I can no longer burn iDVD projects or regular disc images... what's up?

When I try to burn an iDVD project it gets to the burn stage, ejects the disc, then just sits there. It says that it has one minute left. The disc is untouched and still blank.
When I try to save my iDVD project to a disc image then burn it, I get this error:
http://farm3.static.flickr.com/2482/3732704004e249c50ff2o.png
What on earth is going on here? I have read several other reports of similar behavior, but no solutions.

That generally means what it says, for which there are mostly two possible reasons:
Your laser lens is dirty: try cleaning it using a proprietary CD/DVD player lens cleaner (the type with a tiny brush - no liquids please!).
You are using a brand of media that your Superdrive doesn't like (they can by picky!). Most of us here get the most consistent results from using Verbatim or Fuji DVD-R, burned at 2x or 4x.
Additional information here, which may or may not apply:
iDVD: Troubleshooting issues with burning discs
http://support.apple.com/kb/HT1583?viewlocale=en_US
Note the link at the bottom of the page to "iDVD 6: Exceeding motion menu duration prevents burning" in case that is the source of your burning problems.

Similar Messages

I can no longer burn my mp3 purchases to a disk what happened?

We have burned several single songs that we have purchased from Amazon. As of the last months, we cannot get them to the windows burn a cd window. I try to download them, but I just get caught in a circle. I noticed that everything is mp3 now, but those used to burn to a cd. Has there been a major change with doing that?

This is an OS issue with windows and/or software you are using for your MP3's & not related to your Internet Browser, regardless of which one you are using (IE, FireFox, Chrome etc..)
Check out the site below, it's very helpful helpful with windows 7 issues & problems. It's non official thus community based such as the support forums here. Good luck.
'''[http://www.sevenforums.com/]'''

IDVD - No Audio in Disc Image

Hi,
I've started experiencing this issue with version 6.0.3. When I save my iDVD project as a Disc Image and play it on my computer, there is no audio (volume) when the video plays. First time, I didn't bother to test the disc image and burnt it to a DVD and found that there was no audio when I played it with my DVD player. But then when I directly tested the disc image, there was no audio in it either.
I went through a few posts on this discussion forum. One of them suggested using an earlier theme from 5.0. I tried that too with the same result. For some reason, there is no audio in the disc image. When I play the footage directly in iDVD, it plays fine with full audio, so I don't think there is any issue with the way it was exported from iMovie to iDVD.
I've used the same DV video camera before to import to iMovies and and then export to iDVD. I've never had this problem before. Anyone else facing this issue?
Also, I have tried exporting to Quicktime directly from iMovie and I get a pop up saying some unknown error was encountered.
Please help!

Hi,
I've started experiencing this issue with version
6.0.3. When I save my iDVD project as a Disc Image
and play it on my computer, there is no audio
(volume) when the video plays. First time, I didn't
bother to test the disc image and burnt it to a DVD
and found that there was no audio when I played it
with my DVD player. But then when I directly tested
the disc image, there was no audio in it either.
I went through a few posts on this discussion forum.
One of them suggested using an earlier theme from
5.0. I tried that too with the same result. For some
reason, there is no audio in the disc image. When I
play the footage directly in iDVD, it plays fine with
full audio, so I don't think there is any issue with
the way it was exported from iMovie to iDVD.
I've used the same DV video camera before to import
to iMovies and and then export to iDVD. I've never
had this problem before. Anyone else facing this
issue?
Also, I have tried exporting to Quicktime directly
from iMovie and I get a pop up saying some unknown
error was encountered.
Please help!
I've had the same problem (as have many others), and I've found both an odd related symptom and a weird fix, not mentioned in any of the posts I've seen. I also use iDVD6.0.3.
First, the odd symptom: after you build the non-working disk image, check the VIDEO_TS files that it produced. In my case, they all had a date-time stamp about 36 hours into the future. From a programmer's viewpoint, this looks suspiciously like a memory leak (i.e. data overflowing its allocated bounds and corrupting some program instructions or other critical data).
Second, the weird fix: I have an iBook that still has iDVD5 on board. I used that to suck in the iMovie6 project, and it built a working disk image with no problem at all. (And the dates on the VIDEO_TS files were sensible.)
In my opinion, this is a major bug in iDVD6.
iMac G4, iBook G4 Mac OS X (10.4.9)
iMac G4, iBook G4 Mac OS X (10.4.9)
iMac G4, iBook G4 Mac OS X (10.4.9)
iMac G4, iBook G4 Mac OS X (10.4.9)

