I can live with iphone 4 antenna problem but not with proximity sensor...

I did not face much trouble with antenna issue.. may be I am having good signal.. but certainly I am facing proximity sensor issue.. out of every 5 calls I have problem with at least 2 to 3 calls going to mute or starting facetime or opening address book etc...

I feel 100% the same. I am wondering if all these people complaint of the signal strength issue are really actually experiencing the proximity problem and just don't know it. This is beyond annoying.

Similar Messages

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD?

I keep getting kicked off of my wifi with my MacBook Pro but not with my IPAD, what do I do?

Hi, mmayers.
Sometimes a simple power cycle of the router can correct the issue that you are experiencing. However, the issue could be a little more complex. Wi-Fi routers need adjustments to settings periodically for optimized performance with the constant progression of wireless device technology. Below, I have included two articles. The first article will cover basic Wi-Fi troubleshooting. The second article covers the recommended settings for current Wi-Fi access points.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Cheers,
Jason H.

Windows XP - ok with 4.6.21 but not with 4.7.25 (getting_started example)

I'm new to this.
I have installled BD 4.7.25 and 4.6.21 from the msi onto my Windows XP (SP3) m/c
When I compile the simple examples 'getting_started_examples' they
work with 4.6.21 but not with 4.7.25
The error happens in 4.7.25 when the dbp->open() is called:
/* Now open the database */
ret = dbp->open(dbp, /* Pointer to the database */
          NULL, /* Txn pointer */
          file_name, /* File name */
          NULL, /* Logical db name */
          DB_BTREE, /* Database type (using btree) */
          open_flags, /* Open flags */
          0); /* File mode. Using defaults */
The error message is:
illegal flag specified to DB_ENV->set_encrypt
Any suggestions why this is happening?
I am using lcc-win32 as the C compiler.
Regards
David

Hi,
You need to make sure you are using the dll of db4.7 rather than db4.6. Rebuild db4.7 dll and the example program, and make sure the db4.7 dll is used rather than that of db4.6.

I can use iMessage with all iPhone uses except for ONE person. That person can use iMessage with all other users, but not with ME. What's the problem???

I can use iMessage with all other iPhone users that I communicate with, except for ONE person. When I send to that person, it always goes through as a text message. This person can use iMessage with pther people, but when they send me a message, it always goes as a text. Why can we both communicate with other people using iMessage, but not with one another?

Hi Russell,
1) If you have OD set up and "editor" has UID 1111, then when they log in to any machine that's bound to OD as editor, they will get UID 1111. Therefore, there won't be any of these permission errors. This is typically the recommended approach.
2) I assume you mean "You'd prefer to not using open directory?" Whatever the case, OD isn't mandatory with Xsan -- it's just that with multiple user accounts, managing them centrally tends to be easier. For 3 or 4 accounts and 3 or 4 machines maybe it's no big deal. If you go larger, it could get a lot more complicated. That said, if you set it up such that each machine has the exact same set of users (as you said, Mary = UID 502, Fred = UID 503, William = UID 504), then you can do what you want. Mary can log in from multiple machines at the same time, and in general you won't have permissions problems. Of course, if you try and read and write the same file from multiple workstations at the same time, you will get file locking issues, which will prohibit somebody from successfully writing the file.
File locking issues are different from general permissions errors. The former basically says "hey, someone else is editing this file. Therefore I won't let you edit it right now... you can read it if you want though." Permissions means somebody saves it, and Xsan thinks you saved it and own the file, when you really don't.
Quad-Core PMG5, 4 GB RAM, 7800 GT, 1 TB disk. Mac OS X (10.4.4)

Wireless video link example works with antenna only but not with SMA to SMA cable

I am trying to run wireless video link example https://decibel.ni.com/content/docs/DOC-22728 . It works fine if I use install antennas on my Tx and Rx USRPs. But it does not work if I use SMA to SMA cable to connect Tx and Rx USRPs. Can somebody guide me what is the reason why it is only workng with antennas but not with SMA to SMA cable.
Thanks
JK

I connect the 30 dB attenuator at RF input port of Rx USRP. But it does not work completely.
Without connecting attenuator i was not able to receive any thing on my Rx VI although it shows waveform. But after connecting attenuator receiver some times receive text messages and some times not. Also it does not work at all for images and for video it works partially but gives some error related to memory full after few mins.
I want to know why this example works completely without any problem if I use antennas, and why it does not work perfectly if i use sma to sma cable for connecting transmit and receive usrps.
Please guide
Thanks
JK

Can video chat with Imac non-intel but not with Powerbooks

Hi,
I have a Linksys WRT54G firmware v. 1.0.6 connected to a Comcast Cable modem. My IMac Intel Duo (OS 10.4.6) is connected via ethernet cable to the router. I am set to DHCP on router and IMac. My Quicktime settings is at 1.5mb, I have tried with firewall off and on with the appropriate ports open. I have tried upnp on and off.
I can connect to other Imacs (non-intel) but not to powerbook G4's. With the Powerbooks I can text chat, but sometimes they can see my text, but I can't see theirs. And every video chat is a fail to respond with the powerbook, but they can connect with others.
Is there anything else I can do?
Please help. Thanks.

