I Can No Longer Find My Printer via AirPrint

I have an iPhone 4S with iOS 5.0.1 and an HP Photosmart 6510, both connected to the same router (it's a Comcast Xfinity Router/Modem combo) but my phone cannot pick up the printer. Any help/suggestions?

if it's an appletv 1g then you should go to settings on your appletv and remove the bind with the computer
and then set it up again
if it's the small black appletv then you don't pair them from itunes you only use it as airplay speaker and the atv access the itunes shared lib

Similar Messages

HT4356 My ipad can no longer find my printer.

My ipad is a year old brought a new printer 2months ago worked very well up until last week when my ipad can no longer find the printer. Both can find the Internet but not each other any ideas ?

try tap Settings / General / Reset / Reset Network Settings
and reconnect to your network. If its password make sure you know it before you disconnect.

Why can I print from my iPhone and not my iPad? I have been able to do it in the past and have tried a hard reset but it can no longer find the printer.

Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.

In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever.

IPad can no longer find my printer. Was working for two years. Laptop works fine

I have tried turning everything off and then on again, that used to work. Now I just get the message no airprint printer found. All software is up to date. iOS 5.1.1
Hp printer is an AirPrint printer. It is up to date and was working fine. Any suggestions?

try tap Settings / General / Reset / Reset Network Settings
and reconnect to your network. If its password make sure you know it before you disconnect.

MacBook Running OSX 10.7.4 Can No Longer Find Printer on Linksys Router

I am SO tired of trying to work with this piece of (*$& printer it's RIDICULOUS. Printing worked a couple days ago, but won't work today.
I have uninstalled the complete HP package and reinstalled it with drivers, nothing.
I have connected the printer to my MacBook with the USB cable and it finds the printer, but when it comes time to configure the wireless network and unplug the USB, it no longer finds the printer.
I went onto Apple's website and downloaded the HP print software and drivers, nothing.
I have attempted to add the printer using IP address, nothing.
I have turned off, turned on, unplugged, plugged in printer SEVERAL times, nothing.
I have tried to add the printer by way of IP address using Jetdirect, nothing.
SOMEONE TELL ME HOW TO GET THIS STUPID PRINTER TO BE SEEN BY MY COMPUTER OR I WILL BLAST HP ON EVERY MAC FORUM I POSSIBLY CAN. I spent $150 on this printer 2+ years ago and could print, scan, fax just fine. For about 6 months or a year I can no longer fax and the scanning is touch and go. Printing since about 6 months after I bought the printer has been touch and go as well. I don't enjoy spending $150 and then wasting HOURS of my time trying to figure out why the printer won't work with my computer.
Tell me what will work so I can make it work!!!!!!!!!!!!!!!!!!!!!!!

I have had EXACTLY the same frustrating experience with my MacBook OSX 10.7.4. Uninstall, reinstall, logoff, reboot, download new drivers, reinstall etc etc. Such a waste of time. My printer worked fine for 6 months, then suddenly it stopped.
Hopefully someone will have some idea of how to resolve this issue, other than to advise to uninstall/reinstall!

My mac book pro with lion finds my wireless printer on start up, but subsequently can no longer find it unless I restart my laptop. any suggestions?

my ma bookk pro fimds my kodak wireless printer on start up, but after a period of time, can no longer find it and I get a connection error. I have to restart for it to connect again to the printer. I have unistalled and reinstalled the printer software, but the problem keeps recurring. Any suggestions?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Safari 6.0.4 "broke" Share button - also Mail can no longer find the application (installed via Map App store)

Since installing the 6.0.4 Safari update via the Mac App store, I have a host of problems:
1. Mail can no longer find "an associated app" when I click on a url in a mail message
2. The Share button (extension) in the Safari toolbar no longer works
3. Any attempt to open a new url results in a new safari window being opened although in my preferences I have "open new windows in tabs" selected
4. If I click on a tab that was previously open I am continually asked to refresh the window
5. I have had about a half dozen "Safari not responding" events since the upgrade, forcing me to Force Quit - generally when I'm trying to use one of the extensions or returning to a prebiously opened tab
6. Safari is intermittently unresponsive to mouse clicks -functionality can only be restored by refreshing the page
7. Safari can no longer find my passwords for some extensions (e.g. Buffer)
8. Safari is EXTREMELY slow loading pages - stalls out a few moments after entering url (or switching back to that tab) - sometimes for as long as 2 or 3 minutes
All the Safari extensions I have were eeither pre-installed or from Apple's Safari extensions page.
The install also corrupted my iCloud (AppleID) password, but thiswas easily fixed in Keychain.
Anyone have a fix or know of any software conflicts that could be responsible?
OSX 10.8.3
Safari 6.0.4

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then uninstall them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the malfunctioning extension by reinstalling it. That will revert its settings to the defaults.

Can no longer find printer after upgrade to 10.6.7

I recently upgraded to 10.6.7 and now I can no longer find our network printer.
I am connecting by ethernet to a Konica Minolta IP-432 PS. I have updated the printer driver.
When I go to system pref to add this printer it is no longer being "found" .
Any help would be appreciated.

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

I use my time capsule for wifi station and back up. However suddely time machien can no longer find the time captule drive , used for back up...