Can't open saved iDVD project

I've been working on my first iDVD project for some time now using iMovie/iDVD08. The first version (movie and slideshow) works fine and I can open the associated .dvdproj file and make amendments if and as required. The DVD which was produced looks good.
However, as it's a 57-minute long movie, I was keen to introduce chapters. I used GarageBand for this purpose, sent the movie with chapters back to iDVD and added appropriate Scene menus. All worked fine on my computer. I saved the new project and retrieved it (just to be sure to be sure). All OK so far. I burned a new DVD which looks good and scene selection works great, however ....
can't now retrieve the .dvdproj. Any attempt to do so causes iDvd to hang. Activity monitor shows "Encoder server not responding." I need to force quit this process and also iDvd itself to get out of this bind. Very frustrating. I've been through this entire process now twice (recreating from first chapter-free version) and the problem recurs.
Can anybody assist?

Hello, Conor,
Welcome to the discussions.
First, you should delete iDVD's preference file. With iDVD closed, go to your home folder(YourUserName)/Library/Preferences/com.apple.idvd.plist.
Drag this plist file to the trash. Don't worry; iDVD will create a new fresh one when you relaunch it.
See if you can open your project now.
Post back if this did not work.
Now, if you had an iDVD project that burned successfully, and you still have that iDVD project saved, you should be able to open it just as you did when you were working on it. Getting that message about the encoder server not responding is strange. Your project should already have encoded since you were able to burn a DVD. That problem may be resolved by deleting the plist file. You might also try just shutting down the computer and restarting it.
However, remember that iDVD is not like iMovie where the project's contents are actually saved within the project. An iDVD project should be thought of as a virtual or alias project. Its files point to their location on your computer. So, your iMovie is not physically within iDVD's files. If you move or delete any files that your iDVD project needs, iDVD will not be able to locate them.
It is highly recommended that you do a 'save as disc image' for each of your iDVD projects. This process looks just as if iDVD is burning a disk, but it is creating a disk image that can be used to do the actual burn, using Disk Utility.
It is useful to keep your projects as their disk images to do further disk-burning of that project in the future. The disk images cannot be edited, so be sure you are completely finished editing your project before creating a disk image. A disk image is a self-contained file, so you no longer need to keep your original iMovie or iDVD projects. Keeping only the disk images will also save drive space.
http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6733.html
http://docs.info.apple.com/article.html?artnum=93006
Why do you still need the iDVD project if you have already burned your DVD? If you want to make further edits to your iMovie and burn a new DVD, you can always recreate your iDVD project.....not the simplest solution, nut once you have created an iDVD project, it is usually fairly quick to recreate it .
If you just want to burn more disks from that project, you can always use the first DVD to make a disk image of your project, and use that disk image for further burning.
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1945.html

Problem burning iDVD projects using external LaCie burner

I recently purchased a LaCie DL d2 DVD RW with LightScribe 16x from the LaCie company (12/07/2007). The LaCie burner is connnected via Firewire to my iMac. The iMac is a little over a year old and I am running Mac OS X (ver. 10.4.11).
The primary reason for my purchase was that I wished to create/burn iDVD projects on my iMac computer. The reason that I needed this product was due to the fact that, when I purchased my iMac, I made an error in judgement , and ordered it with a combo rather than a SuperDrive. So, while I am able to create iDVD projects and iMovies, I am unable to burn DVDs with of projects on the Combo Drive that came with the computer.
Thus far, however, I have not been able to burn a DVD with any of my iDVD projects. I am running iDVD 6 (ver. 6.04). When I attempt to “burn” a DVD disk the “Creating your DVD menu” appears. When I put in a blank DVD+RW 4x 4/7GB, it appears to go through the process (Prepare,,, Process Menus... Process Slideshows... Process Movies and Burn procedures). The DVD is then ejected and a message says that it is done and is “cleaning up.” However, that message never leaves the screen and when I click on the “Cancel” button, nothing happens. The iDVD application seems to lock up and I have to do a “force quit.”
I have tried this with three different projects, all with the same result. When I place the supposed “burned” DVD in the Combo Drive, it spins for a while and then kicks the DVD diskn out.
I have also tried launching Toast Titanium 7 (software that came with the LaCie burner). However, I see no place where I can “drag & drop” an iDVD project to the “drop zone.’ The closest thing seams to be “movies.” However, when I select that mode and go to my iDVD folder, all of the files are “grayed out.”
Can anyone help me out? Should I be able to burn iDVD projects with this unit? If so, what am I doing wrong.
Thanks for any help/advice that anyone can provide.
Jeff White

open up Toast 7, click on Video tab, click on Image File and drag your img. file to Toast.
John,
That's not correct. In Toast 7 you must use the Copy tab to burn a disk image to writable media. See page 94 of the Toast 7 manual.
(The procedure is slightly different for Toast 6 and Toast 8 but always involves using 'Copy')