Hi cmbell,
Do you know how to access your modem ?
This should give you somewhere to turn off DHCP.
Then you go to System Preferences > Network and select the connection method you are using.
Then select the TCP/IP tab.
In the drop down that says Using DHCP change it to Manually. (or Manual with DHCP if doing James' way)
Type the IP you wish to use in the next entry field.
Copy the subnet mask form the Using DHCP
Copy any DNS servers listed.
Copy the router IP address which will be the modem or router in question.
Hit Apply.
Done.
9:23 PM Sunday; May 7, 2006
Message was edited by: Ralph Johns (UK)

HT1386 I can see my iPhone in windows but not in iTunes

I can see my iPhone in windows and able to import pics but it won't appear in iTunes. It was syncing before and I have no idea why it won't now.

Hi there Allansky,
You may find the information in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

4s Hotspot tethering only works with USB and BT but not with wifi

Hi,
XP sp3 - iPhone 4s with ios 5.0.1 - on Three one plan
Tethering with wifi works to a friends Samsung phone, wifi on the pc confirmed working with the apple store wifi, tethering with USB and BT works with good connection speeds on my laptop but when i try to tether with wifi it connects to the laptop at 54mbps and all appears well, even claims to have received a small amount of data packets, but no data comes to any browser. The iPhone reports 1 connection to the hotspot and stays connected with a non-pulsing blue bar after the first minute.
In the PC i have tried this http://windows.microsoft.com/en-US/windows7/Change-the-order-of-network-protocol -bindings
I've deleted my firewall (zone alarm) completely and turned off windows firewall to go naked surfing for a second even though they don't cause a problem with USB tethering, makes no difference
I've deleted the network connection numerous times
"repaired" connection
dissabled and enabled the wifi
turned off the wireless with a hardware switch and on again
disabled bluetooth
rebooted many times
reinstalled itunes (latest)
loads more things i can't remember
This is causing me a nightmare. I've been through everything i can find online, been to the Apple store genius bar (genius appeared to have sub zero knowledge / interest as it involved a MS machine), been to a Three shop (legally not allowed to touch my PC apparently) and been to a Sony shop (laptop make, not their fault if my iphone doesn't work). All very frustrating.
Please help if you can! Any suggestion will be tried unless it involves sledge hammers or lakes, and only then for a few more days at most.

Turned off bluetooth on phone, turned off hotspot and on again, phone asked if i wanted to turn on bluetooth or go with USB and wifi only, said usb/wifi only. Still nothing. Rebooted PC and iphone. Turned on hotspot, pc seemlessly connects to network, still no data comes.
One odd thing is zone alarm asks me to "select a security zone for the wireless network at ip address: *******.0" every time and doesn't seem to remember the setting over sessions. When i get the status of the connection the ip address is *****.2 and default gateway is same ********.1 Not sure if that's anything.
Also getting a javascript error about an undefinded component (trustcheckermozilla) since i updated zonealarm but as i said even completely uninstalling zonealarm made no difference. I'll update firefox as well but tried with IE and still no data.

Class loading works with jre1.3.1 but not with jre1.4.0

Hello,
My JWS application use the following line to create an XMLReader:
XMLReader rdr = XMLReaderFactory.createXMLReader( "org.apache.xerces.parsers.SAXParser" );
Everything works fine with jre1.3.1, but with jre1.4.0 or jre1.4.1 I experience a very strange behaviour:
1) When my application is downloaded and executed for the first time, everthing works fine.
2) When I quit the application and I launch it again, an Exception is thrown (the system in unable to load the Class org.apache.xerces.parsers.SAXParser).
3) If I tell JWS to show the console, everthing works fine again. If I tell JWS not to show the console, the Class can't be loaded anymore.
Any idea ?

Hi.
I have also been experiencing problems in using Java Web Start for my application. When i tried certain functions of my application like saving and updating, I will faced this problem:
javax.xml.soap.SOAPException: Unable to create SOAP connection factory: Provider com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnectionFactory not found
In the previous email in the forum, it was said that this problem was overcame, but I do not really know to how apply the solution given below:
/* The following code is not used for now because
* the code in createXMLReader() which dynamically
* allocates the class does not work the with
* Web Start class loader.
* This can be used again once Sun starts shipping
* Xerces 2.x with the JRE. They have already changed
* the XML development pack to use Xerces 2.x instead
* of Crimson, but as of 1.4.1, they are not updating
* the JRE distribution.
//String className = System.getProperty("org.xml.sax.parser");
//if (className == null) className = "org.apache.xerces.parsers.SAXParser";
//try {
//     tParser = XMLReaderFactory.createXMLReader(className);
//} catch (SAXException e) {
//     tParser = XMLReaderFactory.createXMLReader();
XMLReader tParser = new org.apache.xerces.parsers.SAXParser()
Can anyone enlighten me on how to overcome the SOAP Factory problem? Thank you.