Time machiene can no longer find the back up files on my time captule..
I have have manged to see the files via finder.
dleted the files, and also gave time captule a new name, and pasword.
All seemd fine but somehow the new back up could not be finished.
Repeated all the steps, but now had the computer hooked up to the time captule with a network kabel ( make it go quicker..)
Still no succes...
Seems somhowe acces to the time captule is difficult for the time machien software...

You may find useful advice in this post.

My ipod touch no longer finds my location via my router after ios 5 update

After I updated my ipod touch to ios5 it can no longer find my location when its on wifi using my airport express router . It has no problem when I'm using another router in another physical location... it finds its location perfectly. Only has a problem using my router at on home on my wifi network. I've seen posts online about this problem but no clear solutions. I've tried re-setting both devices as well as registering the router on skyhook but to no avail. Does anybody have any ideas about how to work around this.

- Apple no longer uses Skyhook. They have their own database and they update it from data they optain via iPhones. No one has found a way to tell Apple to add or update a router location.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings

Since the last update my iphone 5 can no longer find my devices.

Since I last updated my iphone 5 iOS to 6.1.3, airplay on my panasonic HC-57 dock has stopped working. So has my wireless HP photosmart C4380 printer ePrinter app. The iphone can no longer find either of them. I have tried rebooting. I have tried re-loading the drivers and apps. I have tried everything. Before they worked perfectly. I could play music and print whatever I wanted. I have just tried updating to iOS 6.1.4 and this has made no difference either.#
What is more, I have purchased the iphone 5 30-pin to lightning adaptor from the Apple store, and it wont let me play music on my panasonic dock through I direct connection either. It only allows charging.
Please find a solution as this change in software by Apple has rendered my new panasonic dock and printer useless.

For Starters this a user forum no Apple response to complaints on here
I suggest you start by restoring with a back up and if that fails restore as new
especially if you updated over the air rather than iTunes
A restore will install a fresh iOS 6.1.3 rather than a patch update

I have an iphone 4s and have installed the new ios download and can no longer find games and other apps that i have downloaded. Where would they be or have they been wiped?

I have an iphone 4s and have installed the new ios download and can no longer find games and other apps that i have downloaded. Where would they be or have they been wiped?

Hi,
don´t be worry, this would not be a problem.
You have to take the same Aplle ID on both devices, then you can sync them via iTunes by using all universal apps on each device, create playlists, albums and all the things you need and sync it, no problem...
cu
dienoppe

My iMac can no longer find one of the external hard drive

My iMac can no longer find one of the external hard drive. It was finding it once in awhile and during one of those times I ran Disk Utility and all was OK. Any ideas?

Well duh. I restarted the router and then it was able to find the printer. There you go. Thanks.

Can no longer discover Bonjour printer after logic board replacement

Since the logic board in my MacBook Pro was replaced, I can no longer "see" or print to an HP Laserjet 1200 printer connected to the USB port of my AirPort Extreme (ie, using Bonjour). The printer is not listed when I attempt to add a printer via the Print & Fax dialog. A Windows Vista laptop using the same network can print OK to this printer wirelessly, and I can print OK to the printer if I disconnect it from the AirPort Extreme and connect it directly to the USB port of my MacBook Pro. However, I can no longer print to this printer via a wireless connection. My internet connectivity is fine.

Took my MacBook Pro and AirPort Extreme to the Mac shop this morning. Technician was able to connect a USB printer to my AirPort Extreme and print to it from my MacBook Pro just fine. He suggested I do the following at home:
(a) Use a new cable to connect my AirPort Extreme to my USB printer
(b) Remove battery from MacBook Pro, put it back, then hold down power button for 6 seconds.
(c) Restart MacBook Pro while holding down Command + Option + P + R until I hear the chimes.
Tried all of the above steps at once, and my problem is now solved.

Can two MacBooks share a printer via just a usb hub?

can two MacBooks share a printer via just a usb hub?
thanks!

ellenfromblue bell wrote:
we have a verizon modem but not a router.
seems we could either buy a router or another printer....
any other suggestions?
Do the same thing your doing to get each computer on the Internet, one takes turns connecting the cable.
If you want both computers on the Internet and printing at the same time, that's what a router is for.
Just sub one of the PC's above for a printer and you see the idea how it all works.
A Airport Express is Mac friendly method, but if you have computers that have no wireless capability then you will need a Airport Extreme for the Ethernet outports.
You can also buy a third party router from the PC store, that works too, but it's a bit more complicated and you have to install your own firmware updates manually, no Airport Utility to do it for you. But you save money.
The important thing is setting up the router securely, WPA and WEP are both cracked. New Mac's don't even support WEP encrypted because it's worthless and false security.
What you want is:
WPA(AES) Personal with two passwords, each 20+ random letter, number, symbol characters in length. One password is used for Internet access only the other for Admin router access only, this way a user can't crack the router.
Turn off remote access, don't use hidden network or MAC Address filtering, no defense.
The long passwords are needed to defeat brute force attacks using video card based software, this type of password will take thousands of years to crack.
You can learn more about wireless networking online, have a local PC/Mac guy set you up.
Your computers are much more secure behind a router than directly connected to Internet as the router is a dumb switch, like a large security guard, only allowing certain things to pass and beating down others who try.
Also you don't wear out your Ethernet port like what your doing now connecting the cable all the time.
Good Luck

I Can No Longer Find My Printer via AirPrint

Similar Messages

Maybe you are looking for