I can hear caller but he can't hear me except on hands free and speaker phone

I can hear caller but he can't hear me except on hands free and speaker phone, hoew to fix this problem

Hi Shirley,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Similar Messages

  • HT2188 I can hear caller but they can not hear me except when using speaker phone

    I can hear caller but they can not hear me except when using speaker phone

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • To me can't call, but I can safely all of the call. What is the problem?(the iPhone 4S), To me can't call, but I can safely all of the call. What is the problem?(the iPhone 4S)

    To me can`t call, but I can safely phone my friends. What is the problem?

    Ok, make sense now.
    What happens when your friends call you?
    does it go straight to voicemails?

  • Trouble with Skype. can't hear caller but I can see caller.

    Trouble with Skype.  Caller cannot hear me but I can hear caller.  Cannot hear voice on test call.  Can see caller.  MIcrophone is on  and volume turned up.

    Michele,
    I do not have Mavericks running on my older MacBook Pro. During the call, do you have the microphone icon on the Skype window enabled or disabled? Have done that before.
    My Skype preferences:
    Microphone: Built-in Microphone (Internal microphone)
        * Automatically adjust microphone settings is set
    Ringing and Speakers: Built-in Output (Internal Speakers)
    Camera: Built-in iSight.
    System Preferences > Sound
    Input tab: Internal Microphone
    Output tab: Internal Speakers

  • I can hear caller but they can not hear me

    I can hear caller but they cant hear me

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

  • I can make calls but receiver can't hear my voice

    I can make phone calls but receiver can't hear my voice

    Hi,
    I have the same problem as you have. I have my iPhone4 since a year now (more or less). Since like 2 months ago whenever I receive or make a call people can't hear me, but they tell me they hear me hanging up and then no sound from my side. Sometimes they can hear me for a while and then not. ¿did somebody found a solution for this?
    I have updated to iOs 7.0.4, disconnected bluetooth, wifi and internet. Uninstall Whatsapp but none of these seems to solve this problem.
    Thanks for any help.

  • Can't hear caller but he can hear me

    I have an iPhone 4.
    When I make a call I can't hear ringing or called party when handheld but they can hear me.
    I can hear fine on speaker or through headphones.
    Any ideas?

    This rectified itself after two days!! Must be a new feature from Apple to help you save on phone bills.

  • I can receive calls but I can't hear anything at all when I answer it.

    My phone rings but I cannot hear anything when I answer it.  I can also make a call but don't hear it ringing, or anything when it is answered.  Can anyone help please?

    Contact Apple or AT&T. You probably have an issue with the "cell radio" in the device. They most likely will replace it, so back it up before you take it in.
    Basic troubleshooting steps.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Using BT Smart Talk App on iPhone 4 - Can make call but receiver can't hear me

    Switched to BT and the BT Smart Talk App appealed, which I've downloaded onro my iPhone 4.
    Been through registration process with BT for Smart Talk App (after downloading IOS7.0) which went well.
    However I've tried to make several calls and no-one can hear me.
    The phones itself works perfectly in usual phone mode.
    I have, of course, tried to resolve this with BT but got nowhere.
    In fact I was given several possible reasons all of which I think they made up!
    They are now due to call me next week.
    I've heard of several strange solutions (one using a piece of cardboard being one!!) but I'm guessing I'm not the only one facing this challenge.

    Go to settings :privacy:microphone:  then turn on access to microphone ,that should cure your problem

  • Why can I only hear calls on my hands-free or speaker phone?

    Hello
    I have an issue. All alarms, ring tones and text alerts are heard perfectly yet I cannot receive calls or play my iPod through the speakers of my iPhone 4.
    If anyone could help it would be much appreciated. I have tried the 'jiggle headphones in and out of headphone jack' trick as well as restoring the phone. I have no idea what to try next and it would be ace if someone could come and save me.
    Cheers,
    Georgia

    This may sound stupid, but it happened to me. Are you sure you peeled the plastic covering the screen off? It comes with the plastic covering the speaker.

  • TS3406 magic jack is not working properly. I can call out and hear the person i have called, but they can't hear me.

