I can log in to Adminstration but cannot log in to Contract management

Hi all
Sorry for bad English
I installed CM 13 as stand alone and I downloaded Jboss 5.0.1 GA
I can log in to Administartion page by using expadmin/expadmin
I can not log in to CM page using admin/admin
the error :
" Could not open the group CMDEMO "
I can not use admincm.cmd on utility
Omda
My OS : windows 7

I can still access my Comcast email from the comcast.net website by signing in and going through the standard steps. The site has actually been optimized for mobile devices, so the email part of the website looks different now, but I can confirm that it does in fact work fine.
What is happening when you access the site. Can you sign in? If you can sign in, what happens when you tap on email on the left side?
I Agree with Bamatuscaloosa about the Xfinity Connect app. It was just upgraded and it is so much better to use than the webmail on the Comcast site. You should download it and give it a try.

Similar Messages

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..

I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

Can encode form Premiere directly, but cannot encode in Media Encoder from Premiere Pro

I can encode form Premiere directly, but cannot encode in Media Encoder from Prem.

We need to know a lot more to help you.
Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

I can open my web page, but cannot install itunes.

Everytime I try to install itunes, i get message saying check internet connection.
I can open my web page, but cannot update or install itunes.

These issues are usually caused by firewalls. See [[Cannot connect after upgrading Firefox]]

TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

CAN ACCOUNT FOR AN INVOICE BUT CANNOT PAY - PAY IN FULL GREYED OUT

제품 : FIN_AP
작성날짜 : 2003-09-16
CAN ACCOUNT FOR AN INVOICE BUT CANNOT PAY - PAY IN FULL GREYED OUT
====================================================================
Problem Description
환경 : Oracle Payables 11.5.8
Module : APXINWKB - Invoice Workbench
문제 : AP invoice입력 화면에 있는 Action 버튼을 눌렀을때, "Pay In Full"
Option이 회색이어서, Payment작업을 할 수 없다.
(Payment화면에서도 해당 invoice가 나타나지 않음)
재현방법 :
1.Invoice Approval를 Enable
(Navigate as belows Setup--->Payables
Option/Invoice Tab/check the Require Invoice Approval checkbox
2.Invoice를 생성 (USD 100)
3.Invoice를 Validate
4.Action버튼을 눌렀을때, "Create Accounting"과 "Pay in full"
button이 회색으로 disable되었음을 확인
5.Invoice Approval를 Disable
(Navigate as belows Setup--->Payables
Option/Invoice Tab/uncheck the Require Invoice Approval checkbox)
6.다시 입력된 invoice를 조회하여 Action버튼을 눌렀을때,
"Create Accounting"은 Enable되었으나, "Pay in full"은 여전히
Disable되어 invoice를 Pay할 수 없음을 확인.
원인 : 이 invoice는 Approval workflow에 의해 처리 되도록 Process되었다. 그렇기 때문에, Workflow상의 Approval이 이루어져야 완벽한 승인으로
인식하기 때문에, 그 후에야나 Payment작업을 할 수 있게 된다.
AME (Approvals Management)를 disable하기 전에, AP Approval Process상에
또 다른 Invoice가 승인대기중인 것은 없는지 확인한다.
Workaround
아래의 update sql문은 검증되지 않은 것으로
Oracle Support에게 먼저 연락한다.
update ap_invoices_all
set wfapproval_status = 'NOT REQUIRED'
where invoice_id = &invoice_id;
Reference Documents
Note : 241404.1

I'll steal my answer from this topic from a prior post.
It's useful to know which versions of the software you are working with. I will assume you are on the latest release.
If you are using a separate web server and application server and are not using Apache as the web server you need to deploy pieces of the Financial Management system. Please read page 52 of the following installation manual: http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_manual_deployment.pdf
You can also deploy the HFM Web components directly to the Workspace server which may be a bit easier to setup.
Once you have picked the chosen direction and made changes to HFM you will then need to re-deploy Workspace App Server and Web Configuration.
Regards,
-John

I can import music to itunes but cannot sycn to ipod

I can import files to itunes, but cannot sync to my ipod classic?

glutius
My problem exactly, for over a year. I now have new songs on my updated iTunes but stilll have my old (but different) songs on my 2008 Classic iPod that I don't want to lose.
I just read that the latest iTunes update may have solved this problem. Is this true?!? I've been dealing with this problem for such a long time now, I'm afraid of even trying to re-sync without more information.
Does anyone have the latest info on this?
Glutius, I'd like to know if/how you solved this issue and I wonder if anyone has found Wondershare or Emicsoft to be helpful? Help

I can open my hotmail email but cannot reply or send new messages. this just started last week.