Burning iDVD projects with external LaCie burner

I recently purchased a LaCie DL d2 DVD RW with LightScribe 16x from LaCie (12/07/2007). The primary reason for my purchase was that I wished to create/burn iDVD projects on my iMac computer. The reason that I needed this product was due to the fact that, when I purchased my iMac, I made an error and ordered the iMac with a combo rather than SuperDrive. So, while I am able to create iDVD projects and iMovies, I am unable to burn DVDs with my project.
Thus far, however, I have not been able to burn a DVD with any of my products. When I attempt a “burn” the Creating your DVD menu appears and when I put in a blank DVD+RW 4x 4/7GB, it goes through the process (Prepare,,, Process Menus... Process Slideshows... Process Movies and Burn procedures). The DVD is then ejected and a message says its done and is “cleaning up.” However, that message never leaves the screen and when I click on the “Cancel” button, nothing happens. The iDVD application seems to lock up and I have to do a “force quit.”
I have tried this with three different project, all with the same result. When I place the supposed “burn” DVD in the Combo Drive, it spins for a while and kicks the DVD out.
I have also tried launching Toast Titanium (software that came with the LaCie burner). However, I see no place where I can “drag & drop” a iDVD product to the “drop zone.’
Can you help me out. Should I be able to burn iDVD projects with this unit? If so, what am I doing wrong.
Thanks for any help that you can provide.
Jeff White

"Should I be able to burn iDVD projects with _*this unit?*_"
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you
Have you contacted LaCie Support?

I just bought my MacBookPro and IMovie keeps quitting automatically when I try to finalize or share a project. It keeps telling me I do not have enough "heap room/." What should I do so I can share and burn my project ASAP?

I just bought my MacBookPro and IMovie keeps quitting automatically when I try to finalize or share a project. It keeps telling me I do not have enough "heap room/." What should I do so I can share and burn my project ASAP?

Hi
How much free space is there on Your Mac main Start-Up hard disk ? for
• SD-video - I never go under 25Gb
• HD-material used - I guess that x5 more would do.
Even as DVD is as standard SD-Video it needs space to scale down HD and Mac OS needs lot's for it's temp. files.
I do not "Finalize" or use "Share to iDVD" - but I do "Share to Media Browser" and as Large (not HD or other resolution as this will degrade the final result)
Yours Bengt W

Since loading Lion I can no longer burn photos form iPhoto on a dvd for archive purposes

Since loading Lion on my MacBook Pro, I can no longer burn photos form iphoto for archarving purposes. I used to load the dvd and it would showup on the screen then drag highlighted photos onto the dvd. Now, dvd only shows up sometimes and when it does, it tells me the new disk is full. How can such an easy task become obsolete with this update. I have also tried using idvd for archiving purposes but this process will only allow viewing. I want to be able to reload photos back onto the computer at a later date.

I habe the same problem and cant find a helpful post on the web!
How can i get it back to work???

New - Burning iDVD projects using External Lacie Drive

My current eMac only has DVD-R capable drive and I a Lacie Firewire DVD External Drive with ability to burn DVD Double Layer.
Question how do I get iDVD to use external drive instead of internal drive to burn iDVD Projects?
Current option I can come up with is to save projects as a finished DIsc Image and then burn finished project with the Lacie.
Open to any help...
Thanks

Hello Cseijisan,
does your burner show correctly in System Profiler? If so iDVD should recognize it.
When you hit burn, iDVD should give you a little drop-down menu where you can choose your burner.
Current option I can come up with is to save projects as a finished DIsc Image and then burn finished project with the Lacie.
That is in any case a recommended procedure. Not only can you preview your DVD that way before actually burning, but it also helps eliminating burn errors, which might result from iDVDs inability to let you control the burn speed. Disk Utility or Toast are much more reliable burn apps.
hope this helps
mish

Upgraded to v. 6.0.1, can no longer burn CDs. Details below. Please help!