    My Magic Jack is not working properly. I can make a call and the person I have called can hear me but I can't hear them. What can I do to fix this?

    if it play not sound at all then it's likely the hardware issue where the headset detector gets stuck
    like this the detector just is stuck in the opposite way
    https://discussions.apple.com/thread/1343532?start=315&tstart=0
    more
    iphone stuck in headphone mode

  • I connect my iphone5s to my 2015 Terrain using Bluetooth, when I make a call I can hear the caller but they can't hear me. Anyone else have this problem? How did you resolve it? Other phones connect and work perfectly.

    NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.

    Hello Sandylynn,
    After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
    People can't hear you during a phone
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • When making a phone I can hear the other caller but they can't hear me

    No one can hear me when i make I phone call but I can hear them ??? I've tried the voice memo and that seems to work fine !!! Has Any one got any ideas that could help me please ???

    you need to isolate wetyher or not its a hardware issue.
    make a voice memo. (if there is sound then, your bottom mic is fine.)
    Make a video (if there is sound then your speaker mic is fine.)
    if those dont work restore to factory settings and setu p as new, if the issue persists, setup replacement
    if you have sound, try resetting your network settings. (settings general>reset>reset network setting THIS WILL DELETE ANY SAVED WIFI PASSWORDS.)

  • When making a phone call on my iphone I can hear the person that i am calling but they can not hear me

    when making a phone call on my iphone,I can hear the person that I am calling but they can not hear my voice

    My first new iphone4 was received and installed complete.
    Nothing to hear when i was calling, only when I used loudspeaker.
    complete reset and reprogrammed Iphone, same result.
    Called Apple support and received a new Iphone4 next day.
    Updated and programmed.
    It works.
    2 weeks ago My son's iphone4, same problem, could only call with loudspeaker??
    Anyone an Idea.

  • I can hear the caller, but they can't hear me??  This is my second iphone and it's happened on both?

    Does anyone have any suggestions??? I can hear the caller, but they can't hear me!

    Here's the problem I faced.  I have a iPhone 4 with AT&T.  I have the latest iOS 5.0.1.  When on a voice call the other party was unable to hear my voice.  The other party couldn't hear me even if I used the white ear buds that came with the phone or even on speaker phone.  All other features of the phone worked.  I could even Facetime, record voice memos and use Voice Control.  So I knew it wasn't a hardware problem.  AT&T installed a new SIM card.  Apple had me reset everthing and even do a restore.  I even went to an Apple store and an Apple Genius couldn't figure out why only phone calls didn't work.  He ran a diagnostics on the phone and everything checked out.  His only option was to offer to sell me a replacement phone for $149, since mine was out of warranty.  So today I continued my search for an answer and came to this page (https://discussions.apple.com/message/16912532#16912532)  and noticed the little green checkmark under the "More like This" section for "Re: iOS 5 Bluetooth Bug".  So I thought to myself, if theres a connection on this page, maybe it is my problem.  It was worth a shot at least.  So I turned Bluetooth off on my phone and now the other party can again hear my voice again on phone calls.  All this and I resolved my own problem and didn't have to spend $149.  CRAZY!

Maybe you are looking for

  • Installation oracle database 10.2 on mac snow leopard server JAVA ERROR

    When I try install DB 10g in my Macbook Pro with Snow leopard show this error when I try the 'installer' : No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed. Preparing to launch Oracle Universal Installer

  • Replacement of Function module in ECC 6.0

    Hello All, The Function module 'NAMETAB_GET' is shown to be obsolete in ECC 6.0 . Please suggest which of the function modules among 'DDIF_FIELDINFO_GET'  and 'DDIF_NAMETAB_GET' can be used as a replacement for the same. Also ,it would be helpful if

  • Can NIDAQmx do multiple things in sequence ?

    Hello all, I'm learning NIDAQmx and I wonder if it's possible to program in a single task a complex set of events such as [Generate Analog Out signal from array during T1], [Wait T2], [Receive Analog In signal into array during T3], [generate callbac

  • Cl_gui_alv_grid onf4 event handler

    Has anyone got a nice, tight, example of an ONF4 event handler using CL_GUI_ALV_GRID that they'd be willing to share? I'm trying to figure out the example in BCALV_EDIT_08. But, it's very difficult to follow. If BCALV_EDIT_08 is indicative of how muc

  • Suddenly all my thumbnails got a white border. How do I change that?

    I have always used thumbnails of the different eBook covers I design, to see how they work in a small size. All the alias' of all the eBook I've designed is on my desktop, so I can compare them. Suddenly the new pictures I store either get no thumbna