I can open my hotmail email but cannot reply or send new messages. this just started last week. Don't know why not. Is this a Firefox issue or a Microsoft issue? 'Cause it's near impossible to get Microsoft to get back to me. Hope you can help me.

I resolved both my problems. The problems with Walgreens is that my own Frontier internet connection is very slow and will allow only minimal downloads. When I used a Verizon Hot Spot to download pictures they downloaded without any problem. So I am working iwth Frontier to resolve my slow internet speed. The problem with pictures be syncronized to a gallery was resolved by using the Help column and the pictures were easily deleted by following their instructions.

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files Tried to do as a backeup t

I am trying to import aperture library from macbook to new imac the import window sees the external harddrive but does nt see library. I can open library as a refernce library but cannot import onto hardrive as managable files

I may be misreading what you are trying to do but you don't import libraries via the import window. You use File->Import->Library..
If this doesn't resolve your problem post back with more detail of what you are doing and what is happening.
regards

Why can't I send messages from ipad. I can read incoming text messaging but cannot reply from ipad.

Why can't I send messages from ipad. I can read incoming text messaging but cannot reply from ipad.

I Followed the instructions to correct the problem of my iPad not sending but receiving iMessages. It did not work.

HT1414 I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

I am new on the iPod 5th Gen, I have managed setting up ok, I can send emails via Mail but cannot seem to receive them ? help what am I doing wrong

Try this...
Delete the affected email account from your device.
Tap Settings > Mail, Contacts, Calendars.
Choose the affected email account, then tap Delete Account.
Add your account again.

Can ssh into client iMac but cannot mount home directory ...

I've got a server running 10.4.11 and a bunch of client iMacs (10.5.n). If I ssh into a client iMac it lets me log in but cannot mount my home directory (which lives on the server). Obviously ssh is getting my credentials from the server but isn't getting (or cannot get) the information to mount my disk. If I log in through the gui on the client it all works fine. I suspect this is less of an error and more of a design. Is there a way to get the clients to mount my home when logging in with ssh? If not then Apple presumably has a reason for disallowing this behaviour. Is there a way around this? Perhaps with mount_afp?
We want to be able to log into many client iMacs at once to run computations on them. Eventually we want to do this on a suite of XServes and XGrid. This is all very easy with linux and nfs and I was expecting the same sort of ability through OS X. I know that I can export everything from the server with nfs (though that may not solve my problem) but I only have the one system and multiple users and I can't really experiment while they are connected.
Suggestions? Comments? If there are obvious examples of this elsewhere please point me toward them.

Well it's never worked that way for me. Do you actually use this method to log in?
I've gone through all of the server logs, watching what gets added as I log on to a client. I don't see anything there that suggests it is even attempting to mount the home directory. I also watched on the client and didn't see any errors. When I ssh into a client I see the following message on the terminal, "Could not chdir to home directory /Network/Servers/server.some.place/Volumes/R1/UsersR1/username: Unknown error: 118" This suggests that the client knows where my home should be but doesn't know how to mount it.
I have enabled the basic setup on my server. User accounts have Home URLs like "afp://server.some.place/UsersR1/username" and Full Paths like "/Network/Servers/server.some.place/Volumes/R1/UsersR1" (R1 is a RAID disk). UsersR1 has been made into a Share Point and Server Admin tells me that the disk "will be automatically mounted using the AFP protocol as /Network/Servers/R1 on client machines". This part doesn't seem to be true as when I log into a client through the GUI the actual path that is mounted as my home is /Network/Servers/server.some.place/R1" (pwd in my home directory returns /Network/Servers/server.some.place/Volumes/R1/UsersR1/username which is a actually rather inconvenient).
Under the Advanced tab in the Workgroup Manager, Accounts pane, I've got "Allow simultaneous login on managed computers". This seems to work but also seems only to apply to the GUI, that is I can log onto several clients at once.
How do I ask a client machine what home directory information it is getting from the server for any particular user? Is there some setup on the client machines that will enable automatic mounting of homes through ssh? On the clients, the Directory Utility, which I have used to connect the client to a Directory Server, has a Mounts pane which allows me to "Edit automatic NFS mounts for this computer". I am not exporting any NFS from the server, but perhaps this is the way to make it work?
Perhaps what I want to requires Kerberos? I don't have that enabled.
When I have done this on a cluster of linux machines I exported the home directory from the server with NFS (exportfs) and then, using NIS and automount on the clients it "just worked". It was very simple. If it is supposed to work with Macs and OS X, it may be simple but it's not obvious.