Like many other users, I can no longer burn CDs since my recent upgrade to version 6.0.1. I was able to burn CDs with no problems before this upgrade, but now when I click "Burn Disc", iTunes freezes with no error message. I have to exit out using Ctrl-Alt-Del, as iTunes is not responding.
I have a Gateway Profile 4 with Windows XP Pro. CD diagnostic info is below for both blank and recorded CDs.
Please help this frustrated user!!!!
Here is my CD diagnostics with a blank, recordable CD:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Gateway Profile4
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0), CDR4_XP (5.3.2.35),
UpperFilters: pwd_2k (5.3.2.35), Cdralw2k (5.3.2.35), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX/MX 400 \GeForce2 MX/MX 400
IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskHP_____psc_2205_______1.00, Bus Type USB
IDE\CdRomTOSHIBADVD-ROM_SD-R2212________________1713___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: TOSHIBA DVD-ROM SD-R2212, Rev 1713
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16.
The drive CDRW speeds are: 4 8.
And here is my CD Diagnostics with a purchased music CD:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Gateway Profile4
iTunes 6.0.1.3
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: AFS2K (3.1.21.0), CDR4_XP (5.3.2.35),
UpperFilters: pwd_2k (5.3.2.35), Cdralw2k (5.3.2.35), GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX/MX 400 \GeForce2 MX/MX 400
IDE\DiskWDCWD1200JB-00GVA0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskHP_____psc_2205_______1.00, Bus Type USB
IDE\CdRomTOSHIBADVD-ROM_SD-R2212________________1713___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: TOSHIBA DVD-ROM SD-R2212, Rev 1713
Audio CD in drive.
Found 11 songs on CD, playing time 36:13 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:20:15
Track 3, start time 07:12:17
Track 4, start time 11:10:15
Track 5, start time 14:47:52
Track 6, start time 17:57:30
Track 7, start time 21:50:42
Track 8, start time 25:46:67
Track 9, start time 28:28:45
Track 10, start time 30:18:32
Track 11, start time 33:15:50
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16.
The drive CDRW speeds are: 4 8.
Gateway Profile 4 Windows XP Pro

The answer is in the diagnostic! Go to the Toshiba site (I've been so nice and found the link for you!)
http://www.toshiba-europe.com/storage/Index.asp?page=PFT&nav=ISH_ARC&model=SDR22 12
Try updating your drives firmware. Click 'Firware Updates' on the right hand side of this page, then follow the instructions and download the update, then install. See if that helps. Its worth updating the firmware anyway :P

Can no longer burn data to CD disks

Message appears "The drive reported an error Sense Key = Hardware error sense code = 0x44, 0xD6 INTERNAL TARGET FAILURE
SINCE I INSTALLED MAVERICKS, CAN NO LONGER BURN DISKS. I had Toast 10.4 and was persuaded to upgrade to 10.09. When I downloaded and replaced my Toast folder in apps I got a message saying "unlicensed vendor" go to app store. An inferior product was on sale for £13,99.
What is going on here. Once again I am confronted by Apple "dis-abling technology. Why could I not get an upgrade from Roxio?

You have always been able to burn even copy protected tracks to an Audio CD. That hasn't changed. All tracks sold on the iTunes Store now are DRM free. Track prices now range form .69 to 1.29 but the price is unrelated to copy protection.
You may still be using the same brand/type of discs but are you still burning in the same format? When you select the playlist that you want to burn to a CD, then press "Burn CD", you get a dialog box that offers you options. Be sure you have "Audio CD" selected.
If, what you're really trying to do is burn an MP3 cd, you'd first need to make sure that all of the tracks in the playlist are mp3s. If not, you'd need to convert them. You'd need to make sure that your import settings were set to mp3 by going into Preferences>General and pressing the Import Options button and selecting the desired mp3 settings. Then, you select the tracks you want to convert, and from the Advanced menu, choose Create mp3 version. Note: this creates a new mp3 track. It doesn't change the existing track. And, it doesn't work on protected tracks. Protected tracks, as noted above, can be burned to an Audio CD which you can then use as you would any other Audio CD.
Best of luck.