External Monitor - Works with Mac Lion OS, but not with Boot Camp

Computer: Macbook Pro 13 inch purchased Spring 2011
OS: Mac - Lion (10.7.3), Boot Camp - Windows 7 (64 bit)
Utilizing an adaptor, I'm able to use my Samsung monitor without I problem when working in the Mac operating system. Unfortunatlely, when I switch to Windows 7 / Boot Camp partition, plugging in the Samsung makes both the external and laptop monitors go blank.
I have spent hours researching this, but I have be unable to come up with solution. It seems like the problem might have something to do with the NVIDIA drivers.
Does anyone know how I can go about fixing this problem? I appreciate your help.
Thanks,
PJL

I haven't experienced this in Bootcamp under Windows 7 using your same computer/OS's and I dual boot and use two monitors daily. So what you want IS possible.
When you boot into Windows the only Apple software you are using are Apple supplied drivers, some third party. Your video drivers are supplied by NVIDIA to Apple.
Try different adapters and cables. You don't say what you are using, DVI, VGA, but prove your cable set first. Then get your hardware specs and driver specs from Windows properties in Bootcamp and hit the Windows forums.

Left most usb port works with usb 3 devices but not with usb 2 devices

Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

Can someone enlighten me on this issue? I have a MBP mid 12 that seems to have issues with usb 2 devices such iPods, HHDs, etc. The same port works fine with usb 3 devices. I have tried several solutions but not avail such as resetting the SMC, PROM, disconnecting the battery and reinstalling OS X from scratch. Is there anything Im missing? I still don't believe is a hardware issue but something wrong in the firmware...

How to open .snp files with Microsoft Office 2007 installed? It works with MS Office 2003 but not with MS Office 2007!

I have MS Office Pro Plus 2007 installed on my computer. I also have MS Office 2003 installed on another computer. Snapshot viewer is installed on both. My work snapshot files works with MS Office Access 2003 but not recognized by MS Office Access 2007. It would not allow me to save them either! Is it a problem with FireFox (3.6.8)? However, I do not have problem opening them up using IE7/8 on both computers. Any ideas? Thanks.

Are you clicking a download link from an email message on an OWA or webmail site? Do you get the open/save dialog for the .snp files? In that case, you should be able to associate them with the Snapshot viewer. If Firefox does not remember this and you have to do it each time, it usually indicates that the server is not sending a specific content type, just the generic "this is some binary content" content type.

Cs4 work with 10.10.1 but not with 10.10.2

CS4works sith 10.10.1 but won't with 10.10.2. Any ideas?

As CS4 is not supported anymore you will have to upgrade to a later version.
Even if it was running on 10.1 I would not recommend to go back, as it was also an unsupported OS and it is not guaranteed that it would always work and you would have to live with bugs which have been repaired with 10.2 from Apple.

PDF opens and works correctly with Windows 8 Reader, but not with Adobe Reader. Why?

Hi,
My sister-in-law has this PDF order form from one of her company's distributors that opens and allows editing of specific fields.
The only application that opens the file correctly (visually and functionally) is the Windows 8 Reader. If I open the file in Adobe Reader or with the Mac viewer things do not line up, fonts are too large, and when editing fields sometimes symbols show up and sometimes way over-sized numbers show up.
This behavior has been observed on both a Windows 8.1 PC as well as on a Mac Book Air.
Can someone please tell me why this is happening? Is there something that needs to be configured differently?
Thanks,
Matt

This is what I see when I open that PDF in Adobe Reader 11.0.07:
Can you tell me which parts are not correct? Obviously the Submit button is a bit strange.

TS4036 I cant access my Itune store from my PC. I have entered my ID but still can't access the store. I have tried removing it and re-installing it but to no avail. I can access the Itunes store with Iphone and Ipad but not my PC.

I can't access my itune store through my PC. I have tried removing and reinstalling Itunes,but to no avail. I also tried accessing trough I cloud on my pc but it say apple ID not correct but my Apple ID works on all my other devices such as Iphone 4s and Ipad 2. If I go to Icloud.com I can access my account but can't get to Itune store.
Help
Thanks
Dan

The apps I currently have are for the i phone and i pad but i would like to see this on this computer
On the Mac Air launch iTunes. Then connect either the iPad or iPhone.
Select the iPad or iPhone under Devices left side of the iTunes window in the source list.
Then select Apps from the menu on the right.
If you don't see the apps listed there, from your iTunes menu bar (top of your screen), click Store > Authorize This Computer.
See if that makes a difference...

I can live with iphone 4 antenna problem but not with proximity sensor...

Similar Messages

Maybe you are looking for