can play it but it has that little cloud thing beside it and when I tap it, it says that the done can't be downloaded at this time. How can I get it to download? It's been like this for a couple weeks.
You can download it on your computer at no extra charge and then sync it to your ipod
-
We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??
hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport -
help me
My iPhone is in recovery mode and I do not see it on my laptop and on iTunes. Moreover, I can not turn it off and when I try it comes up all the time in the recovery mode.Hey Yan Heng,
Thanks for the question. It sounds like your iOS device is not recognized in iTunes for Windows, while in recovery mode. The following resource may help to resolve your issue. While you should run through each step, the specific information related to your symptom is outlined in Step 5 (If the device is not recognized while in Recovery Mode).
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thanks,
Matt M. -
okay. when i connected my iphone 5 to itunes it replaced all of the data from my old iphone 3gs (contacts, apps, notes, bookmarks,photos, music, everything you can possibly think of) with my new iphone 5's data. I am so frustrated with this. Why? and it did it by itself, i didnt touch anything, or clicked anything. please help me this is urgent! I am a businessman and need my contacts.
You're iPhone was probably set to automatically sync with your iTunes upon plugging it in. Best option is to restore from a backup, either on iCloud or your computer.
-
I can't sign in FaceTime and when i sign in, it's said: The Server Encountered An Error Processing Registration.Please Try Again Later... Plzz somebody help me!!
Hi,
As the Other threads suggests I would check the Date and Time settings on the Mac and compare that with the settings in the router.
Messages (and iChat before that) send Time stamped info to Login and to send IMs.
Obviously most people set their Macs to their Time Zone and nearest city/town.
What people sometimes forget is that their Router/Modem device(s) have to be set correctly as well.
EDIT
Also Add a Public DNS server to your System Preferences> Network > Advanced Button > DNS tab
A Google one such as 8.8.4.4 or 8.8.8.8 seem to work well for most people
10:15 PM Saturday; March 17, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously
Message was edited by: Ralph Johns (UK)
Maybe you are looking for
-
GL account with line items in line type 'S' document split?
Hi Experts, We found in PCP0 there are payroll documents which has GL account with with line items in line type 'S' document split. Unlike other line items with line type 'blank' these line items cannot be opened and display the wage type details. Ho
-
Saving compound graphics in structured documents OR how to create a link in a graphic
Hi all, Frame 9 structured. We need to make a graphic icon into a link. In nonstructured documents (we have a different product that is not in structure), we just create a text frame on top of the graphic in the anchored frame, and add a hypertext m
-
J'ai une caméra sony DCR-TR120 mais le câble fourni ne me permet pas de me connecter à la sortie USB de mon Mac. (avant, j'avais Windows, et ça allait sans problème) . Quel câble puis-je acheter afin de pouvoir continuer à créer mes films et dvd ? Me
-
This is an infuriating problem and wondered if it happens to other people too and if I am doing the right thing by turning the Mac off then on again.
-
hello, I have a class that does some work and ends up with a populated vector. I have another class that does some custom drawing. I want the drawing class to be notified when the vector is populated. I have considered propertychangelistener, observe