Can no longer burn cds or re-install itunes

For some reason I can no longer burn a cd from Itunes. When I try to re-install itunes i get this message: 1628 failed to complete installation. I also get this message everytime Itunes starts : Warning!
The registry settings used by itunes drivers for importing and burning cds and dvds are missing . This can be a result of installing other cd burning software. Please re-install itunes.
I am able however to import with no problems.

The registry settings used by itunes drivers for importing and burning cds and dvds are missing . This can be a result of installing other cd burning software. Please re-install itunes.
for some advanced techniques for dealling with that one, see:
iTunes for Windows: Troubleshooting CD issues caused by device filters
but if you'd prefer to try some quicker and dirtier techniques (that don't involve a registry edit), post back and we can run through those as well.

Can No Longer Burn DVDs

I have a Lenovo G700 series laptop and have recently found that I can no longer burn DVDs. I can burn CDs and the drive can read DVDs & CDs.
I trawled the forums for any clue of what has gone askew including the registry fix, tried different media, different burning programs, files vs disc images and still no result.
I, and also a friend who works in IT suspect a hardware fault and, since still under warranty, contacted the support helpline who were quick to answer. went through all the options for diagnostics and came down the "hit the system with the One-Key-Recovery" option to reset it back to factory preset condition to see if that fixed it.
Problem........
I have spent a very long time getting this machine set up with my home studio software etc and have large amounts of data which beggers the question, do I want to go through all that and how do I back up all my data prior to that as the machine will be wiped with no DVD writer. I assured the guy on the phone that we we almost certain that it was the ODD hardware that had failed and could he send out a replacement?
Being still under warranty, I would have to return it to the service center where they would......... guess what, reset to factory preset prior to fitting the new hardware to ensure that the hardware was indeed faulty.
Aaaaaaaaaaaaaaaaaaaaaaaaargh!!!!
Catch 22
Why can they not just send out a replacement drive for me to fit myself?
Warranty runs out in September which is probably how long it will take me to zip and backup my data using CDs or for out a pile of cash on a USB HDD all for the price of a replacement drive.
Can someone please help?

Anyone know how I can get someone from Lenovo Customer Support to read & reply to this post? I'm not that sussed with forum methods.

Can no longer burn DVD's on my MacBook Pro

As the title says, I can no longer burn DVD's. I can burn CD's but not DVD's. I get Sense= code errors and stuff no matter what burner I try out. It doesn't always want to read the DVD's either but ejects them one- two times before it surrenders and starts reading the disc. I've had this Mac for about 1.4 years and I haven't been sitting around every day since, slotting 30 discs in and out of it all day long, i.e the drive hasn't seen that much action to justify this problem.
It can't have anything to do with the media as I've been reading a lot about since the DVD's I try to use have worked perfectly fine before this problem popped up. And I find it hard to believe that my $3200 Mac aint equipped to burn these things and especially not since it was able to earlier. It stopped burning about 2-3 months ago so my guesstimate is that one update or the other from Apple screwed things up but I have no idea how to find out what that might be or more to the point how to solve it.
So, since I strongly disbelieve the media factor ( I have tried different brands and that if it would only be able to burn Verbatim discs then that would be ridiculous ) I wonder if there's any real solution to this. Any firmware to be found for it or some such? I've tried to browse around the Downloads section but can't seem to find anything that addresses this issue. I've also googled quite a bit about it and I've found many others who experience the same problem(s) but never any real solution for it.
Any help would be greatly appreciated.
Thanks.

A lot of folks have found that running a DVD Lens Cleaner disc through can often fix this sort of calibration and sensor problem, it only takes a small spec of dirt or dust to cause errors ...

Can no longer burn audio cd's -- urgent -- is iTunes update defective?

I'm a composer-- we're getting ready to record another cd and I desparately need help here!!
I can no longer burn an audio cd from a play list! It burns but not as an audio. I also looked on directions and I'm supposed to be able to do this.
These are my tunes that I wrote and uploaded into the library and then moved to a play list
When trying to figure out what happened, I noticed that itunes had been automatically updated to the most current version on my computer --
I was still on 10.3 which doesn't support it -- I've since downloaded the 10.3.9 (plus checked other required software that's supposed to be updatyed) and still cannot burn the cd's
Please help --

I won't pretend this is a welcome suggestion...but if worst comes to worst, you could consider purchasing Toast.

I can no longer burn iDVD projects or regular disc images... what's up?

Similar Messages

Maybe you are looking for