I can hear the caller with my speaker on and thru headset but not w speaker off and normally.

I can hear when the speaker phone is on and w a headset but no one can hear me when I just talk into the phone. What is wrong?

It may be stuck in headphone mode. Try inserting and removing the headset plug several times. If that doesn't resolve it try a reset - hold HOME and SLEEP until an Apple logo appears (about 10 seconds). And if that fails connect it to your computer and restore it using iTunes.

Similar Messages

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

I can hear the caller, but they cannot hear me when I use the speaker function on my iPhone4. Are there any fixes?

Basic troubleshooting steps outlined in the user guide are restart, reset, restore from backup, restore as new device. Try each of these steps until your problem is solved. If these steps fail to solve your issue, then you'll need to bring your phone into Apple (or an authorized service provider in your area) for evaluation.

TS3718 Facetime: I can hear the caller but not see them. They can hear and see me. What could be the problem. I am using an I-Pad 2 updated with OS7.

When receiving a Facetime call, I can hear the caller but can not see them. They can hear and see me.

Unfortunately, the drive is pretty much restricted without hacking it. That is, you can't stream its content via standardized protocols like UPnP, SMB, FTP and the like. This makes you won't be able to access its content from any third-party apps otherwise capable of playing back AVI files from UPnP / SMB / FTP / WebDAV etc. sources.
While this is certainly not a recommendation (I can in no way be held responsible if anything goes wrong): you may want to consider extending the capabilities of the drive by installing the hack: http://www.hackseagatesatellite.com/wordpress/welcome/
It'll "open" the drive for third-party, AVI-capable multimedia apps like GoodPlayer, It's Playing etc. to directly play the files over the network.

I can hear the caller, but they can't hear me?? This is my second iphone and it's happened on both?

Does anyone have any suggestions??? I can hear the caller, but they can't hear me!

Here's the problem I faced. I have a iPhone 4 with AT&T. I have the latest iOS 5.0.1. When on a voice call the other party was unable to hear my voice. The other party couldn't hear me even if I used the white ear buds that came with the phone or even on speaker phone. All other features of the phone worked. I could even Facetime, record voice memos and use Voice Control. So I knew it wasn't a hardware problem. AT&T installed a new SIM card. Apple had me reset everthing and even do a restore. I even went to an Apple store and an Apple Genius couldn't figure out why only phone calls didn't work. He ran a diagnostics on the phone and everything checked out. His only option was to offer to sell me a replacement phone for $149, since mine was out of warranty. So today I continued my search for an answer and came to this page (https://discussions.apple.com/message/16912532#16912532) and noticed the little green checkmark under the "More like This" section for "Re: iOS 5 Bluetooth Bug". So I thought to myself, if theres a connection on this page, maybe it is my problem. It was worth a shot at least. So I turned Bluetooth off on my phone and now the other party can again hear my voice again on phone calls. All this and I resolved my own problem and didn't have to spend $149. CRAZY!

I have this problem as well. The screen is black . i can.t get it to respond.Power home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn'

The screen is black . i can.t get it to respond.Power + home soft reset didnt work. Itunes could detect any sync apps. I used my home phone to call my iphone and on my home phone i can hear the calling tone.But my iphone didn't ring/screen did not light up. Its a iphone 4. Any ideas how to fix this?

If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in, but after accepting the call we cannot connect. No voice, no video.

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect. No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection What's up?

I am curious if possibly the hotel has some sort of VOIP block on. Have you tried Skype? Did you talk to the hotel staff? My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue. He has had no problems from Istanbul but he is staying in a corporate apartment there. If you find an answer please post back. Thanks

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

I can convert almost things multiple times at the same time including CMYK to RGB (or sRGB), but not RGB to CMYK and not brighten/contrast. How?

If you want a relevant answer you may have to elaborate on what you actually mean. Posting screenshots might help, too.
In any case multiple conversions of an image are not advisable in general.

I connect my iphone5s to my 2015 Terrain using Bluetooth, when I make a call I can hear the caller but they can't hear me. Anyone else have this problem? How did you resolve it? Other phones connect and work perfectly.

NNeed help I connect my iPhone 5s to Bluetooth in my 2015 GMC Terrain. When I make a call i can hear them but they can't hear me. Anyone else have this issue? How did you resolve it. Other phones work fine, just not my phone.

Hello Sandylynn,
After reviewing your post, it sounds like you can connect the device with Bluetooth and make and receive calls but they dont hear you. I would recommend that you read this article, it may be able to help the issue.
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
People can't hear you during a phone
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT4623 when i get a call or make one I have to use the speaker phone.I hear nothing after the phone rings but when I hit the soeakerphone icon i can hear the caller but so does everyone else.

When I receive or make a phone call, I have to hit the speaker phone icon to hear the conversation and so does everyone else around me.
My phone was perfect until I updated to the newest version.
The person making the call can hear me, but I cant' hear them until I push the speakerphone.
Any resolve to this please and thankyou.

Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

IPhone 4: I can hear the caller but the caller can't hear me??

It happens after a second or two on the phone the caller can't hear me but I can hear them fine. And sometimes they can hear me but my voice warped or crackly? then when I try to ring them back they can't hear me at all. Anyone else with the same problem???

For me the problem occurs on outgoing calls.
The person I am calling can not hear me. I hang up and call again and they can hear me.
Issue occurs randomly approximately 1 out of every 4 calls.
I'm using an iphone 3GS with IOS 4.3.3 installed using Optus network (Australia).
When the issue occurs the person at the other end cannot hear anything no matter how loudly I yell into the microphone. I'm not accidentally putting the phone on mute because it is not indicated on the phone that I have and it does not matter whether I am using the microphone headset or not. I'm getting sick of having to apologise to my customers for my phone not working properly.
I tried replacing my iphone 3GS with another iphone 3GS, restored it from my backup and using my original SIM card. Problem still occurs.
Since replacing the iphone did not resolve the problem it must be related to IOS, SIM card or cell carrier.
Anyone else experiencing the same issue?

When using Skype on my Pavilion, I can hear the caller but they cannot hear me.

Skype support can't figure out why this is happening. It has to be an easy fix, but I'm lost.

Troubleshoot the Microphone:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01926155&cc=us&lc=en&dlc=en
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Nobody hears me when i make a call on the 4g but its okay on facetime..i can hear the caller okay! any ideas?

someone calls me..i hear them.. they do not hear me..facetime is fine...any ideas what could be wrong??

restart,restore,and reset all been done...and i meant iphone 4 ...4g will be available in the future! sometimes it works, then cuts off...so could it be a faulty microphone?

I can open e-mails with a picture attachement on my MAC, but not on my iPAD

I Can open my AOL e-mails with picture attachments on my MAC, But they will on open on my iPad2. I get a message that says, mixed media and cannot open. Is there some setting I need to change on the iPad2?

What format are the photos in? Are they jpeg format? They should open if they are, but the message "mixed media" makes me question what the format is.

Ideal way to report on Nested Groups and their Members - I can get the script to work if there's one group, but not if there is two or more

Hi All,
I like to keep track of Groups and Users added into our Domain Admins. Yes, it should always be minimal, but if I can have a daily report just to be certain, I'll sleep better.
The following works just fine if there is a single nested group. I cannot get it to work properly if there is more than one. I'm hoping you'll see what I'm missing.
Works fine:
$admins = get-adgroupmember "domain admins"
foreach($i in $admins){if($i.objectClass -eq "group"){ get-adgroupmember $i.samaccountname |foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($i.name)}} | select username,group | export-csv c:\Users_and_Groups.csv -Notypeinformation}}
Does not work well. Result is that the "Group" information doesn't change to the correct group:
$myCol=@()
foreach($admin in $admins){if($admin.objectClass -eq "group"){$myCol+=$admin.samaccountname}{foreach($i in $myCol){get-adgroupmember $i | foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($admin.name)}} | select username,group
| export-csv c:\Users_and_Groups.csv -Notypeinformation}}}
Here is what I have in $myCol:
PS C:\Users\Administrator> $myCol
MarketingPSO
RMSysAdmins
I tried shortening up the one-liner a bit more, but for some reason the "RMSysAdmins" is the only Group listed even though Leia and Han are in the MarketingPSO Group:
foreach($i in $myCol){get-adgroupmember $i | foreach {New-Object PSObject -Property @{ username = $_.name;Group = $($admin.name)}} | select username,group }
username
Group
Leia Organa
RMSysAdmins
Han Solo
RMSysAdmins
c3po
RMSysAdmins
Darth Vader
RMSysAdmins
Boba Fett
RMSysAdmins
Thank you very much for your time,
Mr Mister

Hi Mr Mister,
To get nested group members, this script is for your reference:
function Get-ADNestedGroupMembers {
[cmdletbinding()]
param ( [String] $Group )
Import-Module ActiveDirectory
$Members = Get-ADGroupMember -Identity $Group|sort-object objectClass -descending
$members | % {
if($_.ObjectClass -eq "group") {
Get-ADNestedGroupMembers -Group $_.samaccountname
} else {
New-Object PSObject -Property @{ username = $_.name;Group = $Group }}
Get-ADNestedGroupMembers "groupname"
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

When I'm on Facebook and play Fish World, sending gifts is no longer working, the drop down box won't open enough to see the "send" button. It works in other games, but not in Fish World, and I contacted Fish World who said it was a browser problem.

starting yesterday I cannot get the drop down box to open to send gifts to my friends. Fish world told me a few weeks ago it was due to some updates with Facebook, but now that has been fixed and I can't get the game inFB to work. It works with other browsers - Chrome and IE9. Is there something I need to do on my end to fix this? Other facebook games work fine with drop down boxes, it's only fish world.

problem solved

I can hear the caller with my speaker on and thru headset but not w speaker off and normally.

Similar Messages

Maybe you are looking for