HT3523 I can play an .mov file but cannot open it to move it to another drive/disc/etc. When we try to open it, we get a message that says "The movie file for "beanmine.mov" cannot be found. Without this file, the movie cannot play properly."

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
Help!

We can play a .mov file (a full-length film created in final cut pro) but cannot actually open it in QuickTime. We get the error message saying that a file is missing, and the movie can't play properly without the file. The thing is, we can play the film, we just can't open it to move it to another drive. Help?
Sounds like you created a "Reference" file here. I.e., a "Reference" file is a file that tells the player how to play the data contained in a "Resource" file. When you try to open the "Reference" file in the QT Player app, the first thing the player does is check to see if the "Resource" data file is is still available where it is supposed to be. (I.e., moving/deleting the resource file or moving reference file without moving the resource file to maintain the relative path between the two will generate the error message you mentioned.)
Also, can the lost file (which was deleted) be recovered from a Mac HD or an external hard drive?
That depends. Deleting a file does not actually erase the data immediately. Instead, the operating system just tells the system directory that the space containing the movie data is available for reuse if/when needed. As time passes, the chance that some of the data sectors will be re-written by other data continuously increases. To restore the file normally requires use of a special utility that both locates and restores all of the linked sectors containing the "deleted" movie data in their correct order. Other methods of restoring files would depend on the software you routinely have active on your system. For instance, do you use "TimeMachine?" or orther software that automatically backs up your data periodically? If so, then follow the instructions for your particular application to recover a deleted file.

EA3500 Phones can connect to wireless router, but cannot transfer data

Ok, Since Cisco is completely helpless on helping me (this is why we are switching from Cisco stuff to other brands like Aruba at my work) I was thinking you guys would help me. I got hanged up twice on this problem. TWICE.
So, my phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Any help. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.

The quickest way to get your phones working is to configure them staticly. More than likely........either your modem, your firewall, your router, or your ISP is blocking the proxy. Try using Google Public DNS. 8.8.8.8 and 8.8.4.4 Disable any proxy blocking features of your modem or firewall.
Sometimes simply changing the DNS on your router to Google Public DNS might fix the problem.
http://www.ehow.com/how_8275878_put-static-ip-iphone.html
http://unlockforus.blogspot.com/2012/05/how-to-use-static-ip-address-at-android.html
http://homekb.cisco.com/Cisco2/GetArticle.aspx?docid=816d2158e9e84c6da97fc236b4234ae2_3954.xml&pid=8

Am connected to orange fr, i can d/load emails etc but cannot open any webpages, Ipod Touch 5th version, latest IOS installed. Any advise please. First time I have experienced this as my Ipod works immediately elsewhere

I am connected to Orange fr, I can download emails etc but cannot open any webpages. Ipod Touch 5th vers, latest IOS installed, any advice would be most welcome. This is the first time I have had this problem as my Ipod works immediately everywhere else. My laptop does not show this problem using the same orange provider, so its obviously some setting in the Ipod :-(

Try this:
1. Double-click the Home button to reveal Task Bar at bottom
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close app
4. Re-launch the app and test
Note: If necessary close all apps in the Task Bar

I can log in to Adminstration but cannot log in to Contract management

Similar Messages

Maybe you are looking for